Hydroxypropyl Methyl Cellulose (HPMC) for ETICS/EIFS
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Hydroxypropyl Methyl Cellulose (HPMC) is non-ionic cellulose ether, made by natural high polymer cellulose as raw material and series of chemical processing. They provide water retention and cohesiveness to mixtures. With special modification, it can be used to control thickening, water demand, workability, sag resistance, strength and other important properties of the final product.
It is widely used as thickener, adhesive, water preserving agent, film-foaming agent in building materials, industrial coatings, synthetic resin, ceramic industry, medicine, food, textile, agricultural, cosmetic and other industries.
Physical and chemical index：
CAS: 9004-65-3 | INDEX | ||
60SS-E | 65SS-F | 75SS-K | |
Hydroxypropyl % | 7.0-12.0 | 4.0-7.5 | 4.0-12.0 |
Methoxyl % | 28.0-32.0 | 27.0-32.0 | 19.0-24.0 |
Gel temperature ℃ | 58-64 | 62-68 | 70-90 |
Moisture % | ≤5.0 | ||
Ash content % | ≤1.0 | ||
Viscosity mpa.s | 100-200000 | ||
≥70 | |||
Whiteness % | ≥75 | ||
Bulk density g /l | 370---420 | ||
Appearance | white or off-white fibrous or granular powder, odorless, tasteless | ||
Package:
25kg/package. Use polyethylene film cardboard or plastic polypropylene woven bag package.
ETICS/EIFS
To save cost of heating or cooling power, ETICS (EIFS) (External Thermal Insulation Composite System / Exterior Insulation Finish System) is used to apply thermal insulating material and reinforcing mesh to the exterior of buildings.
HPMC is used in this application as a functional additive to improve adhesion strength, workability and pot life. Also it helps to delay drying out of the mortar surfae.
Recommend grades: HPMC 75SS-K (100000mpa.s)
- Q:If it isn‘t then what property is it?
- It's an example of the additive inverse. -12 is the additive inverse of 0. 0 is the additive identity element, just as 1 is the multiplicative identity element. The inverse is the number (for the specific operation) that yields the identity element.
- Q:Food additives in lollipop (caramel, phospholipid (soy lecithin) is harmful to people?
- If it is caramel pigments and phospholipids, then the human body is harmless, caramel pigments have the role of promoting digestion, phospholipids are also beneficial to the human body.
- Q:How so? :o)
- I was full of preservatives, not so much anymore, not by choice but because of the way they make things now! Long gone are the days when you eat fish and chips on real newspaper! Sweets don't taste like they did when I was little because they have taken all the e numbers out! If you ate gooseberries of blackberries from the bush now people would think you were mad! Although I do wonder if we are getting more additives from the plastic they wrap veggies in! I don't get that really veggies come with their own protective coating, why add wrappers! Are you full of artificial preservatives or natural?
- Q:I have a 2005 Jaguar S Type 3.0 6 cyl. and need PS additive to take out the squeak and I can not find it anywhere online!I DO NOT live anywhere near an auto parts store and MUST order this online.Thx!
- You may be looking for the wrong thing. A power steering pump that has fluid in it should not squeak. Try something called Belt Dressing, or simply tighten the belt some.
- Q:What roles do food additives play in the colour and flavour of food and in the preservation of some food items?
- Additives in food can increase the nutrition value e.g. added fiber, Vitamin C, Vitamin D etc. Obviously additives are used to preserve foods making them last longer and also to change or enhance the color of foods. I've heard that some supermarkets use additives to keep the outside of fresh meat looking red or pink so it looks fresh longer than it should.
- Q:find a number which is nine less than twice the additive inverse?
- Let's call the number x. The additive inverse is by definition, -x (because x + -x 0). This leads us to the following equation: x + 9 -2x which will give us x -3.
- Q:So Theoretically, both the Additive (RGB) and Subtractive (CMYK) color processes should be equal, but what is the primary limitation of the additive process in color reproduction?
- Goodyear triple tread. Love them.
- Q:are $9.00 and a bunch in between . How can anyone know which is best? What is the difference?
- Three of the better ones are: BG 44K, Sea Foam, and Chevron Teck Ron. Teck Ron can be purchased 4 bottles in a pack for $10.00 from Costco.
- Q:Is there such an additive to clean engine to put out the engine check light
- There are many reasons the check engine light might come on. You could disconnect the battery for a few minutes, that will usually temporarily shut the light off, but chances are it will come back as the computer has detected a fault. The check engine light is mainly for emissions purposes, although if it is flashing, that means more serious engine conditions. That being said, if you reset the light and it comes back, but the vehicle is otherwise operating properly, I would just put a sticker over the light and call it good if you don't want to spend the money to have it looked at. Your fuel economy and emmisions are likely not going to be where they should be. You are wasting your time and money with fuel or oil additives. Oil and fuel manufacturers go to great lengths to put additives and detergents in their products, and you are not going to make them any better with additives.
- Q:I have heard I do and I have heard I don‘t. If so by running a tank of gas through it without additive would that of hurt anything?
- High performance cars from the 60's and early 70's require high performance gasoline. Unless the engine has already been modified, pre-1971 cars require leaded high octane gasoline to run correctly. Because leaded gasoline is no longer sold in the United States, owners of these types of vehicles need to buy lead substitute additives (around $2-$5 per bottle). A bottle is generally good for one tank of gas. Lead is critical because it acts as a lubricant for the internal engine parts and stops them from wearing out prematurely. Engines built in 1971 and later are built to run on unleaded gas so adding lead substitute is not needed. In fact, lead damages Catalytic Converters, which are required on cars built after 1977, and is more harmful to the environment. Adding a lead additive to a pre-1971 engine will literally prevent the engine from beating itself to death
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Hydroxypropyl Methyl Cellulose (HPMC) for ETICS/EIFS
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
