FRP pipe Maintenance free and Low friction coefficient for sales
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 4000 m
- Supply Capability:
- 100000 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Item specifice
PRODUCT DESCRIPTION
1.Pipe Introduction
It is the ideal product for the transportations of the chemicals, drinking water, waste water, waste gas and sewer.
2.Characteristics
• Corrosion resistance High mechanical property
• Low friction coefficient
• Light weight
• Non toxic
• Maintenance free
• Long life span
• Double O ring sealing joint make the pressurization more convenient and unique.
• Convenient and quick installation
• Long life of more than 50 years
3.Production Range
Any type and specification RPMP of diameter DN400-DN4000 and pressure PN0.25-PN2.5MPa can be produced. Also, we can provide the customized product according to user’s specific requirements.
TECHNICAL DATA
Stiffness | SN3750 | SN5000 | SN10000 | ||||||
Pressure | 0.25 | 0.6 | 1.0 | 0.25 | 0.6 | 1.0 | 0.25 | 0.6 | 1.0 |
400 | 6.1 | 6.1 | 5.9 | 6.7 | 6.7 | 6.4 | 8.1 | 8.1 | 7.87 |
500 | 7.2 | 7.2 | 7.1 | 8 | 8 | 7.7 | 11.4 | 9.6 | 9.4 |
600 | 8.7 | 8.3 | 8.3 | 9.6 | 9.6 | 9.2 | 12.1 | 11.7 | 11 |
700 | 9.7 | 9.7 | 9.4 | 11.2 | 11.2 | 10.4 | 13.8 | 13.2 | 12.5 |
800 | 11.6 | 11.3 | 10.6 | 12.8 | 12.5 | 11.7 | 15.5 | 15 | 14.2 |
900 | 13.4 | 12.5 | 11.7 | 14.8 | 13.8 | 12.9 | 19.3 | 16.4 | 15.8 |
1000 | 14.6 | 13.7 | 13 | 16.2 | 15.1 | 14.4 | 20.7 | 18 | 17.3 |
1100 | 16.1 | 14.9 | 14.2 | 17.9 | 16.5 | 15.6 | 23 | 19.8 | 18.9 |
1200 | 17.2 | 16.1 | 15.4 | 19.6 | 17.9 | 16.9 | 24.7 | 21.5 | 20.6 |
1400 | 20.4 | 18.4 | 17.7 | 22.7 | 20.5 | 19.5 | 29.2 | 24.8 | 23.8 |
1500 | 22 | 19.9 | 18.7 | 24.4 | 22.1 | 20.7 | 31.4 | 26.3 | 25.3 |
1600 | 23.6 | 21.2 | 20 | 26.2 | 23.4 | 22 | 33.7 | 28.2 | 26.9 |
1800 | 26.3 | 23.5 | 22.4 | 29.2 | 26.1 | 24.7 | 36.4 | 31.6 | 30.3 |
2000 | 27.4 | 25.4 | 23.4 | 35 | 32.4 | 29.6 | 44.7 | 37.3 | 36.1 |
2200 | 29.7 | 27.6 | 25.3 | 37.8 | 35.3 | 32.6 | 48.7 | 41.5 | 40.4 |
2400 | 32.6 | 30.3 | 28.4 | 41.8 | 38.8 | 34.6 | 53.4 | 44.6 | 42.8 |
2600 | 36.3 | 33.5 | 31.5 | 45.2 | 40.5 | 35.4 | 55.8 | 47.2 | 45.6 |
2800 | 39.6 | 36.0 | 34 | 49.4 | 45.1 | 42 | 62 | 53 | 51 |
3000 | 41.0 | 38.1 | 36.2 | 52 | 47 | 45.3 | 67 | 58.2 | 54 |
COMPANT DESCRIPTION
CNBM,China National Building Materials Group is a state-owned enterprise in charge of administrative affairs in china building materials industry. Established in 1984, CNBM is a large group corporation of building materials with total assets of 25 billion RMB and a total staff of 30,000.CNBM now owns 200 subordinating firms of solely owned and joint-venture companies.
CNBM International Corporation is one subsidiary of CNBM, we focus on offering good-quality products,professional service and complete solution to our customers. Strong delivery capacity, advanced technology& management, strong financing capability and excellent after-sale service are our advantages in sharing international market.
PACKAGING & DELIVERY
1.Packaging Details
Standard packing or your requirement
2.Delivery Detail
Shipped in 30 days after payment
FAQ
Q1.What's your sample policy?
A:We can supply the sample if we have ready parts in stock, but the customers have to pay the courier cost.
Q2.Can you produce according to the samples?
A: Yes, we can produce or modify the products according to your request.
Q3.How do you deliver the goods to my country?
A:We can provide international express, such as DHL, EMS, UPS, FedEx, etc. We select air freight and sea freight upon your requests. Quotations if without mentioning the shipping costs are shipping fee excluded.
