DN560mm High impact PVC Pipe for water supply
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m.t.
- Supply Capability:
- 2000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Specifications
1. Length: 6m, 12m or In compliance to your requests
2. Pipes are available in the form of coils or straight lengths
3. A comprehensive range of pipe fittings are always held in stock.
2.Packaging & Delivery
Packaging Detail: | standard packing for export or as requested |
Delivery Detail: | 1~5weeks |
3.Features:
· Facilitating high resistance to loadings, pressure and vacuum with high tensile strength,
· Enabling high resistance to corrosion,
· Not requiring cathodic protection,
· Less operating cost since cast pipes have larger nominal diameter than polyethylene pipes.
· Being the best pipe in case of an earthquake, with its ability of resilience and resistance to impacts without deformation,
· Long product life, exceeding 50 years,
· Preserving the quality of water with healthy interior coating.
4.size range
Weight(kg/m) | Weight(kg/m) | Weight(kg/m) | Weight(kg/m) | |||
Wall thickness(mm) | Wall thickness(mm) | PE80 | PE80 | PE100 | PE100 | |
Nominal Outside Diameter(mm) | SDR17.6 | SDR11 | SDR17.6 | SDR11 | SDR17.6 | SDR11 |
20 | 2.3 | 3.0 | 0.132 | 0.163 | 0.133 | 0.164 |
25 | 2.3 | 3.0 | 0.170 | 0.211 | 0.171 | 0.212 |
32 | 2.3 | 3.0 | 0.222 | 0.278 | 0.224 | 0.279 |
40 | 2.3 | 3.7 | 0.283 | 0.430 | 0.284 | 0.432 |
50 | 2.9 | 4.6 | 0.438 | 0.666 | 0.440 | 0.670 |
63 | 3.6 | 5.8 | 0.686 | 1.053 | 0.689 | 1.058 |
75 | 4.3 | 6.8 | 0.975 | 1.470 | 0.980 | 1.478 |
90 | 5.2 | 8.2 | 1.411 | 2.130 | 1.419 | 2.141 |
110 | 6.3 | 10.0 | 2.084 | 3.159 | 2.095 | 3.176 |
125 | 7.1 | 11.4 | 2.670 | 4.098 | 2.684 | 4.120 |
140 | 8.0 | 12.7 | 3.347 | 5.108 | 3.364 | 5.135 |
160 | 9.1 | 14.6 | 4.368 | 6.705 | 4.391 | 6.740 |
180 | 10.3 | 16.4 | 5.549 | 8.474 | 5.578 | 8.519 |
200 | 11.4 | 18.2 | 6.817 | 10.451 | 6.853 | 10.505 |
225 | 12.8 | 20.5 | 8.596 | 13.228 | 8.641 | 13.298 |
250 | 14.2 | 22.7 | 10.611 | 16.268 | 10.666 | 16.354 |
280 | 15.9 | 25.4 | 13.274 | 20.396 | 13.343 | 20.502 |
315 | 17.9 | 28.6 | 16.804 | 25.818 | 16.892 | 25.953 |
355 | 20.2 | 32.3 | 21.398 | 32.861 | 21.510 | 33.033 |
400 | 22.8 | 36.4 | 27.164 | 41.706 | 27.306 | 41.924 |
450 | 25.6 | 40.9 | 34.320 | 52.688 | 34.499 | 52.964 |
500 | 28.4 | 45.5 | 42.311 | 65.135 | 42.533 | 65.476 |
560 | 31.9 | 50.9 | 53.169 | 81.583 | 53.447 | 82.010 |
630 | 35.8 | 57.3 | 67.134 | 103.347 | 67.486 | 103.888 |
5.size range (water pipe)
Pipe series | Pipe series | Pipe series | Pipe series | Pipe series | Pipe series | |
SDR11 | SDR13.6 | SDR17 | SDR21 | SDR26 | SDR33 | |
Nominal pressure(bar) | Nominal pressure(bar) | Nominal pressure(bar) | Nominal pressure(bar) | Nominal pressure(bar) | Nominal pressure(bar) | |
PE80 | PN12.5 | PN10 | PN8 | PN6 | PN4 | |
PE100 | PN16 | PN12.5 | PN10 | PN8 | PN6 | |
Nominal Outside Diameter(mm) | Wall thickness(mm) | Wall thickness(mm) | Wall thickness(mm) | Wall thickness(mm) | Wall thickness(mm) | Wall thickness(mm) |
20 | 2.3 | |||||
25 | 2.3 | |||||
32 | 3.0 | |||||
40 | 3.7 | |||||
50 | 4.6 | |||||
63 | 5.8 | 4.7 | ||||
75 | 6.8 | 5.6 | 4.5 | |||
90 | 8.2 | 6.7 | 5.4 | 4.3 | ||
110 | 10.0 | 8.1 | 6.6 | 5.3 | 4.2 | |
125 | 11.4 | 9.2 | 7.4 | 6.0 | 4.8 | |
140 | 12.7 | 10.3 | 8.3 | 6.7 | 5.4 | 4.3 |
160 | 14.6 | 11.8 | 9.5 | 7.7 | 6.2 | 4.9 |
180 | 16.4 | 13.3 | 10.7 | 8.6 | 6.9 | 5.5 |
200 | 18.2 | 14.7 | 11.9 | 9.6 | 7.7 | 6.2 |
225 | 20.5 | 16.6 | 13.4 | 10.8 | 8.6 | 6.9 |
250 | 22.7 | 18.4 | 14.8 | 11.9 | 9.6 | 7.7 |
280 | 25.4 | 20.6 | 16.6 | 13.4 | 10.7 | 8.6 |
315 | 28.6 | 23.2 | 18.7 | 15.0 | 12.1 | 9.7 |
355 | 32.2 | 26.1 | 21.1 | 16.9 | 13.6 | 10.9 |
400 | 36.3 | 29.4 | 23.7 | 19.1 | 15.3 | 12.3 |
450 | 40.9 | 33.1 | 26.7 | 21.5 | 17.2 | 13.8 |
500 | 45.4 | 36.8 | 29.7 | 23.9 | 19.1 | 15.3 |
560 | 50.8 | 41.2 | 33.2 | 26.7 | 21.4 | 17.2 |
630 | 57.2 | 46.3 | 37.4 | 30.0 | 24.1 | 19.3 |
710 | 52.2 | 42.1 | 33.9 | 27.2 | 21.8 | |
800 | 58.8 | 47.4 | 38.1 | 30.6 | 24.5 |
6.FAQ
Q:What the Raw material?
