PVC hose for water suction
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- 1000PCS kg/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications
Transparent Spiral Pvc Suction Hose
To be light in weight, transparent with good cold or hot resistance.
Small bending radiusa
Transparent Spiral Pvc Suction Hose
1. Made of: new PVC materials High quality
2. Specification: 1/2" to 16" 12mm-400mm
3. Length: 20m/roll,30m/roll,50m/roll
4. Color:green,yellow,red,black,clear etc
5. Diameter thickness as per the customers'requirement
6. Good flexibility. No poison and no smell.
7. Reinforced rigid plastic wire screw inserted into the inner wall of flexible PVC hose.
8. To be light in weight with good resistance to the hard weather conditions and minus pressure, and small bending radius.
9. Excellent resistance to pressure, external impacts, chemical, gases, light acids and saline water.
10. Working Temperature: -5 centigrade degree to +65 centigrade degree.
11. Ideal subsititute for rubber hose, cement hose and metal hose in many areas.
12. Widely used for pumping and delivery fluids such as water ,oil and powder in agriculture, factory and construction , can fit to PVC pipe by PVC glue.
13. Especally ideal for ventilation and air conditioning system,industrial vacuum cleaner,and granulate conveying systems.
Specifications of PVC Suction Hose
Size (in) | I.D. (mm) | W.T. (mm) | W.P. (bar) | B.P. (bar) | Length (m) |
3/4 | 19 | 2.0 | 8 | 32 | 50 |
1 | 25 | 3.5 | 8 | 32 | 50 |
1-1/4 | 32 | 4.0 | 8 | 30 | 50 |
1-1/2 | 38 | 4.0 | 8 | 26 | 50 |
2 | 51 | 4.3 | 7 | 24 | 30 |
2-1/2 | 64 | 4.5 | 6 | 20 | 30 |
3 | 76 | 5.0 | 5 | 20 | 30 |
4 | 102 | 6.0 | 5 | 16 | 30 |
5 | 127 | 6.0 | 4 | 13 | 30 |
6 | 152 | 8.0 | 4 | 12 | 20 |
8 | 203 | 8.0 | 3 | 9 | 10 |
- Q:do i need to need to clean the gas tube on my ar-15?
- Not really! However, I do know some AR15 users who will put, something like 10 or 12 thousand rounds through an AR; and, then, they'll remove the gas tube (or gas tube and front sight assembly) and let it soak in a tray of powder solvent for a day, or two, before finally draining it and blowing it out with a can of compressed air from either a computer or auto parts store. (Only the lucky ones have compressors!) In the alternative you can — again only on rare occasions — use a can of non-chlorinated carburetor or brake cleaner in order to do the same thing. Just stick the long plastic tube that comes with one of these cans inside the gas tube and blast away! All this being said: It's only rarely necessary to clean an AR gas tube because, in a way, every time you fire an AR the gas tube, pretty much, cleans itself — OK!
- Q:Are plastic tubes resistant to abrasion?
- Yes, plastic tubes are generally resistant to abrasion.
- Q:How do plastic tubes compare to ceramic tubes in terms of weight?
- Plastic tubes are generally lighter than ceramic tubes.
- Q:I have a long flexible 1 plastic tube that is attached to itself forming a closed circuit and I'd like to add an electric blower to it to flow air continuously that will make a small ball go around continuously. I'd like to splice the blower into the 1 plastic tube but need to know where or how to exhaust the air to keep the air circuit moving continuously in one direction.
- The problem is not how to connect the blower, the problem is how to get the small ball to go through the blower (which you can't). What you have to do is to deflect part of the air in the tube to the blower input without allowing the ball to go that path. And then the blower pressurizes the air and injects it downstream of the pick off port. A high pressure low volume blower or pump might be best. That means a small pick off port and a small injection port.
- Q:It Says... 'A long lasting, chewable play tube, made from a special, safe and environmentally friendly vegetable parchment. More hygienic than plastic tubes, with porous structure allowing greater ventilation. Excellent for rats, chinchillas, guinea pigs and other furry pets. Dimensions approximately 9 long x 4 diameter'Help please
- If you go to that site, and check the classified ads, there are people with excellent wood for sale that is safe for your chin. One lady has apple wood that is fantastic and Pet Products By Nature has pretty much any other kind of wood you can think of. Pecan is a huge favorite here because it has thick bark and lots of chewing. If you want this for a hidey house, a PVC tube covered with fleece will last longer, is washable, and is a lot better investment. You can hang it with chains or drill holes in it and insert screws and washers to hold it in place. You can also see those on CnH with examples to look at if you want to build your own. There are very, very few things that I recommend for chins from pet stores. Two types of feed (Mazuri and Oxbow), one type of hay (Mazuri), and pine, aspen, or Carefresh Ultra. That's about it. Other than that, I don't believe the pet companies are at all interested in the safety of my chins. They just want my money.
- Q:Can plastic tubes be used for holding powders?
- Yes, plastic tubes can be used for holding powders.
- Q:Are plastic tubes resistant to staining from food dyes?
- Yes, plastic tubes are generally resistant to staining from food dyes.
- Q:What are the different wall thickness options for plastic tubes?
- The wall thickness options for plastic tubes can vary depending on the specific requirements and applications. Generally, plastic tubes can have a range of wall thicknesses, starting from thin-walled tubes with thicknesses as low as 0.5mm (0.02 inches) to thicker-walled tubes with thicknesses exceeding 10mm (0.4 inches). The choice of wall thickness depends on factors such as the intended use, structural integrity, pressure resistance, and cost considerations.
- Q:Can plastic tubes be used for industrial labeling?
- Yes, plastic tubes can be used for industrial labeling. They are commonly used for labeling in various industrial settings due to their durability, flexibility, and resistance to moisture, chemicals, and UV radiation. Plastic tubes provide a reliable and cost-effective solution for labeling products, equipment, and components in industrial environments.
- Q:Can plastic tubes be customized with logos or labels?
- Yes, plastic tubes can be customized with logos or labels. This can be done through various printing techniques such as screen printing, hot stamping, or digital printing, allowing businesses to add their brand identity or product information to the tubes for promotional or informational purposes.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
PVC hose for water suction
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- 1000PCS kg/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords