Q:how do i run my power cable wire through the firewall, to my battery in my 1995 Monte carlo?please help?

Now djp answered this question correctly but after drilling the hole makes sure you put a grommet in the hole to prevent a short

Q:Please, its urgent. Is it possible to use another wire? I don't have money btw.

Put a coat hanger on it and wait for a thunderstorm.

Q:What is the best tool or method in your opinion to locate cable damage causing current leak on several cables supplying outdoor lighting as detected by a tripping GFCI breaker. (Or water in a light obviously). Is there a meter that can measure that directly with the power off?

I usually have one of my kids lick their finger and run it along the cable. a lightbulb in the mouth helps.

Q:I am doing a test if the power supply.Can you have the computer on and plugged in with PSU out in the open, leave on the carpet ?Can you have the power cable plugged into the psu first and then try to plug in the psu cable into the mother board. Would this electrocute you? if you accidentally knocked over liquid onto the power supply while the computer is running and you touched the motherboard at the same time while you are perfectly grounded. Can this electrocute you? unpluging the psu connector while the computer is on?

You can but I wouldn't I build PCs all the time in test configurations outside of the case, but I always have everythign on non conductive serfaces, ie wooden tables. Carpet would be a little to staticy for me. Your second scenario leaves two answers for me, both are no, but for different reasons. If I plug a psu into a motherboard with power allready in it, I could short out the motherboard or worse yet shock myself. Also, I don't want to plug a power cable into a psu without any load on the device, doing so can and will fry the psu. depends on the liquid, if it is dionized water, you can turn the pc off dry it out and may be lucky enough not to fry your system. if it is soda,tap water, or salt water of any kind, don't touch it. I don't care if you THINK you are grounded, even if you were, the current would still flow through you, and if you pulled away, out of sudden suprise, then you would get electricuted, not good. Unbluggin the power cord from the powersupply will not be the biggest problem, unless you have very sweaty hands and the air is very dry. Just don't play with electricity

Q:Hello,I recently bought a kotatsu and I really need some help. The power cable is of course Japanese And I need some type of converter.On the part of the cable that plugs into the radiotaor it says:PSE (It's in some square box)JET MR7A 250VOn the end that plugs into the wall it says:PSE (It's in some square box)JET MR7A 125VI''m not sure if a simple small converter to let me put the Japanese cable into my wall is enough, I think I need something extra to make sure nothing goes into flames.Inside the Japanese instruction manual I found some info However, I'm not really sure if it is related to the power supply or notAC100V 50-60Hz400W3.1 (Probably the length of the cable) 1.3 (Same here I think)140Wh 60 Wh55C 37CPlease help me, what should I get to be able to use the cable in Europe. Any links at all will be helpfulThanks.

Don't worry too much about what the cord says. Worry about the power requirements on the appliance label, and making sure you are feeding it with the voltage required, with a capacity within the range. In your instance, you will need a converter transformer that converts your outlet voltage to 100V, and has 550 or larger watt capacity.

Q:I need the cables/cords for the Xbox 360...all the cables/cords

It is easier to get wifi and hook it to your x box if u need the cord for x box live

Q:Recently I bought a EVGA Geforce 8800 GTS. When it came in, the card fits in my case but has 2 cables to plug in. I only have 1 cable to plug them in connected to my power supply. Should i only plug in 1, or is it nessesary? Is there an extra one I just dont know about? Please answer!

You need to get a power cable splitter that goes from two to one. It should have come with the card, if not any local computer store should have one.

Q:i cant drill a hole through the firewall because there's too much stuff in the way. so can i run the power cable to the power wire from the radio. the radio power wire is what im talking about. can i do that instead of running it to the battery? thanks

No you can't use the radio power wire to power your amplifier. That circuit wasn't designed to carry the amount of power you'll be needing. As for getting through the firewall, generally you don't need to drill a hole. There are several holes already you can use. Find where the wire harness crosses the firewall from engine side to the cabin. Or in some cars there are circular rubber plugs in the firewall that you can run cable through. Search forums about your car to see if you can find where other people ran their power cables. In any case you need to make sure you run a dedicated, properly fused, properly sized wire. Otherwise you'll blow fuses or burn your car down.

Q:where do i put the wire through from the inside of the car to the battery located under the hood?

definite you could. you will might desire to purchase an o.e.m advantageous terminal so which you would be able to connect all the skill leads. you will possibly be able to desire to be extra perfect off in basic terms going the dist block direction. A 4 guage to 2 or extra 8 guage block may be discovered on OKorder for under $10 shipped quite easily.

Q:I have a 240 watt jbl subwoofer in my truck and a 200 watt kenwood amp i bought a kit of 550 watts.But i just bought a 900 watt visonik subwoofer and a 700 watt visonik amp. i need to know if i can use the 550 watt power,ground,rca cables for my new system?

yes you can those watts posted are peak power stats.. the rms wattage is less than half that so youll be fine