•Product details •
Many colors for choice
|Category||UVS decorative board|
( Can be customized)
| 1.5-2.0 g/cm³|
| Standard Size |
(Other size can be customized)
| Washability||Without leakage after wiping for 100times||Adhesive force,level||0|
| Freezing resistance||Without crack and delamination after 25 freeze-thawcycles||Thermal Conductivity|
| Standard Data of the Middle Density Firber Cement Board|
|Standard Size||1220X2440mm/1200X2400mm||Max Width||1250mm||Max Length||4880mm|
| Wet Expansion Rate||≤0.23%|| Water Penetration||≤25%|
| Forst Resistance|| No Layer & no cracks after 25 cycles under freezing and thawing |
| Incombustibility|| Incombustible Class A1|| Radioactivity|| Decorative materials Class A|
| Flexural Strength|| Air dried Condition ≥18|| Water Penetration|| Back side without water drop after 24 hours |
| Saturated Condition≥14|
(1)Cavity Wall for Interior Partition
1.Wet area( restroom,kitchen and basement etc.)
2.High sound insulation requirements area ( pc room,meeting room and hotel etc.)
(2) Light Concrete Grouting Wall
(3) Other Applications
1. Ceiling board
2. Perforated board
3. Aluminum lining boards and insulation barriers for high-speed train
4. Column Coverage
1.Base material board, insulating material, air layer and framework compose the ventilated cladding system. The system has the capability in aeration, balancing the wind pressure, keeping the function of the system with warm and thermal insulation, resisting typhoon, reducing rain leaking from the framework and exterior wall.
2.Base material board is good at anti-impact and it has high bending strength. It is especially suitable to used as the cladding and façade of the seaside building, Chinese, Japanese, American, European and Korean and other luxury villas and multi-storey luxury residential buildings. And it is also suitable for partition in schools, supermarkets, theaters and some other high flow density places.
3.Outstanding sound insulation of the Base material board system, it can be used as indoor partition and suspended ceiling for high demand in private request as sound insulation, such as five-star hotel, bedroom and public entainment places.
4.The smooth surface of the board can improve the decorative effect of the building. It can be used in both new and old building refashion.
6 or 9
Remark: we can also supply other specifications as the client’s special requirement.
No cracking or delaminating
25 times of freeze-thaw cycles
No Water Forms after being tested
24h 24 hours
Full water condition
No continuous cracking after one impact
Remark; please contact our technical department if you need more technical index.
100% asbestos free
Safe for application
Safe for application
Safe for application
The highest grade
- Q:Fuqing plate quality how
- Fuqing plate quality is still very good, listen to the sale of Fuqing plate market, said: "Fuqing" brand is China's first registered trademark in Japan plate enterprises, Fuqing exports of Japanese sheet metal and similar products accounted for the country First, "Fuqing sheet" comprehensive through the ISO9001 international quality management system certification, the Chinese environmental labeling product certification, FSC forest certification, Japan's highest level of quality management system JAS certification, the product has reached Japan F ★ ★ ★ ★ level, the European E0 Environmental standards.
- Q:What is the integrated ceiling UV board
- Is a kind of craft, like love home integrated ceiling heat transfer the same
- Q:Millet duck bathroom sheet durable?
- This product is the pioneer of smart bathroom, high-end products, but excellent quality, but also atmospheric fashion.
- Q:What kind of timber is the high grade guitar?
- General top or advanced guitar wood selection surface is not particularly large, generally fixed in several kinds of wood, the production of guitar is very much but in the high-grade guitar selection, the available is not particularly much (in addition to some special Creative thinking of the producer's whim). Here I give you a closer look:
Spruce spruce sound grain good, penetrating, cool and bright. It is the first choice for most guitar panels, which is made of German-made (Sicilia spruce) and Canadian (Inman Spruce), with high density, woody charm, hard and easy to process. The Representative Brand: H.Romannillos, Hauser, Martin, Taylor, Gibson.
Cedar cedar sound deep atmosphere, strong sense of sticky, soft and warm. It is good for American-made (western pine) and Canada (Ingersel Cedar), high density, fine grain and delicate, easy to process, and now many guitar makers prefer wood (easy to process). ...). On behalf of the brand: Greg.Smallman, Kenny.Hill, Takamine, King of Recording.
