Q:250 type curtain wall glass connection pawls how much punch

Specifically according to the use and the thickness of the glass with the corresponding fitting, generally can open 40 ~ 50mm hole on the OK, the specific best to consult the supplier to clear the relevant parameters and then open the hole, there are holes to open a little So easy to adjust when the construction.

Q:Members of the master is good, I want to pull the claw side of the stainless steel support the side of the glass, one side installed in the antiseptic wood, please practice in the anti-wood that side how to install, how fixed on the wood preservative.

The appearance of the glass curtain wall with the connection of the pawl is transparent, and the interior space and the outdoor environment are fused due to the lack of wall and good lighting. Split claws support structure and diverse, to meet the needs of different building structures and decorative effects. Part of the split jaw pieces with spherical hinge connection, with the ability to absorb deformation, in the security also has a great protection.

Q:Curtain wall claw claw how much appropriate? How much is a square? Please professional answer, plus points plus points

250 series of four claws of the 480, two claws of the 300, single claw of 190. This is the price is more expensive, Kennedy commonly used splicing a 60 dollars, a base is 60.

Q:Curtain wall decoration line junction how to take a good connection

AFA Binders are architectural adhesives for unique formulations of OKorder Eau De Toilette Decoration Engineering Co., Ltd. (formerly Alfa Wall Decoration Engineering Co., Ltd.).

Q:Glass curtain wall claw should be how to calculate the size

In general, our factory will be based on the customer's glass area and glass thickness, to advise customers to choose what specifications of the split jaws, common splicing claw specifications are: 150.160.200.220.250 and so on. Be sure to choose the appropriate type and specification of the splicing jaws so that both price and performance are guaranteed

Q:304 stainless steel splicing claws the price is how much, what quality and cheap manufacturers

304 stainless steel splicing claw is not expensive, if the amount of large manufacturers suggested that the cooperation, 304 material cost-effective, widely used.

Q:Is there a stainless steel splicing claw with the same price but cheaper manufacturers?

Some, a lot of It's harder to find than it is.

Q:How to do the size of the glass shed with stainless steel claws

According to the size of the selected splicing claws on the joints.

Q:What is the difference between tempered glass shed and tempered glass and canopy sunshine shed?

Light steel glass canopy focus on just the material for the light steel, tempered glass canopy focus on the glass material for the tempered glass, are glass canopy, but the name of the focus is not the same, light steel glass canopy glass can also be used Glass ah The loads of light steel canopy include the weight, wind load, snow load and live load, in which the snow load is not taken into account, the wind pressure is positive or negative, a certain range of negative pressure is beneficial to the structure, the actual calculation Considered separately. Through the comparison, the design and calculation of the most unfavorable conditions of the combination of the dead weight, the wind load and the live load are carried out, including the calculation of the force combination of the glass and steel glass sheds, the calculation of the glass strength and the checking of the glass deflection, and finally the selection of the material The In the light steel glass canopy glass plate drilling processing, the connection part of the support device in advance openings, add water seal ring processing, to avoid the site to produce a higher stress concentration. Light steel glass canopy should be wiped clean before the surface, and according to the weight of the glass to determine the reasonable number of suction cups to ensure the safety of construction. By connecting the jaws to connect the glass, the installation should be checked before the glass drilling and splicing claws connected to the casing position, and timely adjustment. After the glass is fully installed, check the flatness and verticality of the light-glass glass canopy, the glass seam, and the width of the light-glass glass canopy to meet the needs of the shed in the temperature change and the structural displacement. Touch the request at the same time in the seam when the tensile deformation of their own to meet the temperature changes and structural lateral displacement of the joints to widen the requirements.

Q:The kind of glass that is attached to the pawl, I would like to ask how the size of the glass is accurate? Starting from that point?

Most of the use of tempered glass for the use of curved glass, to provide the glass glass size: curved arc length; chord length; arch height; radius; there is the other side of the length can be!