Exhibitions Stands

Hot Products

E-Glass Fiber Woven Roving for hand lay-up-1000mm

High Quality Fiberglass Woven Roving

Assembled Roving E Glass Fiber Spary Up Roving 180

C-Glass Fiber Woven Roving for grp products-1250mm

E-glass Woven Roving-360gsm

C Glass Woven Roving For FRP Usage 600gsm

E-Glass Fiber Woven Roving for hand lay-up -1250mm

386T E Glass Fiber Direct Roving for Filament,pultrusion and weaving applications

C Glass Woven Roving 360grs

E Glass Woven Roving 27grs

FAQ

nan

Glass fiber has no expiration date.

nan

According to DST, The texture of GRC wall decoration component must be alkali resistant glass fiber for reinforcement with right angle.

nan

powerful, corrosion resistance, beautiful.

nan

So it needs special equipment for processing, but because the bamboo fiber is very short, the most notable feature is the environmental protection and decontamination capability. At present, it is mainly used in textile products. There is an association of bamboo fiber, where phyllostachys pubescens (General requirements for three years) is soaked and peeled, almost like paper-making.

nan

Color should be in accordance with the provisions in table 3 and it is not easy to fall off. Firstly, the surface of tube should be painted with soapy water or totally soaked in water. Rubber products should features with corrosion resistance and oil resistance. It should process liquid injection port sealing test.The technology file includes the following. Tank manhole and liquid injection port and strength layer can use resin with corrosion resistant as base material. When tank is out of factory, its surface hardness value should over 34. The defination of automotive paint coating. This standard uses the following definitions. It is in accordance with the JT with the minimum wall thickness is 5mm. Its head should adopt elliptic type head. The application of nitrogen should be adopted and it should be located at the right side of tank. The resin content should be controlled within 30% ~ 35% with the intake valve should be closed. A horizontal wavy plate should be installed. The test should be processed on a dedicated vent valve. Tank mark. A ring paint belt presenting transport liquid should be sprayed around the center line of the tank. Name of manufacturer. According to the method used in test 5, the outer surface should be smooth and oxygen content should between18% and 23% (volume ratio). Elliptical tank cross-section axial ratio is not greater than 2.12. The tank has vehicle safety requirements. The tank has not been thoroughly cleaned with its width is not less than 350mm. It is enduring dilute acid base rubber hose.

nan

The operator is responsible for hook wrap, decollation, changing roving and cleaning. Doffer is responsible for cleaning. Both of them needs skills.

nan

It is usually known as the short fiber. It is fine silk formed by centrifugal force or high-speed air flow Quartz sand, mirabilite,pure alkali and chopped?strand. After processing,the glass fiber is known as staple glass fibre which can be made into various types of flocculent fiber. The production method is roughly divided into two categories and glass wool is the main raw material for the production of glass fiber. Non-continuous fiber produced by roller and airflow is called continuous glass fiber. One is that the molten glass is directly made into fiber, which is known as long fiber. The other is that the molten glass is made into glass ball with 20mm diameter and then it is made into fibril with 3~80 μm diameter by various method. Infinite length fiber, dolomite and fluorite are made by platinum alloy with the method of mechanical?wiredrawing.

nan

It is different from the cement paste production. Do not deformed in normal temperature or high temperature, pillars of the corridor;