Cast Steel Flanged Gate Valves
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 20 Sets pc
- Supply Capability:
- To Order pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Cast Steel Flanged Gate Valves
Specifications Of Cast Steel Flanged Gate Valves:
Nominal Diameter: DN15~200mm
Nominal Pressure: 1.6MPa
Suitable Medium: water, steam, oil
Suitable Temperature: ≤100°C
Type of drive: hand lever, worm gear, electric
Body And Bonnet Connection Of Cast Steel Flanged Gate Valves：
The body and bonnet of Class 150-Class 800 globe valves are usually with studs and nuts,And the body and bonnet of Class 1500-Class 2000 globe valves are usually of pressurized seal design.
Back Seating Design Of Cast Steel Flanged Gate Valves:
All our globe valves have the back seating design. In most cases, the carbon steel globe valves is fitted with a renewable back seat. For stainless steel globe valve, the back seat is machined directly in the bonnet or is machined after welding. When the globe valve is at fully open position, the sealing of the back seat can be very reliable. However, as per the requirement of API 600, it is not advisable to add or change packing by the mean of back seating when the valve is pressure containing
Design Feature Of Cast Steel Flanged Gate Valves：
Rational structure, reliable sealing, excellent performance, pretty appearance.
Co-radix alloy welded sealing surface, anti-wearing, erosion-proof abrasion-proof and longer use life.
The surface and the adjusting media of the valve shaft are nitrogenzed so that it is erosion and abrasion resistant.
Class≥1500,the middle cavity uses a self-tightening sealing structure to have the sealing performance reinforced along with the pressure rise so as to ensure the sealing performance.
There is no backward sealing structure in the valve, so the sealing is reliable.
The material of the filling and the flange size can be chosen and matched according to the applications and the requirements of the wier/s. That can satisfies all kinds of working requirements
Packaging & Delivery Of Cast Steel Flanged Gate Valves：
Molded flexible graphite is used for packing material. PTFE or combined packing material can be also used if being requested by the customer. The internal surface of the stuffing box, of which area is contacted with the packing, is of excellent finish(Ra 3.2µm). The stem surface, contacting with the packing, should be rolled and pressed after being precisely machined, so as to reach to the high finish and compactness (Ra 0.8µm) and ensure the reliable tightness of the stem area.
Usage/Applications Of Cast Steel Flanged Gate Valves:
These products are widely used in water source projects, urban water supply and drainage, sewage treatment, electric power, petroleum, petrochemical, heat supply, shipbuilding, medicine and metallurgy industries.
Valves are used for regulating or cutting off liquids in pipelines. Liquids available include water, sewage, sea water, air, foodstuff and oil.
- Q: Soft sealed gate valve and hard sealing gate valve which good?
- If the caliber, material and pressure levels are the same, the current market price is still soft sealed gate valve, about 20-30%.
- Q: Z45T-10 what kind of material is the gate valve?
- JB/T 308 regulation3.7.4 nominal pressure of less than 1.6Mpa gray cast iron valve body material code, in the type of preparation to be omitted.So its body material is gray cast iron, the sealing surface is copper alloy
- Q: What are the features and uses of the gate valve?
- 1) advantages: sealing performance than the cut-off valve, the fluid resistance is small, open and close more effort, full sealing surface by the erosion of media, media flows from the restrictions, with double flow, small structure length, wide application range. 2) disadvantages: high size, open need a certain space, opening and closing time is long, in the opening and closing, the sealing surface is easy to erode and scratch, and the two sealing pairs bring difficulties to the processing and maintenance.3) use: gate valve is generally used in the caliber of DN15-1800mm pipes and equipment, and its dosage is great, mainly cutting off function, not allowed to throttle.
- Q: Z41T one 10 gate valve and Z44T one, 10 gate valve difference
- Z41T one, 10 is single gate, Z44T one, 10 is double gateAccording to the provisions of the JB/T 308-2004 valve type programming method:Z== gate valve4== connection: flange type1== structure: Rigid single gate4== structure: Rigid double gateT== sealing surface material: copper alloy10== pressure rating: 1.0MPa
- Q: What is gate well?
