FeSi65 for Casting Manufactural and Steel Making
- Loading Port:
- Tianjin
- Payment Terms:
- TT or LC
- Min Order Qty:
- 25 m.t.
- Supply Capability:
- 150000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
FeSi65 for Casting Manufactural and Steel Making
Description
Ferro Silicon is a kind of ferroalloy which is composed of ferrum and silicon. Ferro Silicon uses coke, quartz (or silica) as raw materials and is made by electric furnace. Because silicon and oxygen are easily compound into SiO2, the ferrosilicon is often used as deoxidizer in steelmaking.
Application
1. Ferrosilicon is often used as deoxidizer in steel- making.
2. Ferrosilicon also can be used as alloy elements join agent, which is widely used in low alloy steel, non-ferrous metal, bearing steel, heat-resistant steels and electrician silicon-steel.
Specification
Brand | Chemical Composition (%) | ||||||||||
Si | Al | Ca | P | S | C | Fe | |||||
<= | |||||||||||
FeSi75-A | 74.0-80.0 | 1.5 | 1 | 0.035 | 0.02 | 0.2 | Balance | ||||
FeSi75-B | 72.0-80.0 | 1.5 | 1 | 0.04 | 0.02 | 0.2 | Balance | ||||
FeSi72 | 72 | 1.5 | 1 | 0.04 | 0.02 | 0.2 | Balance | ||||
FeSi70 | 70 | 1.5 | 1 | 0.04 | 0.02 | 0.2 | Balance | ||||
FeSi65 | 65.0-72.0 | 2 | 1 | 0.04 | 0.02 | 0.2 | Balance | ||||
FeSi45 | 40.0-47.0 | 2 | 2 | 0.04 | 0.02 | 0.2 | Balance |
Size:0-3mm,3-10mm,10-100mm or as the customers’ requirements
Packing: 25Kg/bag, 1MT/bag or as your requirements.
Pictures:
If you've any enquiry, please don't hesitate to let us know.
- Q:My uncle is a hard alloy round bar. Can you tell me where to use an alloy round bar?
- I have some hard alloy round bars (tungsten steel) and high speed steel round rods (all used for cutting tools). Now I want wire cutting, laser, diamond, wire cutting
- Q:In addition, the same furnace products out, the standard sample bar is qualified, no hole, but YT14 blade has more holes, why is that ah?
- Too many factors, but according to the shape, size, number and distribution state can be roughly determined what caused by links.
- Q:Is there a material that is more wear-resistant than cemented carbide and has a relatively low cost?
- If it is numerical control tool, it is more wearable than cemented carbide: ceramic, CBN, diamondAmong them, the lowest price of ceramics, diamond prices are highest
- Q:Is nickel base alloy hard alloy?
- There are three kinds of cemented carbides used in machining,:1, YG--- tungsten cobalt alloy products, the YG6 is generally suitable for machining cast iron, roughing non-ferrous metals and their alloys and non metallic material during continuous cutting, interrupted cutting of semi fine fine cars and trucks etc..
- Q:I would like to use carbide cutting tools, car work, ordinary A3 steel or 45 steel, lathe speed to play more appropriate, the workpiece surface quality is better?
- My car operation for more than 8 years, according to your car parts, actually hit 600 on the coarse, fine car or 1600 rpm, finish good, cutting speed is not too fast, the general lathe is mid-range open 6 can, keep your car parts after.
- Q:Does the hard alloy belong to the composite material?
- Grain refinement can improve both the hardness and toughness of the material. Hard alloys and cermets belong to particle reinforced composites, which change the size of hard phase and have great influence on the properties. In this paper, the preparation process of cemented carbide and cermet raw powder with different thickness is optimized, and two sets of materials with the same original chemical composition and different grain size are prepared by vacuum sintering technology.This is not how I suggest you go to Baidu search Suzhou haokai metal material limited company to ask it!
- Q:What are the three types of commonly used cemented carbides?
- Common brands are YT5 (mass fraction of TiC is 5%), YT15 (mass fraction of TiC is 15%), with the mass fraction of TiC increased, the mass fraction of cobalt decreased, hardness and wear resistance increased, bending strength decreased. This kind of hard alloy is not suitable for processing stainless steel and titanium alloy.K class (equivalent to China's YG class), cemented carbide composed of WC and Co, also known as tungsten cobalt carbide. These alloys are mainly used to process cast iron, nonferrous metals and their alloys. The common grades are TG6 (cobalt mass fraction 6%) and YG8 (cobalt mass fraction 8%).
- Q:Where does Tianjin sell yt30 carbide tool?
- Now there are the same, express, everything is not afraid. I am the agent of Zigong the Great Wall brand cemented carbide, quality assurance, definitely authentic.
- Q:How to distinguish the authenticity of Zhuzhou diamond brand cemented carbide blade?
- In fact, now only look at the packaging has been unable to identify, because now the copycat alloy packaging has really not with what two things, want to know after the authenticity can be used, you can try to buy a small amount of alloy, the quality of clearance to buy a lot, you can go to the station to find the Alibaba China @ Rui Sen # trade. Easy% Co., reputation has been good, but sales of hard alloy Zhuzhou diamond factory, there are quality problems can return shipping.
- Q:What kind of cemented carbide is the most wearable?
- As for what kind of carbide is the most wear-resistant, in fact, mainly depends on the use of conditions, the most wear-resistant carbide materials may be more brittle, so it may not be able to use. Under the same conditions, generally speaking, the tungsten particles smaller, higher hardness, higher wear resistance. If you come up with some materials to choose from, you can choose it. Domestic materials, for exampleYG3>YG6>YG8>YG15>YG20. Imported materials are more detailed, there are V series, K series, and so on.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
FeSi65 for Casting Manufactural and Steel Making
- Loading Port:
- Tianjin
- Payment Terms:
- TT or LC
- Min Order Qty:
- 25 m.t.
- Supply Capability:
- 150000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products