Led Tube Bulbs high luminance No driver and AC directly drive
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 5 pc
- Supply Capability:
- 100000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Item specifice
Products features
1. Patented AC (Alternative current) directly drive.
2. No LED driver design, replace the LED driver by AC chips, more stable and reliable.
3. The invention won the Award of 2014 Geneva International Exhibition of Inventions
4. Prolong the service life of T8 tube to 50,000 hours, it is 2 times as long as traditional driver.
5. High light efficiency. Use high quality SMD chips to ensure the high light efficiency
6. Low lumens depreciation. Less than 3% per year. The users needn’t to replace the tube during 4-8 years.
LED T8 tube 18W | |
Electric parameter | |
Power | 18W |
Voltage | 160~270V AC,50/60Hz |
Power Factor | ≥0.95 |
Operating Temperature | -40℃~50℃,20%~90% H.R. |
Storage Temperature | -40℃~80℃,10%~90% H.R. |
Optical parameter | |
Color Temperature | 5500-6300K |
The LED type | 5630 SMD LED |
Number of LED | 80 PCS |
Angle of LED | 120(Degree) |
Luminous Flux | 1530Lm |
Photosynthetic efficiency | ≥85Lm/W |
Physical parameter | |
Level of Waterproof | IP55 |
Service life | 50000 H |
Electrical categories | ΙClass |
Lamp cover material | High light transmittance glass tube |
Lamp cover color | Milk white |
length | 1200mm |
diameter | 26mm |
Lamp weight | 0.41Kg/0.904lbs |
Mode of package | 30Units/Ctn |
Package measurements | |
Package weight | 15.3KG (33.8lbs) |
LED T8 tube 10W | |
Electric parameter | |
Power | 10W |
Voltage | 160~270V AC,50/60Hz |
Power Factor | ≥0.95 |
Operating Temperature | -40℃~50℃,20%~90% H.R. |
Storage Temperature | -40℃~80℃,10%~90% H.R. |
Optical parameter | |
Color Temperature | 5500-6300K |
The LED type | 5630 SMD LED |
Number of LED | 75 PCS |
Angle of LED | 120(Degree) |
Luminous Flux | 850Lm |
Photosynthetic efficiency | ≥85Lm/W |
Physical parameter | |
Level of Waterproof | IP55 |
Service life | 50000 H |
Electrical categories | ΙClass |
Lamp cover material | High light transmittance glass tube |
Lamp cover color | Milk white |
Length | 600mm |
diameter | 26mm |
Lamp weight | 0.41Kg/0.904lbs |
Mode of package | 30Units/Ctn |
Package measurements | |
Package weight | 8KG (17.7lbs) |
Revolutionary no driver LED, Alternative directly drive, high efficiency and stability
Pioneered the AC directly drive LED solution, replaced the traditional LED driver by TF-11 and G13 chips. The patented technology won the award of 2014 Geneva International Exhibition of Inventions. The reliability and service life of LED are improved enormously by AC directly drive solution. The service life of AC drive solution surpasses 100,000 hours.
High grade luminous source
Professional encapsulated SMD 5730 with high quality LED chips ensures the LED resource obtaining excellent protection of optical attenuation and the heat conduction ratio. Reduced the optical attention rate to the minimum value as 3% per year.
Triple heat dissipation, Super long service life.
Utilizing high thermal conductivity aluminum plate, high purity glass tube and no LED driver consumption, the triple heat dissipation design ensures that chips can conducting the heat rapidly. Our LED tubes are driven directly by Alternative current without delay start, unaffected by electric fluctuation. The service life of T8 tube is more than 50,000 hours and it’s 2 times than that of traditional LED driver tube. So users needn’t replace the tube in 4-8 years.
Uniform illuminance, Comfortable visual sense
The LED tubes use high luminous transmittance glass tube to reach high transmissivity, the transmissivity over 99%.
The surface of tube was frosted without light spot. The light is soft and pure spectrum, high CRI ( color rendering index )without ultraviolet ray, infrared radiation, ensure users a comfortable visual sense.