Q4.How much does it cost to ship to my country?
A:When you goanna to place an order, please contact us, because different country has different freight.
Q5.How to get the catalogue?
A:please contact us and tell us what you are looking for.
We will try our best to meet customers' demands. Welcome you come here to visit us. We sincerely welcome partners around the world to establish business cooperation with us on the basis of mutual trust, benefit and development.
PICTURES
- Q:How is FRP ventilation pipe made?
- It should be noted that the flange and the duct shall be a whole and shall be at right angles to the axis of the wind pipe. The flanges of the air duct and its pipe end shall be formed together during the coating process. Glass fibre reinforced plastic pipe flanges shall conform to the provisions of table 5-21.
- Q:Underground garage inorganic glass fiber reinforced plastic wind pipe water out of the way?
- As basement ventilation, there are galvanized iron pipes. This kind of iron pipe ventilation pipe, in the steam condensation of weakness will be more obvious - iron sheet wall thin, internal and external temperature difference is more likely to appear.
- Q:Why more and more people choose FRP pipe?
- And the price ratio of FRP pipe is not much cheaper, and although the hardness of concrete pipe although FRP pipe to be hard, but the toughness and tensile strength is poor, the pressure is not good, and the cost is expensive, because more and more people use glass steel, and the price is expensive, with longer life.
- Q:What epoxy resin is used for anticorrosion of pipeline glass fiber reinforced plastics?
- 3PE has been anti-corrosion principle, there is no need for anti-corrosion, but now the domestic situation. Directional drilling pipe cannot be detected and repaired, the anticorrosion layer cannot have serious damage to the pipeline, long-term safety operation, it should be required for coating directional drilling: scratch resistance, abrasion resistance, impact resistance, high hardness, strong adhesion and pipeline, corrosion resistance, water resistance have a good soak, matching and cathodic protection system.
- Q:What are the disadvantages of glass fiber reinforced sand pipe?
- In brief, the disadvantage of FRP sand pipe is that the pipe is restrained by external environment, such as construction environment and span of support. Used in drinking water engineering, loess and sandy soil in the north are more suitable, but in ponds, marshes, mountains, then the pipeline backfill will increase the project investment. Used for overhead glass steel pipe lines, supporting the size of the gap is also the success or failure of the pipeline.
- Q:Uneven settlement of the foundation, can lead to glass fiber reinforced plastic underground water pipes burst, what is the principle?
- Can cause rupture. FRP material originally resistant to pressure better, tensile, shear resistance is poor, the foundation sinking is shear, I want to sink more than 5 cm, if the soil around the pipeline is compacted, it may break
- Q:What are the advantages of glass fiber reinforced plastic sand pipe than HDPE pipe?
- Advantages of HDPE tubes:1. It is easy to form the closed anti-seepage system by butt welding and electrofusion welding. When laying along the trench, the excavation of the trench can be reduced and the amount of the fittings can be reduced.2 、 light weight and easy to install;3 、 strong abrasion resistance and excellent hydraulic performance, the buried pipeline can be protected without outer layer. The utility model can be applied to the earthquake and the soil subsidence area of the mining area, and can be laid on the bottom of the river by immersion method.4 、 chemical resistance, resistance to internal, external and microbiological corrosion, corrosion resistance, and health. The utility model is suitable for conveying acid and alkaline substances, conveying sewage, natural gas, gas and other substances;5, good environmental adaptability and frost resistance. It can be used in indoor and outdoor water supply pipelines.6, long service life, with more than almost 50 years of service life;7, easy to recycle
- Q:What are FRP pipes made of?
- It has excellent corrosion resistanceDo not use cathodic protection and other anti-corrosion measures to produce two contamination of water and other media. Long service life of products.
- Q:What kind of diamond saw blade for cut glass steel pipe?
- Glass fiber reinforced plastic pipe is also called glass fiber winding sand pipe (RPM pipe). Mainly to the glass fiber and its products as reinforcing material, polymer composition of unsaturated polyester resin, epoxy resin as basic material, quartz sand and calcium carbonate and other inorganic non-metallic particles as filler materials as the main raw material. The standard effective length of the tube is 6m and 12M, and the production methods include fixed length winding process, centrifugal casting process and continuous winding process of three kinds. Classification can be carried out according to the product process method, pressure grade PN and stiffness grade SN.
- Q:FRP pipe and 0.7 thick galvanized pipe which cost is low?
- Glass steel pipeline, FRP pipe and 0.7 galvanized steel pipe glass steel pipes cost is obviously low, FRP pipe material factory manufacturing costs and labor costs are relatively low, the price is only about the same thickness of galvanized pipe 60-70%, I hope you can help!
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
FRP pipe Maintenance free and Low friction coefficient for sales
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 4000 m
- Supply Capability:
- 100000 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
