Composite Tank from Thailand Supplier - High Quality FRP Tanks and Vessels Made in China
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 44 m.t.
- Supply Capability:
- 100000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
INSTRUCTION
FRP tanks and vessels can be largely used in many areas of the light industry, petroleum, chemical, food brewing, transportation and so on. Such product can resist the corrosion of various acids, alkalis and salts.
CHARACTERISTICS
• High mechanical strength
• High mechanical inertness
• Resistance to weathering
• Low thermal and electrical conductivity
• Long Life
• Non-toxicity
• No need for maintenance
• Light weight
DESIGN PHILOSOPHY
The correct structuring of any kind of G.R.P. tank consist of three distinct types of layers:
• Chemical Resistant Layer
• Mechanically Resistant Layer
• Outer Protective Layer
OTHER DESIGN CONDITIONS
• Working pressure, Vacuum
• Support span
• Working temperature
CHEMICAL RESISTANCE
Resistance to corrosion in aggressive environments is one of
the primary reasons for specifying GRP tanks. These, resists a
wide range of chemicals and temperatures and can be built to
provide additional abrasion, weathering and fire resistance. The
chemical resistance of GRP tank depends primarily on the resin/
glass matrix used. Other factors can affect laminate resistance
including liner construction, cure, and fabrication methodology
and installation techniques.
General corrosion, galvanic, aerobic, pitting, dezincification,
graphitic and intergranular corrosion harm metals but not GRP.
PRODUCTION RANGE
FRP small-scale storage tank: Diameter ≤ 4M
Large-scale jobsite winding vertical storage tank: Diameter 4200mm-25000mm
EXECUTIVE STANDARD
FRP small-scale storage tank
JC/T587-1995 (Glass fiber reinforced plastic storage tank)
Large-scale storage tank
HG/T3983-2007 Industry standards of Chemical Corrosion-resistant jobsite Winding FRP Large-scale storage tank
HG/T20696 Design Requirements of FRP Chemical Equipment
COMPANY INTRODUCTION
CNBM, China National Building Materials Group is a state-owned enterprise in charge of administrative affairs in china building materials industry. Established in 1984, CNBM is a large group corporation of building materials with total assets of 25 billion RMB and a total staff of 30,000.CNBM now owns 200 subordinating firms of solely owned and joint-venture companies
.
CNBM International Corporation is one subsidiary of CNBM, we focus on offering good-quality products, professional service and complete solution to our customers. Strong delivery capacity, advanced technology
& management, strong financing capability and excellent after-sale service are our advantages in sharing international market.
PICTURE S
FAQ：
Q1:How Can I Get A Sample?
A1:You can get samples by communicate with our export sales.
Q2:How Long Is Delivery?
A2:Delivery time will be30-45days according to order quantity.
Q3:What Is The MOQ?
A3:MOQ depends on different items.
- Q: What are the manufacturing processes of FRP tanks?
- The lining has the skeleton and the airtight function, is a part of the finished product. When designing the lining, pay attention to the sufficient strength and rigidity. The thickness of the inner layer is more than 3mm (see Table 1), and the resin content is greater than 80%. The corrosion resistant surface felt, short cut felt and cloth handle paste can be used for making the inner layer. Its production process is roughly as follows: mold making, mold, tank head hand paste glass fiber products, after curing, stripping adhesive, bonding head, air nozzle test, grinding, repairing, too. For the qualified lining lining molding, using two type sealing and simplified one and head connecting two. Thus, it is easier to produce a qualified lining and increase productivity than a three end combination of a sealed tail, a simplified type and a head. The key to making the qualified lining is the connection between the head and the cylinder. The head and the cylinder should be made of socket joint, because the plug joint has the advantages of high strength of joint, good performance of internal pressure, uneasy leakage and convenient assembly. As long as the socket structure is reasonable, it will not leak after use. The bonding joint depends on the resin cement and the outer FRP reinforcement. Wherein, the daub is applied between the socket and the socket and plays the first line of defense. It is made up of resin and filler, and resin has the function of adhesion and seepage prevention. It requires good toughness and higher adhesion, so epoxy resin should be used as daub. After the first line of defense, the seepage prevention mainly depends on the FRP reinforced layer. The layer consists of fiberglass products and resins. Among them, glass fiber products such as blankets and cloth between the fiber gap, can not be impermeable, can only play a strengthening role.
- Q: What are the manufacturers of glass fibre reinforced plastic storage tanks in Guangdong?
- Guangzhou Jing Hui glass fiber reinforced plastics Co., Ltd. is a large glass fiber reinforced plastic production enterprise in Southern China. It has been established for nearly 60 years and has complete facilities.
- Q: What kind of resin is used to make FRP tanks containing nitric acid?
- Concentrated nitric acid is a strong oxidant, in the presence of organic matter, sawdust, etc., can cause combustion. With trace amounts of concentrated nitric acid and oxide can almost except aluminum and chromium in special steel of all metal reacts, aluminum and chromium steel a concentrated nitric acid passivation and alcohol, turpentine oil, coke, organic slag reaction is very intense. Nitric acid is industrially produced mainly by ammonia oxidation. It is used in the manufacture of fertilizers, explosives, nitrates, etc. in organic chemistry, the mixture of concentrated nitric acid and concentrated sulfuric acid is an important nitrating reagent. The chemical formula is HNO3, hydrochloric acid and nitric acid in the volume ratio of 3:1 mixture can be made with corrosive aqua. Nitric acid anhydride is dinitrogen pentoxide (N2O5).
- Q: I am made of FRP equipment. Who needs FRP tanks?
- I am specializing in the manufacture of stainless steel pressure vessels, reactors, and may also be part of the project equipment to use glass fiber reinforced plastic equipment.
- Q: There is a storage tank, which was originally village glue, and now prepared to glue on the basis of the village glass fiber reinforced plastic anti-corrosion, can?
- No, it is decided by the characteristic of FRP. It can not stick.
- Q: Carbon steel horizontal diesel oil storage tank is made of glass fiber reinforced plastic. What kind of epoxy resin does the teacher use? Thank you
- The whole roll lining PE layer is formed at one time without seams, and the PE layer is firmly bonded with the steel body, without delamination, corrosion resistance and long service life. It is an ideal replacement for enamel, stainless steel, titanium container, aluminum container, plexiglass and plastic welding plate.
- Q: How heavy is a 200 cubic winding GRP tank?
- Although you do not know what is a storage medium, but after the purchase can find out plastic lined steel tank, can completely replace the glass steel tank
- Q: My unit recently needs 3 large tanks for hydrochloric acid. The tank, which was made of fiberglass before, is of poor quality and cannot be used for three years
- As to the problem of poor quality of FRP tanks you mentioned, I believe that is why manufacturers produced poor quality, I listen to the manufacturer's technical staff told me to identify methods of FRP tanks or glass steel manufacturers now referred to as the competition, many (especially small workshops) will use adjacent to stupid type resin instead of making the glass steel base level of PVC resin, it will lower the cost of
- Q: Are there any design standards for FRP tanks?
- There are two kinds of storage tanks, one is winding, a kind of hand LakeDifferent media are made of different resins and fibers
- Q: Why leakage occurs during the use of FRP tanks?
- In general, there may be two possibilities, namely, bad production and nonstandard use
Send your message to us
Composite Tank from Thailand Supplier - High Quality FRP Tanks and Vessels Made in China
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 44 m.t.
- Supply Capability:
- 100000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