Our tube process soft light, pure spectrum, high CRI ( color rendering index ) without ultraviolet ray, infrared radiation to ensure users a comfortable visual sense.
- Q:The LED T5 daylight lamp can be used for how long
- In five years, are you sure you can find each other easily? If the warranty doesn't go away, you say no. The other person is said to be bao 5 years, that want to be sure, in 5 years the light of the year of the light to fall is normal, should be certain that the person of the other person 5 years of light to be not more than 15%, that is the real guarantee 5 years. If the light is more than 20 percent after four years, the light is still bright. If the bulk purchase can be measured by the illuminometer, then measure it every year. But you're going to do it for five years. In the case of 24 hours of use, it's pretty good to be able to control over 10% in two years. If the best use of the industry is to use an external drive power source, the heat dissipation will not affect each other, and it will last longer if the lamp is identical in quality. But the installation will be a little bit more cumbersome than the built-in one.
- Q:Currently, the 48-inch led fluorescent lamp tube 18w is used for how much dc voltage
- There is very little dc voltage input on the market, and there is also a built-in external drive. Most of them are built in, with 220V input.
- Q:What does LED light tube integration mean
- The integral whole cannot be removed (including lamp shade, LED lamp bead, constant current source, lamp tube support), directly plug in the electric light.
- Q:What specification does daylight lamp tube have, what brand of fluorescent lamp?
- On the alternative, leds may be more efficient and more efficient. Through the relevant departments of the test, the led fluorescent lamp light is more soft, not dazzling, and higher brightness, so particularly in the installation of sitting room and bedroom, suggest or with lower power, led fluorescent lamp, so to the protection of the eye.
- Q:What is the category of LED bulbs, T6, T8 or whatever?
- In practical use, thin lamp tube is easy to conceal, use the occasion also be flexible, this is why T5, T4 light tube to get the reason that stylist people favour However, the more difficult the tube is, the more difficult it will be, so when it comes to the T5, the electronic ballast must be used to start the lamp. In order to save costs, T5, T4 of miniature stents has been adopted in the form of sale, mini space is the ballast in bracket, the efficiency and quality of the ballast are generally not very good, should lead to very high efficiency tubes as conventional T8 tubes instead of bright, life can be a little discount. Still, the lure of the tube is still strong, and the T5 and T4 bulbs are selling more and more. The difference between T5 and T4: The theory should be that T4 is efficient, but because of the quality of the ballast, many T4 is not as bright as T5. Life and stability are different, T4 is not as mature as T5, so life expectancy is slightly shorter than T5
- Q:What is the idea of an LED daylight lamp called T5 or T8?
- The so-called integration of T5 and T8 tubes, we can understand from the literal Angle, explained the T5 / T8 I won't do, you should know. Let's look at the integration The so-called integration is lamp and stents are conjoined. From what we often see T5 and T8 are generally and stent can separate the tubes, can say down from the scaffold tubes, and the integration of can't get down. I want to say so, you should be clear!
- Q:What happens when daylight lights go on
- Fluorescent lamp is made of daylight lamp, ballast, consisting of the starter, under normal circumstances fluorescent lamp in the process of start, due to the action of bimetallic strip within the starter, make a sound, "da" start fluorescent work light. The sound is usually the "buzz..." when it's on. Current sound, the sound is due to the ballast assembly is not tight, leaching asphalt technology is bad internal noise caused by loose of silicon steel sheet, and some small factory's products to reduce costs is omitted asphalt link, appear easily in the use of sound.
- Q:The LED light bulb is more efficient than the daylight lamp
- In the same power, it's more efficient.I hope my answer is useful to you.
- Q:How is the T8LED fluorescent lamp installed?
- If it is old fashioned, you must cut the input of the ballast and install it as shown below.
- Q:Does the installation of LED fluorescent bulbs need to be positive and negative
- It depends on whether your power is external, or is it built in, so if you have an external one, you don't have to have it built in,
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Led Tube Bulbs high luminance No driver and AC directly drive
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 5 pc
- Supply Capability:
- 100000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords