2-16L Hollow blowing machine for PE&PP CY-10L
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 pc
- Supply Capability:
- 30 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Chenyu Packing is a professional company specializing in R & D, manufacturing, technical service and sales of beer and beverage packing machinery.
Among the products, RCGF series, CGF series, DCGF series bottle packing and QGF series barrel packing beverage production lines and QHS series beverage mixer are all designed and made on the base of importing the advanced technology from German, Italy and Japan and its technology keeps the same level as international.
Also the company provides technical consultation, factory planning, installing and adjusting technological train and other services.
2-16L Hollow blowing machine:
Usage:
The 2L-16L double station blow molding machine is equipped with high-precision linear guide, covering four major series of CY-2L, CY-5L, CY-10L and CY-16L. It can be used to produce a wide variety of materials, such as PE, PP, and PA. The largest size of container can be 16L, in accordance with different type of products, die heads can be changed to achieve multi-type production.
Main Technical Parameters:
Specification |
| CY-2L | CY-5L | CY-10L | CY-16L |
Material |
| PE、PP… | PE、PP… | PE、PP… | PE、PP… |
Max.container capacity | L | 2 | 5 | 10 | 16 |
Number of die | set | 1、2、3、4 | 1、2、3、4 | 1、2、3、4 | 1、2、3、4 |
Output | pcs/hr | 950×2 | 750×2 | 700×2 | 600×2 |
Machine Dimension | m | 2.7×2.0×2.5 | 3.4×2.2×2.6 | 3.9×2.3×3 | 4.9×4×3.1 |
Total weight | ton | 4 | 6.5 | 9.5 | 10 |
Accumulator head?? |
| CY-2L | CY-5L | CY-10L | CY-16L |
Number of die heating | zone | 3 | 3 | 3 | 4 |
Power of die heating | KW | 4.2 | 5.8 | 6-7 | 6-7 |
Max die-pin diameter | mm | 60 | 80 | 140 | 140 |
Center distance of twin-die | mm | 130 | 160 | 240 | 260 |
Center distance of tri-die | mm | 85 | 110 | 160 | 180 |
Center distance of four-die | mm | 65 | 85 | 120 | 130 |
Clamping Unit |
| CY-2L | CY-5L | CY-10L | CY-16L |
Clamping force | KN | 38 | 70 | 110 | 155 |
platen opening stroke | mm | 135-370 | 145-510 | 230-600 | 230-600 |
platen size | mm | 280×380 | 320×390 | 450×490 | 500×490 |
Max mould size | mm | 300×320 | 350×370 | 520×500 | 600×500 |
Mould thickness | mm | 135-210 | 155-300 | 235-380 | 235-380 |
Extruder Unit |
| CY-2L | CY-5L | CY-10L | CY-16L |
Screw diameter | mm | 60 | 70 | 90 | 90 |
Screw L/D ratio | L/D | 24:1 | 24:1 | 25:1 | 25:1 |
Extruding Volume | Kg/hr | 60-80 | 100-120 | 130-160 | 130-160 |
Number of heating zone | zone | 3 | 3 | 4 | 4 |
Extruder heating power | KW | 5-6.6 | 6-8.2 | 8.2-9.3 | 8.2-9.3 |
Extruder driving power | KW | 15-18.5 | 22-37 | 37-45 | 37-45 |
- Q:What are the main functions of packaging machinery?
- In order to meet the requirements of many customers, our company has learned from all aspects of the role of packaging machinery and equipment, so that we need customers for reference
- Q:Will the Internet be too passive? Telephone marketing, what kind of food can be found in the factory, such as the phone, people basically do not need, and all have. Does the salesman run the market? How do you run? Thanks for the direction...
- (especially the telephone communication, stop talking no worries) I think you should understand the specific situation, your target customers first, for example: mechanical models currently in use and the time of purchase, production efficiency, what will be improved after the replacement, can recover the cost of even a few years, these are all what you should do in advance homework.
- Q:What are the main plastic forming processes?
- 3. cold pressing molding. Cold pressing molding is also called cold pressing sintering molding. The difference between the cold press molding and the ordinary compression molding is that the material is pressurized and molded at room temperature. The mold after release can be heated or cured by chemical action. This method is used in the forming of polytetrafluoroethylene and some high temperature resistant plastics (such as polyimide, etc.). The general process is three steps of billet sintering cooling.4. transfer molding. Transfer molding is a molding process for thermosetting plastics. When molding, the mold is heated and softened in the heating chamber and then pressed into the mold cavity where it has been heated. According to the different types of transfer molding equipment form: trap type; the tank; the piston.The requirement of plastic molding for transfer molding is that the plastic should have a greater fluidity before reaching the curing temperature, and the curing rate must be faster at the curing temperature. Phenol, melamine, formaldehyde and epoxy resins can meet this requirement.Transfer molding has the following advantages: less waste edge products, can reduce the processing quantity; second molding with fine or brittle insert and perforation of the products, and can keep the insert and the hole position is correct; the product performance is uniform, accurate size, high quality; the mould wear small. The disadvantage is that the manufacturing cost is high compression mold die; the plastic loss; the fiber reinforced plastics for fiber orientation and anisotropy; and around the insert around the plastic, sometimes due to melting is not strong and make the products according to the strength reduction.
- Q:What are the packaging machines that use temperature control watches?
- A lot of heating machines have to use thermostat
- Q:What kind of reducer is commonly used in packaging machinery?
- There are many kinds of packing equipment, such as food packing, filling, quantitative packing, back channel packing and so on
- Q:Whether you can press paper plastic molding after PET
- Sure;Note cards must be coated with plastic oil;But to use the hot pressing machine there is to do bakelite mold. Our company specializing in the production of blister, in addition to help customers hot packaging, directly to the finished products to customers
- Q:A & B two sets of packaging machines, at the same time packaging quality of 500 kilograms of goods
- (1) calculate the average of two samples;(2) the variance of two samples was calculated;(3) which packaging machine is more stable in packing quality?(1) according to the average, the number divided by the sum of each group;
- Q:Food packaging process is not standardized, there is no responsibility?! For example, after the production of candy, because there is no corresponding packaging equipment, the need for artificial packaging
- Yes, automatic packing machine. I'm an employee of the automatic packaging machinery company.
- Q:Vacuum packing machine for cooked food: can whole chicken, whole goose and whole duck be packed?
- Buddy, you go to Taobao to buy a few hundred vacuum packaging machine, the 3 days is no problem, I suggest you go to buy a good brand, this thing hundreds of, garbage is easy to bad, shelf life 3 days, basically no problem
- Q:Working principle of packing machine
- In the first step, the wrapping paper is pulled down by a bag pulling motor, and then the paper part is supplied with paper according to the signal of the paper feeding sensor, and the wrapping paper is formed through the forming part of the shaper
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
2-16L Hollow blowing machine for PE&PP CY-10L
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 pc
- Supply Capability:
- 30 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords