Full Polished Glazed Porcelain Tile CMAXRG001
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1209.6
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Brief Introduction
Full Polished Glazed Porcelain Tile CMAXRG001 is a very popular color in the present market. Just like other models, it could be used for interior floor for apartment, villa, super market as well as other public areas, due to its stone like surface, being high glossy and clean, homogeneous color shade as well as the reasonable price compared with natural stones.
Product Features
Full Polished Porcelain Tile, high glossy
Grade AAA available only
Strict quality control system on color shade, deformation, anti-pollution, surface glossy degree as well as packing
Much more competitive price
Standard export packing: Pater Carton+ Wooden Pallet
Fast production arrangement
OEM service could be offered based on the actual requirement
Comprehensive marketing support on samples, catalogues as well as carton designing
Professional sales team available for the whole order operation process
Product Specification
Tile Type: Full Polished Glazed Porcelain Tile
Quality standard: GB/T4100-2006, ISO13006, ISO9001
Water Absorption Rate: 《0.5%
Breaking Strength: 》 1800 N
Rupture Modulus: 》40 MPa
Length and Width Tolerance: ±0.1%
Surface Smoothness: ±0.15%
Edge Straightness: ±0.15%
Wearing Strength: 《1600 mm3
Glossiness: 》 90 Degree
Resistance to Chemical: Class UA
Resistance to Staining: Class 3.
Packing Information (For 27.5 Tons heavy 20’Fcl)
For 600x600mm, 4pcs/Ctn, , 35KgS/Ctn, 36 Ctns/Pallet, 780 Ctns/20’Fcl, 1123.2 m2/20’Fcl
For 800x800mm, 3pcs/Ctn, 56Kgs/Ctn, 28 Ctns/Pallet, 500 Ctns/20’Fcl, 960 m2/20’Fcl
Production Line & Package
FAQ
1. What is the delivery time after we paid the deposit?
—— Normally, we shall get all items ready for loading within 3 weeks after we get the deposit or the formal Letter of Credit. For orders which demand cutting job, it will take a longer time.
2. Could you put some samples in the container of our orders?
—— Yes. We’d like to offer free samples in the containers to our clients, with a certain quantity of different models.
3. Could we arrange the our own QC to check the items before container loading?
—— Yes, of course. Your quality checking will be welcome all the times.
- Q:I have hot water radiant heat in a concrete slab that leaks occasionally so I can‘t put carpet on it. Do I dare put ceramic tile over it? Maybe the tile would keep the moisture down.
- You may want to make the first answer the best answer now because you probably won't get a better one. Covering it is a short-term fix and the moisture will continue eventually not only forming mold but the tile will come up.
- Q:I am looking for an obsolete 8X8 ceramic tile I believe was made by Interceramic. It‘s described on my original sales slip from 1999 as IC WestPalm Surf It‘s solid white in color and has a slight pebble texture. I need to modify my kitchen some and don‘t want to tear up the entire floor to install new type tile. Any ideas how to find this tile if there‘s any left out there.
- IC did away with the 8x8 tile about 8 to 10 years ago .. They revamped there line to a 10 and 13 inch tile..10 didn t last long at all..Soon the did away with most all the red bodied tile.. So please don t even bother trying.. You will have to do something else , like a border and or accents. There were reclamation places that bought up old lots of tile but none that I know about now.. Any questions you can e mail me through my avatar.. GL
- Q:In order to be able to tile the windows (instead of the white moulding) like in the second kitchen, what steps would I have to take? Just remove the moulding on the inside then tile?
- You are exactly right just remove the old moldings and you will have to make sure you fill any cracks for water to get in but you just install the tile instead of new molding.
- Q:I need to put a 4 inch hole in a 16 inch ceramic tile.
- Hi okorder /
- Q:I have an on going problem in my kitchen. Same time tile floor was done in our home but kitchen is the problem. It was done 3-4 years ago by a contractor, however he never showed up his face to help us. He left some grout with us and said if ever the grout pops up then we can mix it in the water and fill with this mixture. The grout from the kitchen floor always comes out. Underneath, the kitchen is wood floor. The kitchen is on the second floor. Our family room is also on the second level but no problem to that floor Please help.
- When the tile was laid it didn't have enough mortar/thin set put underneath some tiles...If so then the tiles shift and the grout cracks..I am a 37 year experienced painter, but have done all phases of construction work..I was once being a helper for a regular tile man when the painting was slow, and he had a contractor that before he paidd them , walked around with a golf ball and from a little over waist high he dropped a golf ball on each and every tile..The ball will respond on a properly laid tile and bounce back with a good solid sound..when he reached one that did not bounce all the way back and made a hollow thud sound..he marked that tile and Brian had to pull it and replace it before receiving his check on a completed job.. The best tile layers will possibly have 3 or 4 in a house without enough thin set under them,but a poor tile layer can have 40 or 50 in a house improperly done..TRY THE GOLF BALL TEST yourself and see..before deciding on the points here..I bet one of the tiles on an area where the grout is coming up..will give you that hollow thud..keep in mind there are at least two tile next to the grout, if not 4 if near a corner..I just bet ...get a cheap golf ball and try this..You will see what I'm talking about..You can literaly pull any imporoperly laid tile up if careful without breaking it.. scrape the thin set off..and same for the thin set on the floor..and reset the tiles...Go through test all your tiles..then put one of them flourescent garage stickers on each improper one..then reset them
- Q:I was clowning around with my son and I accidentally knocked over a table and chipped a tile. It's about a quarter size chip.You can actually see the dark bottom part of the tile so its kinda deep. I was wondering if I can fix it without replacing it. What do I need? By the way, I blamed on my 4 year old !!!!!!!!! THX 4 ur help!
- Find a good ceramic cement (ask at a tile shop) and glue the chip back into place. If it's a single chip, and you're very careful, you can make the job almost invisible.
- Q:and people will rip up the 12X12 tile floor and replace it with smaller tiles? Just need a few opinions.
- That size or a variation of that size ( you ll see some 13x13 around) will be here for a long time to come. Its been around for a long time now. The new way to make modular tiles from that size will ensure it stays around longer. This size also fits well into large areas as well as slightly smaller areas. Colors will be the only changes that will occur , as they always do. Any questions you can e mail me through my avatar and check my qualifications there. GL
- Q:I am torn between using roof tile or slate roof? But my husband wanted roof tile more. You think it‘s good to use that?
- Why 2 lengths?. you ought to have the means to get one length for 3m.the less joints the extra constructive.I take it the water is coming from a gutter larger up, in that case in good shape an appropriate bend the place it sheds onto the extension roof and in good shape a downpipe bracket to the wall, this could carry it inflexible at that end, then run your new downpipe for the period of to the place the extension downpipe is,disconnect this from the extension gutter, in good shape a hopper to the precise of the extension downpipe, it feels like a extensive funnel, you will ought to decrease the precise of the downpipe so the prevailing gutter runs into it besides as your new downpipe. fix the recent pipe to the fascia board with yet another bracket, that way you do no longer ought to repair it to the tiles .......good success
- Q:what is vitrified tiles
- Vitrified tile is a tile that has undergone a certain process that gives it extremely low porosity, and thus, very low water absorption. This makes the tile hard and strong, as well as stain resistant.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Full Polished Glazed Porcelain Tile CMAXRG001
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1209.6
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords