Q:How about semi-automatic edge board running?

What brand? Generally, the running plate can be changed by straightening the guide rail

Q:Always appear overflow glue, adhesive not fatigue phenomenon, there is no good way, seek advice...

There are several analyses:1, too much glue, so it will overflow, usually 1mm thickness enough.2. sticky, it may be the temperature is not sure. Try more than one trial.3., there is probably one of the largest, the quality of glue is too bad.

Q:I recently want to decorate, take advantage of E0 class environmental protection solid wood paint free board, want to buy this kind of board, let people make cabinets, consult, buy back this kind of board, general carpentry master will do, need special equipment? Still need to make a special cabinet where the production? Especially the edge of this kind of plate, what kind of process is needed?

Solid wood paint free edge, you can use the same color of plastic strips or solid wood lines brush paint to close the edge, these two are the most common way to edge. Plastic strip edge convenient and simple process, but because of the use of wood and glue bonding, so the probability of loss is very large; the use of wood folding edge, the price is too expensive, complex process, the construction workers demanding, but very practical, but also very durable.The construction of plastic strips has little demand for the workers. As long as they are careful, they are required; but the solid wood line requires a higher level for the workers. They must be careful in painting and fixing the lines.Specific to see what they like, practical edge to pick up, it is recommended to use solid wood lines, the best edge, but should pay attention to good paint palette.

Q:Do you have an edge seal for each contract?

For original truth

Q:Is there any good sealing method for paint free door?

Lacquer free. Edge banding boards have many colors and are not easy to break

Q:How to install stainless steel edge banding?

With a bender processing, and then put on glass glue button on it

Q:I would like to ask, do furniture, what is the furniture full edge?

1, refers to the furniture edge banding process, each edge should be completed by hand edge;2, there are two kinds of edge banding:The wooden edge banding strip is mainly suitable for pasting and decorating the edges of the solid wood furniture plate, and the operation can only be accomplished by hand pasting. Paste wood edge adhesive is a water-soluble adhesive or strong adhesive paste, as long as the edge of the plate profile is flat on the line, there is no specific requirements in the environmental temperature.PVC edge banding strip can be divided into flat PVC edge banding strip and special-shaped edge banding strip according to its shape. Flat edge banding is mainly used in furniture, kitchenware, teaching equipment, laboratory, door industry, decoration and other industries. Mainly used for particleboard and MDF section sealed, to prevent the closing, decoration, the plate itself containing harmful gas volatilization, prevent moisture in adverse factors such as damage etc..3, man-made board made of furniture did not do all edge treatment, do not buy. Those who made use of wood-based panel furniture parts processing on the edge is very strict restrictions, especially the use of particleboard made furniture should be asked all the edge, so as to limit the harmful substances in artificial board release, but many manufacturers in order to save materials, only the local edge, so best not to buy furniture.

Q:At home, the carpenter said that the glue on the sticky edge was glued with glass and that it was quick drying. I wonder if, but if so, where can I buy this glue?

Sure, my original company is doing edge banding sold to cabinet manufacturers!

Q:12 mm sunshine board with what specifications of edge banding?

The sun in color: transparent / Blue / Green / White / Brown / Blue routine specifications: 2.1m (W) * 6m (length), thickness: 6.0mm, 8.0mm, 10.0mm three layer: thickness: 12.0mm, 14.0mm, 16.0mm, 18.0mm panel color: transparent / Blue / Green / White / Brown / Blue General specifications: 1.22/1.56/1.82/2.1M (width) *30M (length), thickness: 1.0-15.0MM such as a large quantity, color and specifications can be customized according to requirements of aluminum strip is mainly used for fixed joints between PC plates, screws, with waterproof tape and EPDM tape to the water leakage effect, effective and beautiful appearance, long service life, no corrosion of the plate. Mainly used for closing sun plate sealing ends, prevent dust, rain, worms into the hole, material life and beauty!

Q:The more detailed the better, as long as the edge and veneer veneer detailed steps, other steps do not use.

1. edge:The manual or automatic edge banding machine edge, can also manually edge, no matter what kind of program are: edge, edge or edge glue - edgeband pressure post in edge - edge - on both sides of the extra redundant block edge trimming - dressing for automatic sealing machine, milling, and tracking trimming, scraping, polishing and other functions.The edge is the key to the edge of the plate must be straight, not push table saw blade size dislocation generated by the steps, to pressure post close, otherwise prone to edge and edge cracks, hand edge special glue best edge by hand, do not recommend the use of adhesive, heat is easy to fall off.2. veneer veneer:Plate thick sanding - selection of veneer veneer veneer cutting - seam - Sheet glue - coating adhesive on the veneer sheet surface into the hot pressing - trimming or trimmingSeveral key points of veneer veneer:The surface must be flat, and there must be no ribs, depressions, holes and so on, otherwise it is easy to bubbling and separating;Veneer cutting cut straight seam tight, otherwise prone to crack;Coating should be appropriate, even, too much glue, easy to penetrate, glue too little, easy to lack glue, bubble, separation;The temperature and time of pressing should be mastered accurately.