25-160L Hollow blowing machine for PE&PP CY80
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 pc
- Supply Capability:
- 30 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Chenyu Packing is a professional company specializing in R & D, manufacturing, technical service and sales of beer and beverage packing machinery.
Among the products, RCGF series, CGF series, DCGF series bottle packing and QGF series barrel packing beverage production lines and QHS series beverage mixer are all designed and made on the base of importing the advanced technology from German, Italy and Japan and its technology keeps the same level as international.
Also the company provides technical consultation, factory planning, installing and adjusting technological train and other services.
25-160L Hollow blowing machine:
Usage:
The 25-160L drums, tool boxes and auto parts series consists of CYB80, CYB90, CYB100 and CY120 etc., which can be used for producing drums, tool boxes and hollow parts of all kinds. Materials of PE, PP, and ABS can be used. Maximum capacity of accumulator head can be 12L while volume of products can be 160L. Its control system adopts closed loop control imported from Europe and hydraulic system is pressure-flow double proportional control equipped with variable plunger pump to ensure fast and smooth operation of the machine and energy consumption of the hydraulic system can be reduced by 30% or above, saving considerable electricity.
Main Technical Parameters:
Specification |
| CY80 | CY90 | CY100 | CY120 |
Material |
| PE、PP… | PE、PP… | PE、PP… | PE、PP… |
Max.container capacity | L | 25 | 50 | 120 | 160 |
Number of die | set | 1 | 1 | 1 | 1 |
Output | pcs/hr | 500 | 400 | 360 | 300 |
Machine Dimension | m | 4.2×2.3×3.6 | 4.6×2.5×3.8 | 5.8×2.5×4.6 | 6.9×2.9×4.8 |
Total weight | ton | 12 | 13.8 | 18 | 20 |
Accumulator head?? |
| CY80 | CY90 | CY100 | CY120 |
Accumulator capacity | L | 5 | 6.6 | 12 | 18 |
Power of die heating | KW | 18 | 22 | 26 | 38 |
Number of heating zone | zone | 4 | 4 | 4 | 5 |
Die diameter | mm | 300 | 350 | 450 | 510 |
Injection pressure | Mpa | 8 | 8 | 8 | 8 |
Max.injection speed | Kg/sec | 1.5 | 1.5 | 1.5 | 1.5 |
Clamping Unit |
| CY80 | CY90 | CY100 | CY120 |
Clamping force | KN | 210 | 350 | 500 | 720 |
platen opening stroke | mm | 250-700 | 400-1000 | 500-1400 | 600-1400 |
platen size | mm | 740×600 | 880×780 | 1020×1060 | 1100×120 |
Max mould size | mm | 560×630 | 700×960 | 800×1260 | 900×1400 |
Mould thickness | mm | 250-350 | 455-510 | 360-700 | 450-750 |
Extruder Unit |
| CY80 | CY90 | CY100 | CY120 |
Screw diameter | mm | 80 | 90 | 100 | 120 |
Screw L/D ratio | L/D | 25:1 | 30:1 | 30:1 | 30:1 |
Extruding Volume | Kg/hr | 100-120 | 120-200 | 180-270 | 200-320 |
Screw rotation rate | r/min | 10-86 | 10-86 | 10-86 | 10-86 |
Extruder heating power | KW | 20.2 | 21.6 | 26 | 32 |
Extruder driving power | KW | 30 | 37 | 45 | 45 |
Power consumption |
| CY80 | CY90 | CY100 | CY120 |
Driving power | KW | 52 | 76 | 89 | 130 |
Heating power | KW | 36 | 44 | 60 | 78 |
- Q: Hello, I just do packaging machinery, foreign trade, I do not know how to search customers ah.For example, our products have machines that can pack candy and cookies. Do you want to search for candy or biscuit manufacturers and then recommend them to our products? These candy manufacturers search through the Internet to recommend, the effect is good?
- If you are the original producers, can consider to do the initial stage through the middle of the exporter, first ensure that factory production product quality clearance, production procedures and quality control documents pass, in order to gradually establish its own customer base.
- Q: What are the main plastic forming processes?