- Q:With Altium design PCB, the information required: sheet thickness of 1mm, copper thickness of 0.35um, how to set up Altium?
- The thickness of the copper layer is used to set the thickness of each layer of copper, the default is 0.03556mm, which is 1 ounce, core is set the thickness of the substrate, if it is multilayer will have Prepreg, the default substrate thickness is 0.32004mm, these are all you can change to the value you actually need. Of course, you can not use the additional requirements of the document to give the plate specification.
- Q:How can we distinguish between good and bad plate quality?
- Can be distinguished by the following steps and methods:
First is "see", but also to see the focus. Good plate surface smooth and smooth, the edge of the board is very clear. As well as the packaging on the plate is clear, the above name, address, grade, specifications and other information are complete, not clear, incomplete information or more attention to the plate, and may be added to the color of the plate.
Two smell, because the legendary formaldehyde is released from the plate, will directly affect people's health. Good plate not only good choice of materials, but also for the adhesive glue is environmentally friendly, even if the number of more stacked together, it will not emit a very pungent taste. If the choice of a plate placed in the home there is a very obvious pungent chemical smell, it should be noted.
Three saws, before the purchase can be a small sample to the business, and then cut it to see its inner core, a good plate section level is very clear, because it is a layer of paste a very tight, very good convergence, and those miscellaneous Wood stitching the poor quality of the plate core is not dense, must not buy.
Four test, through the relevant identification agencies, with professional tools and related technical means to identify the plate to determine the quality of good or bad, this method is more professional and accurate. Plate material is also an important factor is the moisture content, the general moisture content of the plate should be less than 16%, if too high that is not good, may be a while will be mildew or deformation.
- Q:Ready to book shelves, how to calculate the area and how much plate!
- This is not very simple: horizontal plate 3.5x0.3x6 block, riser 2.2x0.3x10 block, followed by 2.2x3.5x1 block (later suggested that you do not), fixed corner 80 (also can be used a little bit, but slightly rigid Bad), in fact, on the left side of the figure in a separate meaningless, only to provide recommendations
- Q:Jumping rabbit plate quality is good
- Jumping rabbit plate good rubber is not how kind, thin, but also with a little edge skin, the overall use of the down is not how
- Q:What does the plate open?
- Sheet material is based on their own use of the drawings size, the large plate into a process to meet their own size.
- Q:What are the plates?
- The types of plates are solid wood and wood-based panels. First, solid wood: 1, solid wood puzzle: semi-artificial system, the method that is taken from the solid wood, with glue to tooth or straight fight spell out of the artificial plate. Building used in the template is also solid wood, but generally made with Zamu. 2, solid wood: directly to solid wood saws, dried from, without stitching, there are specifications for sale. Second, wood-based panels: 1, MDF: sub-high-density fiberboard, medium density fiberboard, low-density particleboard three, of which high-density board generally hand-made composite floor, doors, MDF used for furniture, furniture In the furniture are generally made in the MDF substrate. Low-density particleboard, also known as particleboard, is also very popular in the furniture, especially office furniture often used. Thickness, respectively, high-density board: 8 to 12 mm thick MDF: 3,5,12,15,18,25 mm several thickness; particleboard generally have: 9,12,15,18,25 mm several thickness The Flat specifications are generally 1220 * 2440 and 1800 * 3600 two, high-density board is not set. MDF is also used to make melamine board, that is, with the MDF to do the substrate, in the above with a machine pressure on a layer of 0.3mm thick melamine paper made. Substrate high school density and particleboard have, the composite floor is made of high density plate pressure melamine paper made of three, blockboard and plywood: blockboard also known as big core board, that is, with solid wood fight plate, on The following pressure made of a layer of veneer, often used in the decoration for the use of load-bearing materials, in fact, it can be considered a kind of splint, the standard thickness of the general 16 mm plywood, that is purely cut with a layer of veneer Respectively, 3,5,12,15,18,25 and other, specifications are generally 1220 * 2440 mm
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range