Polycarboxylate Superplasticizer in High Performance from CNBM

Ref Price:
Loading Port:
China main port
Payment Terms:
TT OR LC
Min Order Qty:
1000 m.t.
Supply Capability:
50000 m.t./month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Instructions for use

 

1、聚羧酸系减水剂的掺量为胶凝材料总重量的0.3%1.0%,常用掺量为0.8%2.0%。使用前应进行混凝土试配试验,以求最佳掺量。

The admixture of

1, polycarboxylate superplasticizer is the total weight of cementitious materials from 0.3% to 1%, the common content is 0.8% ~ 2%. Use should be carried out before the concrete test, in order to achieve the best dosage.

、使用聚羧酸系减水剂时,可以直接以原液形式掺加,也可以配制成一定浓度的溶液使用。

2, use polycarboxylates water reducing agent, can be directly added to liquid form, also can be made into a certain concentration of solution.

、由于掺用聚羧酸系减水剂混凝土的减水率较大,因此坍落度对用水量的敏感性较高,使用时必须严格控制用水量。

3, because the mixed with polycarboxylates superplasticizer concrete decrease water rate is larger, therefore slump for water sensitivity high, when using water must be strictly controlled.

、聚羧酸系减水剂可适应性很高,但对个别水泥有可能出现减水率偏低,坍落度损失偏大的现象。另外,水泥的细度和储存时间也可能会影响聚羧酸系减水剂的使用效果。此时,建议通过适当增大掺量或复配其它缓凝组分等方法予以解决。

4, polycarboxylate superplasticizer can be high adaptability, but to individual cement appear likely decrease water rate is low, the slump loss of large phenomenon. In addition, the fineness of cement and storage time may also affect of polycarboxylate based superplasticizer using effect. At this time, suggested by properly increasing the dosage or blends with other retarding components methods to solve.

 

Polycarboxylate Superplasticizer in High Performance from CNBM

Polycarboxylate Superplasticizer in High Performance from CNBM

 

 

注意事项:

The matters needing attention:

、不能与松香皂类引气剂同时使用。

1, not with rosin soap air entraining agent and use.

等容器。

2, can not use for a long time the metal container loading available PE, PVC, FRP and other containers.

、不可与萘系外加剂混合使用,否则将导致性能明显降低。

3, not with naphthalene based superplasticizer mixed use, otherwise it will lead to significant performance overhead.

 

 

FAQ:

1.    Q:Are you a manufactory or trading company?

A:We are a professional manufactory with 12 years’ experience and 2 years of export experience, covers an area of 30 acres.

2.    Q: May I know your MOQ request?

A:MOQ is 1 TON. 

3.    Q: Could you offer free sample?

A:We can provide free samples to you for quality testing.

4.    Q: Does your product is dangerous merchandise?

A: Not dangerous merchandise, It belongs to Not legal Inspection merchandise.

5.    Q: What about your packing?

A: Liquid in IBC tank or Flexitank;Powder in woven bags. 

6.    Q: How about your productive capacity?

A: 900000 tons/Year.

7.    Q: What is your export port?

A: China main port.

8.    Q: What is your delivery time?

 A: Within 7 days after received advanced payment.

9.    Q: Can you print logo or label on packing as customer request?

A: Yes, we can customize according to your requirements. 

 

 

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:What is the additive inverse and multiplicative inverse of 15, 1.25, -4/5, and three and 3/4?
2/3^-1+3/2^-1=0
Q:what is additive inverse?
The additive inverse of a number is that number which would be added to it to reach a sum of zero. It is also called the opposite, because (except in the case of zero) it has the same magnitude, but opposite sign. additive inverse of 7 = -7 additive inverse of -5 = 5 additive inverse of 0 = 0
Q:Ordinary flour and what food additives can be made into gluten
Place the flour in the container and add 60% of the water (1% salt in the water) with a considerable flour content, mix thoroughly and form a viscous dough. And then put it aside for 1 hour, the summer standing time can be slightly shorter, to prevent acid. Do not add too much water. So that the protein is too late to be dispersed in the water, to the operation of the difficulties, but also affect the gluten extraction rate.
Q:What do you need to pay attention to using fuel additives?
Add the ratio is generally 1: 1000,1 bottle 50ml additive can be equipped with 50 liters of fuel. In addition, the addition should be depending on the vehicle conditions, models, the vehicle is good for the first time the continuous use of three bottles or so; the situation down, less power vehicles need to use more than 5 bottles until the car condition improved, and then select the box to add once or every Every 1000 km to add once. If the engine is running in good condition, it can be reduced.
Q:How many kilometers to add fuel additives
You must first understand the use of fuel additives! The The Not necessarily have to add, but the amount of the car to add the engine, fuel consumption are helpful! 1. Cleaner Most of the fuel additives on the market are cleaners. As the gasoline contains impurities, a long time, impurities in the oil path, the formation of glial, increase oil resistance and emissions of pollutants, reduce power. Fuel additives can remove these impurities, including glial and carbon deposition. 2. Anti-explosive effect In the introduction of unleaded petrol, we can know that the role of loss of lead, we need to find another way to increase fuel antiknock, there is a class of fuel additives is to increase fuel antiknock, often referred to as " Octane number enhancer ". Usually on a long trip you will find that some gas stations are irresponsible to sell the inferior gasoline to the user, which is very damaging to the engine, so it is advisable to prepare a few bottles of this product before traveling long distances. 3. The role of water in the gasoline contains a certain amount of water, which the same operation of the engine damage, in particular, unleaded gasoline, some anti-explosive additives will absorb moisture in the air, so regular addition of water removal agent is necessary The
Q:Do you want to make money in the retail business of food additives?
Not to say that money can make money, as long as you have the ability to make money!
Q:Nanning where to sell food additives
Generally in the vicinity of the train station or bus station, the door is ** ** chemical, ** food. Know ** food ingredients
Q:Why do additives cause hyperactivity?
Additives for chemicals have different purposes. If you are studying effects of medicines, there are many class of additives. Most common are fillers - This compounds help in preparing dilution for tablating (or other forms of medicines) to help tableting exact dose. These are generally starch or salts. There are some additives being used to encapsulate the medicine. This help in delivering the medicine in the targeted zone. his compounds protect the medicine from being absorbed in region where it is not required - and in most cases it works on pH balance or presence of some specific ions. This compounds indirectly help in improving the efficiency of medicine. Some additives are made to increase the efficiency of the medicine. They are some times other medicine - combination preparations or some enzyme like compounds. It is known as synergistic effect. Increased efficiency - effect of medicines can be identified as hyper activity in body. Some additives are binders - that help tablating.
Q:Are food additives and preservatives the same?
The type of food additives is too wide, contains preservatives, preservatives are only one of them, sodium benzoate, potassium sorbate are low toxicity. Sodium diacetate, sodium dehydroacetate. Plaster and so on
Q:What additives are used for machine pancakes?
Hello, machine pancakes can be added in the batter maltose syrup, bubble more than the source or face Xin crisp, add the bubble more than the source of the pancake fluffy soft, not broken; add the face crisp pancake fluffy crisp, not broken, The OKorder sell bags of bubble and more sources and face Xin crisp.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range