- Explanation:Valve wells also called valve wells, underground pipelines and underground pipelines (such as tap water, oil, natural gas pipeline valve etc.) in order to facilitate the opening and closing part of network operation or overhaul when needed, a pit is a similar small room (or well), the valve installation in the pit where, for regular inspection, cleaning and dredging pipeline, to prevent the blockage of the pipeline project. The pit is called a well. There are valves, wells must have valves, but there is not necessarily a valve valve wells.
- Q: What are the structural differences between parallel and wedge valves?
- The structure of globe valve and gate valve. What does this article introduce first?What is parallel gate valve?The sealing cover is parallel to the vertical center line, so the sealing surfaces of the valve body and the gate are parallel to each other. This gate valve is the most common double gate plate, in order to shut down, so that the valve and gate two sealing surface contact closely asked, often used in two ram double sided thrust wedge block. Thus, when the valve is closed, the double side thrust block is contacted with the bottom of the valve body and is gradually stressed.
- Q: What's the difference between a soft seal gate valve and a hard sealed gate valve?
- The difference is that the form of the gate seal surface is different.General gate valves are generally leaking, easy to rust and other phenomena. Soft sealing gate valve (elastic seat sealing gate valve), gate material for cast iron lining rubber, overcome the shortcomings of the general gate valve, such as poor sealing, elastic fatigue, easy to rust, etc.. Soft sealing gate valve is a new product of the traditional gate valve.
- Q: Gate valve z11h/y-16 what does that mean?
- Product Name: internal thread gate valveItem number: Z11HProduct specification: DN15-50Product pressure: 1.6MPa-2.5MPaMaterial: cast iron, cast steel, stainless steelInternal thread gate valve nominal pressure 2.5Mpa, applicable temperature range -20-232-350, applicable medium: water, oil, gas and certain corrosive liquid (W.O.G), thread type G.NPT.BSPT.BSP.DIN259/2999.
- Q: What are the differences between the gate valve and the cut-off valve?
- The operating principle is different. The stop valve is an upward stem type, and the handwheel rotates and rises with the stem. Valve is hand wheel rotation, stem upward movement. Flow is not the same, the gate valve requires full open, the cut-off valve is not the same. The gate valve has no inlet and outlet direction requirements, and the cut-off valve has the required inlet and outletAt the same time, usually with the cut-off valve instead of gate valve, but the valve can also be used instead of cut-off valve. Valve sealing performance better, but the size is generally not large, the size of the gate valve can be done great.The main difference between them lies in:1, different structure, gate valve structure is more complex than the height, larger size, from the appearance point of view than the cut-off gate valve is short and high, especially the gate height space needs a higher open bar, the selection in the installation space under the condition of limited attention to.2, sealing surface, valve in the opening and closing valve and the valve seat surface always contact and friction between the sealing surface, and thus easy to wear, especially in close off the valve when the valve before and after the great pressure, sealing surface wear is more serious. And the valve once the valve is in open condition, it's seat and disc sealing surface between, not in contact,
- Q: What are the types and product categories of knife gate valves?
- Knife gate valve drive mode:Manual, sprocket, electric, pneumatic, hydraulic, bevel gear, electronically controlled, hydraulic and pneumatic drive. Knife gate shape: bright rod, dark rod two kinds. Knife gate valve material: cast iron, cast steel, carbon steel, stainless steel, fluorine and so on. Knife gate valve seal: hard sealing, soft sealing, single-sided sealing, double sided sealing and other material seal.
1. Manufacturer Overview
| Location | Shanghai, China |
| Year Established | 1993 |
| Annual Output Value | Below US$1 Million |
| Main Markets | North America; East Europe; West Europe; East Asia; Mid East |
| Company Certifications | ISO9001:2008;CE;API-6D;OHSAS18001:2007 |
2. Manufacturer Certificates
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period |
3. Manufacturer Capability
| a) Trade Capacity | |
| Nearest Port | Shanghai |
| Export Percentage | 1% - 10% |
| No.of Employees in Trade Department | above 100 People |
| Language Spoken: | English; Chinese |
| b) Factory Information | |
| Factory Size: | 89,000 square meters |
| No. of Production Lines | Above 10 |
| Contract Manufacturing | OEM Service Offered; Design Service Offered |
| Product Price Range | High; Average |
Send your message to us
Cast Steel Flanged Gate Valves
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 20 Sets pc
- Supply Capability:
- To Order pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
