Frequency Inverter Single-phase 200V class 500KW

Frequency Inverter Single-phase 200V class 500KW

Ref Price:

Loading Port:: China Main Port

Payment Terms:: TT OR LC

Min Order Qty:: -

Supply Capability:: -

Inquire Now

Add to My Favorites

OKorder Service Pledge

Quality Product, Order Online Tracking, Timely Delivery

OKorder Financial Service

Credit Rating, Credit Services, Credit Purchasing

Technical specifications

Table 2.3: Technical Parameters of QD200 Series Frequency Inverters

ITEM		SPECIFICATIONS
Main Input	Rated voltage and frequency	Single-phase 200V class: 200V-240V,50Hz/60Hz
	Rated voltage and frequency	3-phase 400V class: 380V-480V , 50Hz/60Hz
	Allowable value of change	Voltage: 380V-15% ~ 480V+10%; Frequency: ±15%
Main output	Output voltage	Maximum output voltage equals to input voltage
	Output frequency	0.5 Hz to 400 Hz
	Overload capacity	150% of rated output current for 60s, 200% of rated output current for 2s
Control performance	Modulation mode	3-phase PWM, 2-phase PWM
	Control mode	V/f control for constant torque, V/f control for quadratic load, vector control without PG (open loop control),Energy-saving
	Setting method of run command	Outer terminal, keyboard panel or serial communication
	Setting method of speed command	Analog setting, keyboard, serial communication, UP/DOWN speed setting from external terminal
	Speed setting resolution	Keyboard: 0.1 Hz
	Speed setting resolution	Analog setting: 0.05/50Hz (10bit)
	Speed control precision	V/f control:±2%
	Speed control precision	vector control without PG (open loop control): ±0.2%
	Speed control range	V/f control 1:40
	Speed control range	vector control without PG (open loop control) 1:200
	Acceleration and Deceleration Time	0-3200.0s
	switching frequency	1.5 kHz ~ 12 kHz, according to junction temperature automatically reduce the switching frequency
Analog input	Number	2 ways: AI1、AI2
	Type	DC voltage or DC current
	Maximum input range	AI1: 0 to 5VDC, 0 to 10VDC, 0/4 to 20mA DC receivable AI2: 0 to 10VDC or PTC probe input receivable
Analog output	Number	1 way: AO1
	Type	DC voltage or DC current
	Maximum input range	Voltage output: 0 to 10V, Current output: 0/4 to 20mA
logic input	Number	0.75kw-11kW:LI1,LI2,LI3,LI4,AI1,AI2 15kW-500kW:LI,LI2,LI3,LI4,LI5,LI6,LI7,LI8,AI1,AI2 note:2 virtual logic input, capable of configuring AI1 and AI2 into logic input port (positive logic or negative logic)
	Type	Source or Sink
	Maximum input range	0-24VDC

ITEM		SPECIFICATIONS
logic output	Number	0.75kW-11kW: pulse signal output （LO-CLO）、relay output 1（T1A、T1B、T1C） 15kW-500kW:pulse signal output（LO-CLO）、relay output 1、2（T1A-T1B-T1C、T2A-T2B-T2C）
	pulse signal output	OC,output frequency、current output、ect other function
	relay output	RA-RB-RC, including a NO contact and a NC contact Maximum switch capacity: T1A,T1B: 3A at 250VAC, or 4A at 30VDC T2A,T2B: 2A at 250VAC or 30VDC
Serial communication interface		RS485 interface supports Modbus protocol.
Display	4-digit LED digital display	For display of frequency setting, output frequency, fault code and parameter setting etc.
Environment	Standard	Development of VSC200 series frequency inverters follows strict international standards and relevant recommended IEC and EN standards for control devices, especially IEC/EN61800-5-1 and IEC/EN61800-3.
	Altitude	Derating unnecessary when altitude is 1000m or below (Derating necessary at altitude higher than 1000m)
	Ambient environment	0.75kW-11kW: Reliable operation at -10 ~ 50°C without derating. When top protective cover is taken off, the environment temperature can be as high as +50 °C. Above +50 °C, the current drops by 2.2% for each rise of 1 °C in temperature. 15kW-500kW: Reliable operation at -10 ~ 40°C without derating. Storage: -25 ~ 70°C
	Humidity	No condensed water or drip at 5 ~ 95%, In accordance with IEC60068-2-3
	Impact strength	15gn for continuous 11ms, In accordance with IEC/EN60068-2-27
	Maximum antipollution capacity	Class 2, in accordance with IEC/EN61800-5-1
Structure	Protection level	Top: IP41 (without removing the protective top cover). Other parts: IP20
Structure	Cooling Method	Forced Air cooling
Installation method		Wall mounted

