1.European stamdard CE
3.lighter,excellent spring back ability
4.cheaper cost processing
- Q:What are the requirements for floor and exterior wall waterproofing in building construction?
- The overall waterproof design of the exterior wall shall include the following contents: 1. Construction of waterproof engineering for exterior wall; 2. Selection of waterproof layer material; 3. Waterproof structure of joint sealing
- Q:Does water paint spray fire in underground space?
- NeededWater based brand fire retardant paint thickness is determined by base material, such as wood, steel structure, etc.:1. ultra thin structure fire retardant coating (0-3mm)2. thin steel structure fire retardant coating (3-7mm), fire-resistant 2-5h3. thick steel structure fire retardant coating (7-45mm), applicable to high-rise civil buildings, columns, general industrial and civil construction, fire up to more than 3H4. mineral cotton fire retardant insulation coating
- Q:What's the difference between glass fiber and mineral wool?
- Melting natural rock or metallurgical slag in a cupola or a pool furnace, etc. by blowing or centrifuging.
- Q:What are the types of insulation materials used in pipes and equipment?
- Mineral wool is the industrial waste slag as main raw materials by melting, cotton like insulation material made by injection method and centrifugal method: cotton is a natural rock as raw material is made of mineral wool. The commonly used rock such as Xuan Wuyan, diabase, amphibolite etc..Mineral wool characteristics: mineral cotton and products is a high-quality insulation materials, has more than 100 years of production and application history. The utility model has the advantages of light weight, heat preservation, heat insulation, sound absorption, good chemical stability, no burning and corrosion resistance, abundant raw material sources and low cost:Main use of mineral cotton: its products are mainly used in the walls of dry buildings, roof, ceiling and other insulation, insulation and sound absorption, but also made of waterproof felt and pipe sleeve.
- Q:What is the difference between high-density rock wool board and hard rock wool board?
- Rock wool (mineral wool) is a natural, non-toxic, harmless green product. The utility model has the advantages of good fireproof performance and good durability, can be synchronized with the structure life, and has lower price, and can also have sound insulation effect while satisfying the heat insulation performance. Rock wool exterior insulation and insulation system, especially for buildings with high fire protection requirements.
- Q:8cm what is the sound volume of the soundproof cotton?
- You said if you want to use 8cm cotton insulation wall system to suppress the noise effect, must be added on both sides of the insulation cotton high density (or surface density) of the building materials, such as gypsum board, glass magnesium board, calcium silicate board, fiber cement board and so on. If we want to ensure that the partition wall should not be too thick, and to ensure the sound transmission loss of more than 50dB, it is not up to use the common plate, must use the Chong Ning insulation board and other professional sound insulation board, can achieve the wall thickness in the case of 100~130mm Rw, the weighted sound insulation amount reached more than 50~54dB, and the highest standards of sound insulation value reached the national standard of civil building insulation standards.
- Q:Exterior wall insulation putty powder construction needs to pay attention to what problems?
- The production enterprise of rock wool board insulation system should have professional guidance in the construction process, and cooperate with construction units and site supervision to do construction quality control work. Material access must be in accordance with specifications, quantity and quality requirements, after acceptance of qualified to storage, and should be kept by hand, is strictly prohibited open-air stacking. Curtain wall rock wool board should be overhead damp proof piling up. Plastering construction should meet the following requirements: rock wool board paste after surface treatment with plaster surface plate, scraping the mortar on the surface coated with a stainless steel spatula (thickness 1 ~ 1.5mm), and press the rock wool board surface fiber. Mortar should be configured in strict accordance with product instructions, configuration of the adhesive should avoid direct sunlight, and should be used within 2h.
- Q:Rock wool, EIA inorganic insulation mortar, polystyrene particles, polystyrene foam board advantages and disadvantages comparison?
- Rock wool (mineral wool): it is a kind of inorganic green product from natural mineral, non-toxic and harmless. The utility model has the advantages of good fireproof performance and good durability, and can be synchronized with the structure life, and the price is low. When the insulation performance is satisfied, the utility model can also have a sound insulation effect, and the fire prevention grade is level a. But the quality of rock wool is very different, and the heat preservation performance is good, the density is low, the tensile strength is low, and the durability is poor, and the paint can not be used directly.
- Q:The classification of exterior wall insulation and its main categories
- The second category is the engineering construction industry standards, external wall insulation engineering technical regulations. JGJ144 which includes five kinds of insulation system: the first is the EPS board exterior wall insulation system; second is the powder particles insulation slurry EPS exterior insulation system; third is the cast-in-place concrete wall of EPS board external insulation system; the fourth is a net cast system; fifth is the mechanical fixation of EPS steel wire the grid board exterior insulation system. With the existing external insulation insulation supporting standards, product standards and related engineering construction industry standards. The main supporting product standards are polymer based wall insulation glass fiber mesh; wall energy conservation project construction quality acceptance specification, that is, we know GB50411. Because most of these standards from 2003 to 2007 completed, but because of external wall insulation technology is developing very fast in recent years, the standard of life is short, basically all the standard in the revision, according to the development of technology, there are many standards are approved by the Ministry of construction, is being developed, the revision of the standard is JG149, the JG149 is the revision of the manuscript before the preparatory work. JG158 has just started the startup meeting and is preparing for the update.
- Q:What is the difference between ordinary slag wool rock wool board and basalt rock wool board?
- Rock wool and slag wool, chemical composition and acidity coefficient comparison in our country, the main raw material for blast furnace slag slag cotton general or other metallurgical slag, the main raw material for rock wool basalt or diabase, the chemical composition of the differences between them are larger (
We specialize in producing comprehensive chemical products and heat-preserving building materials. We are one of the leading key enterprises in researching, designing and producing refractory materials, thermal insulation materials and deadening.Our products are widely applied in thermoelectricity, construction, smelting, petroleum industry, shipping industry, space industry and refrigeration industry. Our company has passed the evaluation of ISO9001 certification. We have independent rights of import and export. Our products sell well in Europe, North America and the Middle East.
We welcome you to cooperate with us.
1. Manufacturer Overview
|Annual Output Value
||US$1 Million - US$2.5 Million
||29.00% Domestic Market
9.00% Eastern Asia
8.00% Western Europe
6.00% South Asia
6.00% Eastern Europe
5.00% Southern Europe
5.00% Northern Europe
5.00% South America
5.00% North America
4.00% Central America
4.00% Mid East
3.00% Southeast Asia
||CE Certificate;EC declaration;ISO Certificate;Fireproof Class A1;
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||21% - 30%
|No.of Employees in Trade Department
||English, Chinese, Russian
||5,000-10,000 square meters
|No. of Production Lines
||OEM Service Offered
|Product Price Range