Graphite Carbon Electrodes - Made in China Very Good Quality for EAF Furnace
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10 m.t.
- Supply Capability:
- 1000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
High Quality Graphite Electrode For EAF Furnace
Packaging Details:
1: Wooden crates with steel straps; wooden crates treated with "IPPC" label
2: standard export fumigated wooden box with steel strip fixed outside
3: In wooden case, each nipple must be packed in cardboard box.
Each electrode and nipple to preset at one end. The head of the preset nipple shall be covered by cardboard cap supported by wooden plate from both ends to avoid damage to the threads during transportation
Delivery Detail: 15-45 days after confirming the contract
Production Description:
Graphite electrode is made from the domestic first petroleum coke and high quality needle coke and widely used in the electric arc furnaces for production of alloy steels, metal and other nonmetallic materials, etc. The graphite electrodes include regular power, high power, super high power, ultra high power and square electrode. The range of diameters covers from 200mm to 700mm. Our products own the following characteristics: low electric resistance, good electric and thermal conductivity, high oxidation resistance, greater resistance to thermal and mechanical shock, high mechanical strength, high machining accuracy.
Physical and chemical index
Item | Unit | Nominal Diameter(mm) | |||
YB/T4088-2000 Industry Standard | Typical Values | ||||
300-400 | 450-550 | 350-550 | |||
Resistance | Electrode | ohm | ≤6.2 | ≤6.5 | 4.6-6.2 |
Nipple | ≤5.5 | ≤5.5 | 3.5-4.5 | ||
Bending Strength | Electrode | Mpa | ≥10.5 | ≥10.0 | ≥11.0 |
Nipple | ≥16.0 | ≥16.0 | ≥18.0 | ||
Elastic Modulus | Electrode | Gpa | ≤14.0 | ≤14.0 | ≤13.0 |
Nipple | ≤18.0 | ≤18.0 | ≤17.0 | ||
Density | Electrode | g/cm3 | ≥1.65 | ≥1.64 | 1.65-1.72 |
Nipple | ≥1.72 | ≥1.70 | 1.75-1.82 | ||
Ash content | Electrode | % | ≤0.3 | ≤0.3 | ≤0.3 |
Nipple | |||||
CTE(100-600) | Electrode | 10-6/C | ≤1.5 | ≤1.5 | 1.20-1.40 |
Nipple | ≤1.4 | ≤1.4 | 1.10-1.30 | ||
- Q: What are the skills of hardfacing process for wear-resistant alloy powder blocks?
- The power supply adopts the DC arc welding machine with steep drop characteristic, adopts the positive connection method, the electrode is negative, and the electrode is a high strength spectrum pure graphite rod,
- Q: Is the anode of electrolytic water suitable for ordinary titanium wires?
- Graphite firstFirst of all, the titanium electrode is usually not pure titanium, it should be titanium with a metal oxide coating. Secondly, the advantages of the titanium electrode is mainly to save electricity, the corrosion resistance of carbon is much stronger than that of industrial production, if the meaning is relatively large, but it is still in laboratory experiments, electrolysis of water, not what meaning.
- Q: Graphite powder produced by graphite electrode and what we usually call graphite is a kind of thing?
- Graphite electrode is mainly in petroleum coke, coke as raw material
- Q: How should carbon deposits be treated?
- It is very necessary to clean the throttle valve, clean the nozzle, and clean the carbon in the engine cylinder! However, in order to reduce the trouble of cleaning, it is best to join the regular application of graphene Moqi additive in lubricating oil for engine.
- Q: How does graphite produce solar cells?
- The team at the Massachusetts Institute of Technology has confirmed that electrodes based on graphene and ITO devices are comparable in efficiency. Although the power conversion efficiency of graphene is 4.2% lower than that of a general silicon cell, it will be competitive for special use in the future.
- Q: Graphite electrode press device
- (1) ordinary power graphite electrode, using graphite electrode with current density lower than 17A / cm 2, is mainly used in steel-making, smelting silicon, refining yellow phosphorus and other common power electric stove(2) anti oxidation coating graphite electrode. The surface is coated with an anti oxidation protective layer of graphite electrode to form a protective layer which has both conductive and high-temperature oxidation resistance, thus reducing the electrode consumption during steelmaking
- Q: What are the factors that affect the electrode wear rate of machine tools?
- Effect of processing voltage on electrode wear. The processing voltage is the average voltage between the discharge time and the gap. When the voltage is lower than the power supply voltage (voltage) 25%, electrode loss will increase, which is due to the electrode and the workpiece is too close, the discharge column energy is too large, the electrodes generate heat radiation is too strong, at the same time, there are a large number of continuous arc discharge. But the working voltage is too high (partial load processing), bad conditions of thermal effect in the gap, is not conducive to the adsorption of copper electrode of carbon graphite, destroy the covering effect. Similarly, the electrode loss increase, therefore, corresponding to different processing standards should be selected to adjust the discharging gap voltage.
- Q: Graphitized coke, graphite, broken, mixed up, how to export?
- Graphite fossil oil coke is the best smelting carburizing agent. In the steel-making industry, to produce good steel, there must be good raw materials, including good carburizing agent, and the graphitization of petroleum coke is the best carburizing agent.
- Q: I remember the more lively metal, the electron?
- Metal ion is more inert electron, graphite electrode for electrolytic salt solution containing the same amount of substance A and C two metals, C first precipitated, so C is copper. In a dilute sulfuric acid with H2 precipitation, certainly not a copper. The more active metal betatopic ability is strong, have the corresponding ion electronic ability weaker. First metal ions corresponding to metal electrons are not active.
- Q: How large is the permissible overload current per square millimeter of the graphite electrode cross section?
- The safe current is decided according to the conductor wire cooling conditions, cooling conditions, the overhead line package, an insulating layer and bare, cooling conditions are also different.
Send your message to us
Graphite Carbon Electrodes - Made in China Very Good Quality for EAF Furnace
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10 m.t.
- Supply Capability:
- 1000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
