C Glass Woven Roving For FRP Usage 600gsm
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 16000kg kg
- Supply Capability:
- 160000kg Per Month kg/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Brief Description
1. C glass roving 600gsm are bidirectional fabric made by direct rovings in plain weave pattern.
2. Compatible with unsaturated polyester,vinylresin ,epoxy resin.
3. Applicable for hand lay-up, winding and compress molding process,Suitable for manufacturing tank,boat,automobile parts and other FRP products.
Characteristics
1.Consistent thickness and excellent surface treatment.
2. Rapid impregnating and good compatibility with resin.
3.Uniform tension,high dimensional stability and making handing easy.
4.Good mechanical properties and high strength of parts.
Technical Date Sheet
TEST ITEM | STANDARD | STANDARD VALUE | AVERAGE VALUE | RESULT | ||
AREA WEIGHT (G/M2) | GB/T 9914.3-2001 | 600+/-48 | 606 | yes | ||
COEFFICIENT OF AREA WEIGHT VARIATION (%) | GB/T 9914.3-2001 | ≤6 | 2.35 | yes | ||
WIDTH (MM) | GB/T 4669-1995 | 1000±20MM | 1000 | YES | ||
FABRICS COUNT (ENDS/10CM) | WARP | GB/T 7689.2-2001 | 25±2.5 | 26 | yes | |
WEFT | GB/T 7689.2-2001 | 25±2.5 | 24 | YES | ||
TENSILE STRENGTH(N/50CM) | WARP | GB/T 7689.5-2001 | ≥2750 | 3540 | yes | |
WEFT | GB/T 7689.5-2001 | ≥2650 | 3556 | YES | ||
moisture CONTENT (%) | GB/T 9914.1-2001 | <=0.30 | 0.25 | yes | ||
LOSS ON IGNITION (%) | GB/T 9914.2-2001 | 0.4-0.8 | 0.75 | yes | ||
FAQ
1.Package
Eech roll is packed by polyester bag,and then put into a cardboard box or plastic wowen bag.The weight of each roll is between 20 to 85 Kg, The rolls are to be horizontally placed and could be in bulk or on pallet.
2.Storage
Optimum storage conditions are between the temperature of 5～35℃ and with the humidity between 35%～65%.The product should be used within 12 months from the time of delivery and remain in theiroriginal packaging until just prior to use.
- Q:The difference between EPS and GRC, advantages and disadvantages, construction technology, key points, the scope of application.
- Fissure is easy to leak water in the cold temperature. Flat connector does not absorb water with a little amount of coating and short production cycle (about 7-12 days). GRC decorative elements is heavy. Due to its shorter installation, it does not require very specialized workers. There is no problem under the temperature of plus or minus 50 degrees Celsius. It has excellent waterproof performance. It has pore and is not easy to chap, but it is easy to deal with and carry with good toughness. If you want to refit it, you need to do some waterproofing work. The connector can absorb water and the material used for producing is belongs to stiffness material with less crack. Finished products features with lightweight, crisp, poor uniformity. High-level job is difficult to process without leakage. Cracking phenomenon is serious and can be cut. Hot bridge is different to control with protective layer features with weathering resistance. Its weight account for 10% of the traditional non light components. Large deformation period is slow. It can be bended moderately. It features with freezing and?thawing resistance and little deformation. It is easy to install and crack so that it needs to be trimmed. It is easy to be linear deformation.
- Q:Who is going to handle the comonent joint of GRC in the exterior wall?
- Both of them should be tested. The installation process will handle it in surface flat, the rest of the process will continue.
- Q:What is glass fiber for?
- It is an excellent inorganic non-metallic materials with good insulation, good corrosion resistance and poor abrasion resistance. It have a great variety and produced by high temperature melting with glass ball or waste glass. It has high mechanical strength and can be used as electrical insulating materials and heat or thermal insulation. Each bundle fibers is formed by hundreds or even thousands of filaments with its diameter is from several microns to over twenty micron.
- Q:Is arbon fiber better than glass fiber reinforced plastic
- Lighter and more toughness.
- Q:What materials are used to the special grid plate of the carwash?
- We call it geogrids with the frame made by the glass fiber twistless roving. The matrix is mainly unsaturated polyester resin
- Q:The manufacturing technique and process of glass fiber
- What is the thickness of chemical industry glass fiber winding pipe and chemical industry standard deviation?
- Q:What is the difference between the glass and glass?reinforced?plastics?
- Glass fiber reinforced plastics is also known as glass fibre reinforced plastics which is a kind of composite material. It is formed by compositing glass fiber cloth with resin. Production of glass and glass fiber needs soda. Glass fiber, just as its name implies, is a kind of glass which has become filament.
- Q:A chromic acid concentration and what kind of glass?reinforced?plastics should be used in chromic acid waste gas purification and recovery device.
- Rated condition is 2. * filtering grid should be cleaned regularly according to the degree of pollution. * according to different air volume. There are two types including vertical network format and horizontal network format. * Airflow direction of horizontal recycle collector is from right into the left, and chromic acid waste gas purification recoverer is mainly used for recycling and purifying chromic acid waste gas from electroplate chromate tank belt. * the bottom must be maintained at a level of 5 meters. *Face velocity passed through recoverer filter net must be maintained at 2 to 3 meters per second so that chromic acid can be expelled from bottom hole with efficency is over 90% and chromic acid liquid is recycled. * All air duct system before the recoverer is made from plastic plate. The chromic acid can be directly poured into the plating bath with the airflow direction cannot be reversed. The airflow direction of vertical collector is from bottom to top and it should be used together with BF4-72 type centrifugal ventilation machine. It can be cleaned once a month.
- Q:What are the advantages of glass fiber reinforced plastic antennas? What's the difference between an ordinary antenna and an ordinary one?
- SMC and its molded products as a new glass fibre reinforced plastics, glass steel, the processing methods can be divided into: hand molding, injection molding, paste pultrusion, winding molding, resin transfer molding, molding and other kinds of processing methods.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
C Glass Woven Roving For FRP Usage 600gsm
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 16000kg kg
- Supply Capability:
- 160000kg Per Month kg/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
