Constant Current Adjustable LED Driver with Dimming Function for LED Lighting,12V50W
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT or LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 10000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
The DCCP-DPR series is designed for LED indoor and outdoor lighting application condition, such as road lighting, landscape lighting and billboard lighting etc. It has the feature of high efficiency, high control accuracy, portable volume and fully waterproof design. The load control mode can be set freely.
Features:
· Wide input voltage range：
DC9.5V—DC33V, compatible with 12V/24V full voltage range
·Input surge suppression function. Peak surge current is less than 15Amps
·Digital high precision constant current control and the control accuracy are better than ± 2%
·Max. conversion efficiency is 95%
· Adjustable rated output current in the rated power and current range
· Triangular timers output control , and dual exact timers output control ,and the output parameters can be programmed at each timer
· The RS232 serial port (TTL) for connection via the open standard Modbus protocol
· Fully encapsulated design, IP67 protection
Electronic protections:
· Load overload
· Overheating
· Input reversed polarity
· Load short circuit
Load control mode:
· Remote manual control (Default ON)
· Three time interval control
· Clock time control
Specification:
Model | DCCP10060DPR |
Nominal system voltage | 12 / 24VDC |
Input terminal voltage | 9.5V~33.0V |
Rated output power | 50W/12V , 100W/24V |
Rated output current | 3.3A |
Load current | 100W/Load voltage |
Max efficiency | 93%/12V; 95%/24V |
Output voltage range | Exceed voltage of input and < 60.0V |
Load open circuit voltage | 60.0V |
Power output adjustment time | <10s |
Self-consumption | ≤8.5mA(12V); ≤11.0mA(24V) |
Control accuracy | ±2% |
Communications | RS232（TTL） |
Enclosure | IP67 |
Overall dimension | 108.5x82x25.6mm, 4.27x3.22x1.01inches |
Mounting holes | 100(3.94) mm/inches |
Power cable | 1.5mm2 |
Net weight | 0.39kg |
Working temp. | -35℃~+55℃ |
Storage temp. | -35℃~+80℃ |
Humidity | ≤95% (NC) |
FAQ:
Q1. What is the voltage?
A1. Our 45/60A solar charge controller is 12/24/36/48V auto work.
Q2. What is the difference between MPPT&PWM?
A2. MPPT has higher efficiency, it can track the max power point and won't waste energy.
Q3. What is the efficiency of the MPPT controller?
A3. MPPT>99%, peak conversion efficiency>98%.
Q4. What is the waranty of product?
A4. 12 months.
Q5. What protection does your MPPT controller have?
A5. PV array short circuit, PV reverse polarity, Battery reverse polarity, Over charging, Output short circuit.
- Q: The whole circuit is powered by a low voltage, insufficient current supply (for example, LED current is small, brightness is not enough, after amplification work properly), so how to use triode to enlarge?
- In a common emitter circuit, the simple point is to control the large Ic with a small Ib. The current magnitude of the load is Ic, which is opposite to the phase.
- Q: Dell 1420 uses other people's HP charger charging, found that the socket is the same, can you, will damage the machine? Please expert advice
- Just the same interface.Take a look at the two notebooks. The nominal output voltage on the charger is not the sameThe nominal output current of a power supply, the output current can not be more than a small notebook power by the power of the original.In addition, the polarity of the interface sleeve, whether it is positive, negative or negative, is not the same.If the above three items are in line, then that will be fine.
- Q: Computer host power can be disassembled to do other power use? How to connect?
- The main power output voltage of the main engine is DC+12V generally provides power for hard disk drives, optical drives, floppy drives, spindle motors and track motors, and provides logic levels for circuits such as operating voltage and serial ports for ISA slots.The voltage of the -12V is to provide the logic level for the serial port+ 5V power is supplied to the working voltage of CPU and PCI, AGP, ISA integrated circuit, the computer is the main work of power supply.The -5V also provides a level of judgment for the logic circuitThis is the 3.3V ATX power set, providing power for memory.+ 5VSB (+5V standby power) ATX power supply through the PIN9 to the main board + 5V720MA power supply, this power supply for the WOL (Wake-upOnLan) and boot circuit, USB interface and other circuits to provide power.You can use it according to your needs.
- Q: My laptop power supply is good and bad. If the output voltage is the same, the output current is almost the same. Can the non notebook power supply instead of the notebook power supply?
- This is OK, but it's better not to use it for a long time. In most cases, as long as the output voltage and current, the output line DC connector is the same as the original charger, different brands of chargers can use.Battery maintenance:1, when there is no external power supply, if the work condition temporarily can not use the card in the PCMCIA slot, it is suggested that the card be removed first to prolong the battery use time.2, room temperature (20-30 degrees) for the battery the most suitable operating temperature, the temperature is too high or too low operating environment will reduce the battery life.3, the use of laptop batteries in a stable power supply environment, the removal of batteries can extend the battery life is not correct. As far as the ASUS laptop is concerned, the charging circuit in the battery will automatically shut down when the battery is fully charged, so there will be no overcharge.4. Suggest an operation of battery power correction on average three months.5. Refer to the international voltage indication when using the power adapter.
- Q: Can the motherboard closed at the same time and starts the 2 power supply when I stay alone like CD-ROM boot directly on the chassis key at the same time start time 2 power down and turn off the 2 power so you need to connect??
- But you can, but to DIY, the motherboard has a 24 pin line is the transmission of BIOS signals to power, is also the starting signal, you will find out the line and put together, should it be received while starting signal can start power supply
- Q: Machine power I have a 180W I want to put the independent power it used to do my computer water cooling system is connected to the first after I have no electricity out of 12V or 24 is not my power is absolutely fine. Just don't know when the 220V electric power supply in how to manually open the power?????
- It's the same. They're all standard sockets.Please refer to it. I hope I can help you.
- Q: What is the volt power used in South Africa (home use)? How do you like it?
- Nauru 220V three flat occasional blackouts, unstable voltage regulator precision electrical equipment should be configuredSalomon 220-250V three flat type power supply is not stableTuwaru 220-240V three eight type power supply is normalKiribati 240V three flat type power supply is not stable
- Q: Can mobile phone batteries be replaced by other power sources? Deep technology, please
- The circuit inside the board has a ID resistor (identification resistor). The main board of the mobile phone detects the value of this resistor in the range. It is the legal battery. The purpose is to protect the security,
Send your message to us
Constant Current Adjustable LED Driver with Dimming Function for LED Lighting,12V50W
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT or LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 10000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot Searches
Related keywords