A:We use 100%Korea material.
Q:What is you MOQ?
A:As customer’s request.
Q:What is the production ability? or delivery time?
A:Our production ability support 40HQ order finish in one week.
Q:What is the regular shipping port?
A:Tianjin or Shanghai.
Q:What is your payment?
A:TT or CC.
Q:Can we have sample?
A:Sample free, freight cost you.
Q:For urgently doubts,who online?
A:Sales and marketing Manager 24hours online service.
- Q:Hello I want to buy a leather storage tube for my A1 sized drawings. I'm studying architecture and I want something a bit more classy than the plastic tubes I have found. Does anyone know where I can buy one?
- Cost Was this what you were looking for?
- Q:A 0.596 kg metal cylinder is placed inside the top of a plastic tube, the lower end of which is sealed off by an adjustable plunger, and comes to rest some distance above the plunger. The plastic tube has an inner radius of 7.07 mm, and is frictionless. Neither the plunger nor the metal cylinder allow any air to flow around them. If the plunger is suddenly pushed upwards, increasing the pressure between the plunger and the metal cylinder by a factor of 2.31, what is the initial acceleration of the metal cylinder? Assume the pressure outside of the tube is 1.00 atm.Please answer in m/s^2. Thank you!
- Before the sudden push, the net force on the metal cylinder is zero. This means downward force = upward force p0 A + m g = p A, where p0 is atmospheric pressure, p the pressure of the trapped air, m the mass of the metal cylinder, g the acceleration due to gravity and A the inner cross sectional area of the plastic tube. If the pressure p is momentarily increased to 2.31 p, then there is a net upward force of magnitude Fnet_up = 2.31 p A - p0 A - m g = 1.31 p0 A - 1.31 m g This net force gives rise to an acceleration that obeys Newton's second law: m a = Fnet m a = 1.31 p0 A - 1.31 m g a = 1.31 p0 A /m - 1.31 g = 1.31 * 1.01*10^5 N/m^2 * ( pi * (7.07*10^-3 m)^2 ) / 0.596 kg - 1.31 * 9.81 m/s^2 = 22.0 m/s^2
- Q:Can plastic tubes be used for storing chemicals?
- Yes, plastic tubes can be used for storing chemicals. However, the choice of the plastic material and its compatibility with the specific chemical being stored is crucial to ensure safety and prevent chemical reactions or degradation of the tube material.
- Q:Do plastic tubes have any limitations in terms of clarity or transparency?
- Yes, plastic tubes do have limitations in terms of clarity or transparency. While some plastic materials can be highly transparent, certain factors such as the type of plastic used, thickness, and manufacturing processes can affect the level of clarity. Additionally, over time, plastic tubes may become discolored or scratched, further reducing their transparency.
- Q:What is the hard plastic material?
- PPS, the Chinese name is pps. The utility model has the advantages of hard and crisp, high crystallinity, burning resistance, good thermal stability, high mechanical strength, good electrical performance, etc..
- Q:What is the diameter range of plastic tubes?
- The diameter range of plastic tubes can vary widely depending on the specific application and manufacturing process. However, they typically range from a few millimeters to several inches in diameter.
- Q:Can you smoke hookah with just a plastic tube?
- no, you need something to put the hookah in, and you need something to light it. And you don't want to burn the plastic and breathe the fumes!
- Q:Are plastic tubes suitable for pharmaceutical packaging?
- Yes, plastic tubes are commonly used and suitable for pharmaceutical packaging. They offer advantages such as ease of use, durability, and the ability to protect the contents from moisture, light, and contamination. Additionally, plastic tubes are cost-effective and can be easily customized to meet specific packaging requirements.
- Q:Are plastic tubes suitable for use in the automotive fuel system?
- No, plastic tubes are not suitable for use in the automotive fuel system as they are not able to withstand the high pressures and temperatures associated with fuel delivery.
- Q:i squished and kneaded the soft plastic tube but the toothpaste still came out in 3 seperate colors. i cut the tube and didnt see dividers. how does this work?
- I like the elf idea. That seems to make the most sense.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
DN560mm High impact PVC Pipe for water supply
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m.t.
- Supply Capability:
- 2000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords