32922 Tapered Roller Bearigs Single Row Bearing

Ref Price:
Loading Port:
Shanghai
Payment Terms:
TT OR LC
Min Order Qty:
1000 pc
Supply Capability:
500000 pc/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Specificatioin of Taperder Roller Bearings:



The tapered roller bearing is to bear the combination of radial and axial load but mainly afford radial load. The loading capibility is determined by the raceway angle of outer  ring, the larger angle afford larger load. This kind of bearings can be  seperated and it can be divided into single-row and double-row tapered roller  bearings by the number of columns. The clearance for single-row tapered roller  bearing should be adjusted by the customers when installation. For the  double-row tapered roller bearings,the clearance has already set by the  manufacture before ex-factory. Tapered roller bearing has taper shaped inner  ring and outer ring raceway,and the roller elements arrange between them. All  projection lines from the surface of rollers meet at the same point on bearing  axis. This design makes tapered roller bearings particular suitable for combined  (axial and radial) loads.The axial loading capacity is determined by the  contacting angle α, the bigger angle for α, the larger axial loading capacity  is. Tapered roller bearing is usually a seperated bearing, that is,the inner  ring assembly including roller and cages, is seperated installed with the cup.



Taper roller bearings are mainly used for radial and axial joint load with radial load as main subject. Axial load capacity relies on raceway angle of outer ring: the bigger the angle is, the bigger the bearing capacity is. Outer ring can be separated and can be easily assembled. During installing and using process, axial clearance and radial clearance and radial clearance can be adjusted and pre-interference installation can be allowed. 


            


Product application:

In many applications tapered roller bearings are used in back-to-back pairs so that axial forces can be supported equally in either direction.


- car and vehicle wheel

- mining equipment

- moderate speed

- engine motors

- axle systems    

- construction

- agriculture

- reducers

- gear box



Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Dimension parameter of thrust tapered roller bearing.
Which size do you want, eldest brother? How do I make so much?GB/T: recommended national standards; GB: mandatory national standards4663: taper roller national standard codeThere is a missing release year later!It should be: GB/T 4663-1994
Q:What are the general uses of tapered roller bearings?
At the time of greater radial load and axial load
Q:There is a slot in the inner ring of tapered roller bearings, right? Is the roller in the slot?
There is a slot in the cone... The ball is placed in the slot
Q:What are the conditions for the normal and reverse loading of tapered roller bearings?
2. anti loaded (outer ring width relative end) horns contact ball bearing or tapered roller bearing pressure center distance is greater than two at the midpoint of the bearing span, known as anti loading, obviously, axial thermal expansion will increase the axial clearance of bearing. In addition, the structure of reverse loading is more complicated, and it is inconvenient to assemble, disassemble and adjust.Stiffness analysis of positive and negative when the transmission parts of cantilever installation, shaft reverse mounting stiffness ratio of forward shafting high, this is because the distance from the center of pressure bearing with large, maximum bending moment of the bearing force, deformation and axial deformation and are less formal.
Q:The installation of tapered roller bearings
1, for example, a shaft needs to be fitted with two such bearings at both ends. Can it be installed in the same direction?The force of the shaft is concerned. If the shaft is indeed subjected to one-way axial force, of course, it can be installed in the same direction. If it is subjected to biaxial axial force, it will not work
Q:Tapered roller bearing: Bearing expert why burned or locked
Shaft tolerance is relatively small and fine head, the inner shell inside and nose has obvious signs of friction. If there are traces of friction on one side or on both sides of the inner shell, there is an abnormal contact with the inner shell of the bearing and the friction of the inner shell of the bearing.2, the inner shell shell burning marks are not serious, roller black even deformation, generally is the inner shell or casing tolerance, Ambassador bearing gap smaller, and even negative tolerance caused by burning. Or in the maintenance of the bearing selection is not correct, you can use large clearance bearings.3, the shell burned seriously, the inner shell, roller are no obvious changes, you can observe whether the shell has traces of friction. There are traces of friction on the outside, and it can be considered that the tolerance between the bearing shell and the shaft is insufficient, which results in abnormal friction caused by the slipping of the housing. If there are traces of friction on one side or on both sides of the shell, there is an abnormal contact between the component relative to the bearing housing and the bearing housing, and the heat generated by friction will be burned out.
Q:Can tapered roller bearings be joined together with two single row tapered roller bearings instead of double row?The altar,
Not so simple, please consider the following: 1, clearance of double row bearings generally have clearance design, and no single, you need to set in the middle of every lap, with good clearance, clearance or big or small, or no clearance, you miserable;
Q:Reasons for the damage of tapered roller bearings used on motors - -
To LZ: 1 it is recommended that the radial force and the rated load of the bearing be compared to determine whether the radial force is too large (if there is axial force, it needs to be synthesized as equivalent load, and then compare.) In 2 section, you basically is the middle of the two row tapered bearing ring and then as a double row tapered to use (not in general, so natural clearance installed back to back) without gasket or nut to adjust, this is a very good idea.
Q:Why is the cage of tapered roller bearings loose?
It is loose, the outer frame of the bearing cone is removable, as long as it is easy to install and add lubricant. You can come up with the relevant standards, must belong to the bearing standard parts, as long as you meet the standard requirements of the bearing can be spread!
Q:How does the roller of tapered roller bearings fit in?
Tapered roller bearings are made up of outer rings, inner rings, rollers, and cages. The outer ring is a single body, and the inner ring, roller and cage are assembled together. They are called inner components. Tapered roller bearings belong to separable bearings, and when installed, the two components (inner and outer rings) can be fitted together.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range