- 3. cold pressing molding. Cold pressing molding is also called cold pressing sintering molding. The difference between the cold press molding and the ordinary compression molding is that the material is pressurized and molded at room temperature. The mold after release can be heated or cured by chemical action. This method is used in the forming of polytetrafluoroethylene and some high temperature resistant plastics (such as polyimide, etc.). The general process is three steps of billet sintering cooling.4. transfer molding. Transfer molding is a molding process for thermosetting plastics. When molding, the mold is heated and softened in the heating chamber and then pressed into the mold cavity where it has been heated. According to the different types of transfer molding equipment form: trap type; the tank; the piston.The requirement of plastic molding for transfer molding is that the plastic should have a greater fluidity before reaching the curing temperature, and the curing rate must be faster at the curing temperature. Phenol, melamine, formaldehyde and epoxy resins can meet this requirement.Transfer molding has the following advantages: less waste edge products, can reduce the processing quantity; second molding with fine or brittle insert and perforation of the products, and can keep the insert and the hole position is correct; the product performance is uniform, accurate size, high quality; the mould wear small. The disadvantage is that the manufacturing cost is high compression mold die; the plastic loss; the fiber reinforced plastics for fiber orientation and anisotropy; and around the insert around the plastic, sometimes due to melting is not strong and make the products according to the strength reduction.
- Q: Packaging machine knife cut out of the mouth is uneven, always inclined, so adjust, now tune not come back, or is unable to cut off, or die!
- Change a new one, in fact, the knife is very simple, and the ordinary knife is very cheap.If you don't understand, you can ask me
- Q: What are the main functions of packaging machinery and equipment?
- Packaging machinery can be realized in the packaging process, including filling and wrapping,
- Q: Working principle of packing machine
- Then, by heating the sealing part of the bag bottom sealing, again is material, the material into the packaging machine, and then sealing, finally cut off, a complete package came out, this is the working principle of small vertical packaging machine.
- Q: What is the name of the paper used in packing machine parts and yellow?
- Vapor phase rust proof paper is coated with vapor phase corrosion inhibitor on the base of antirust base paper (surface like kraft paper, but with chloride ion and sulfate ion limit requirement)
- Q: How is the production and characteristics of ceramic wall tiles different from the size and performance of molding?
- What is the production process of ceramic wall and floor tiles? What are the characteristics of the powders produced by spray drying?The tiles and other ceramic raw materials is similar to inorganic non-metallic materials (mainly silicate) as the main raw material, through accurate mixing processing, according to certain technology and shape the final firing. Significant features of the product shape are the rule of Fu Banzhuang, and most of the semi dry pressing method, and therefore suitable for automatic production line of raw materials 4 ingredients of crude, water, 4 fine granulation molding - burning glaze, glaze firing and assembly of I (paving) pick - packagingThere are different granulation methods in different production processes. The former is to dehydrate the mud and then dip it into the mud or directly with mud cake. The equipment has small investment, easy installation, operation and maintenance, irregular particle shape, uneven thickness and poor flowability. The I drying tower of the spray drying machine directly prepared the slurry into powder, which has high powder making efficiency and good powder flowability, and is the most ideal automatic powder powder making system at present. When the powder made from spray drying tower is pressed to wall and floor tile, the billet handle can be increased by about 30%.
- Q: What is the delay time of the packer's cross sealing?
- You can debug it yourself, set up a parameter, such as a delay of 1 second or a few seconds, look at the action of sealing, you know what time it is.
- Q: What is the working principle of the pillow packing machine?
- Some packaging machinery manufacturers, many varieties of products, in the purchase of packaging machines, I hope a device can pack all their own varieties
- Q: What does that mean when the composite material is pressed and molded? What are pressing forming? What are the characteristics of press molding equipment? Its development
- Can be used to shape complex products. The principle is similar to that of injection molding. One is used for thermosetting, heating and cooling in molds, one for thermoplastic, and the other for heating in the barrel and molding cooling in the mold.
Send your message to us
25-160L Hollow blowing machine for PE&PP CY80
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 pc
- Supply Capability:
- 30 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