Q: 3.7KW inverter with 2.2KW 6-pole motor running to see the inverter shows the current is more than 4A, with the amount of clamp to 2.8A: 2, upstairs brothers to answer the correct, the basic frequency is the following constant speed torque control, load changes little, the current change is not large.

Q: How can a variable speed multi - speed three - phase asynchronous motor be controlled by a frequency converter?: With the inverter control, then you do not need multi-speed motor, because the inverter can directly control the motor speed, if the two together, the formation of a waste.

Q: What are the differences and links between the soft starters and the frequency converters, and their respective principles and uses?: Soft starters and frequency converters are two completely different uses of the product. The frequency converter is used for the need for speed control where the output not only changes the voltage but also changes the frequency; the soft starter is actually a voltage regulator for the motor to start when the output only changes the voltage and does not change the frequency. The frequency converter has all the soft starter functions, but its price is much more expensive than the soft starter, the structure is much more complex. Soft starter (soft starter) is a set of motor soft start, soft stop, light load energy saving and a variety of protection functions in one of the new motor control device, known as the Soft Starter abroad. The softener uses a three-phase anti-parallel thyristor as a voltage regulator, which connects it between the power supply and the motor stator. This circuit, such as three-phase full-bridge rectifier circuit. When using the soft starter to start the motor, the output voltage of the thyristor gradually increases, the motor gradually accelerates until the thyristor is fully conductive, the motor works at the mechanical characteristics of the rated voltage, smooth start, reduce the starting current and avoid starting the overcurrent trip. When the motor reaches the rated speed, the start-up process ends, the soft starter automatically uses the bypass contactor to replace the completed thyristor, providing the rated voltage for the normal operation of the motor to reduce the heat loss of the thyristor and prolong the service life of the soft starter , To improve its efficiency, but also to avoid the harmonic pollution to the grid. Soft starter also provides soft stop function, soft stop and soft start the process of reverse, the voltage gradually reduced, the number of revolutions gradually reduced to zero, to avoid free-wheeling caused by the impact of torque. How the frequency converter works

Q: Variable frequency pump pressure in the very low flow instability, why?: . If you want to stabilize the pressure, you must adjust the pipeline characteristic curve is the work point to enhance, so that you can both stabilize the pressure and adjust the flow.

Q: Delta VFD-F frequency converter how to adjust the number of poles: Go to the official website of some inside a detailed description

Q: Why the number of motor poles increased, the inverter capacity will increase: The number of poles of the motor is not directly related to the rated current, but the number of poles is larger and the power factor is lower and the rated current will be higher.

Q: The laptop's power adapter is broken how much it costs: Notebook adapter only for the general repair 50-100 new general 150-250

Q: The laptop's power adapter is too hot to do: Installed adapter heat should be no problem, I am now under the books, the fan mouth is very hot, the weather may be more and more hot it

Q: Laptop power adapter is used to do what: Simply put the transfer into DC China's electricity is 220V AC, and the notebook is a direct current, the need for adapter to rectify, filter, regulator, and finally we need to form a direct current

Q: 90KW inverter start 90KW, 4-pole motor and 6-pole motor j What is the difference? The inverter can be used for it?: The number of poles of the motor and the inverter is not very different, the difference is the motor speed is different

Send your message to us

*Email

*TEL

*Quantity

*Unit