Ptfe Coated Aluminum Foil

Hot Products

FAQ

The difference between alkali resistant mesh fabric emulsion and urine glue 7.5
Mesh fabric with plastic glue and latex urinary two relatively better quality products than latex products produced urine glue surface is relatively soft but not broken some customers customized urine gum products according to different uses, our factory can also be customized according to customer requirements of the product corresponds to a
Where are the steel wire mesh and the alkali resistant grid cloth used in the exterior wall insulation?
The wall is filled with aerated blocks. Use shotcrete interface agent and then steel wire mesh. Is the foundation for the structure of the wall, after the thermal expansion and contraction, plastering no hollowing, cracking. Using mesh cloth for full paving. To reach the wall roughness, strengthen the surface cohesion, and consolidate the grassroots. Steel nets are generally used in the decoration, in the masonry wall and the original wall of the junction, but also can be used in the light body wall reinforcement. Mesh cloth is suitable for use in many parts.
What is the use of alkali resistant fiberglass mesh cloth on the exterior wall?
The use of composite plaster mortar of alkali resistant glass fiber cloth, on the one hand, can effectively increase the tensile strength of the protective layer, on the other hand, can effectively disperse stress, can be originally may have wider cracks spread into many smaller cracks, thus forming the crack in. The surface coating material and the amount of coating have important significance to the alkali resistance of glass fiber mesh cloth, and the glass fiber variety has a decisive significance for long-term alkali resistance. In the process of using glass fiber mesh: mesh between lap width not less than 50mm, the negative corner mesh to pressure stubble lap, its width is larger than 50mm, yang angle is greater than or equal to 200mm. In the construction, mesh paving should be smooth, no wrinkles, mortar plumpness reached 100%, at the same time to find and maintain smooth, straight corner square and the verticality of yin and yang.
How is fiberglass mesh used?
Brushing the wall latex Putie mesh cloth, mesh cloth to Putie formation, Jiecha overlap should be at least 50MM, to be completely dry after the wall, and then carry out the procedure.
Slotted walls, seams, seams, tape, or anti mesh cloth?
Very simple, you do not have to spend so much money to buy what tape and mesh cloth, is decorated well, to buy the cheapest dacron, remember to not want that kind of chemical fiber, cotton, cotton for a long time to decay. Because in the fiber wall sealed with aging, so. Then through the plaster smooth dry, tore the cloth into strips, glue brush in the gap, and then dried, powder, and you will not crack, affordable, the effect is very good, we give people a lot of friends after use, not see who split over ten years.
The building is how to choose the external wall thermal insulation material of glass fiber mesh cloth?
The building often causes the perineum to warm up and contract cold and cause cracks. Reduce the service life, glass fiber mesh cloth can be the maximum restraint to reduce such adverse effects. The glass fiber mesh cloth is insulated and used in the outer part of the main structure so as to save indoor space. It is effective enough for indoor use
What kind of wall fabric is covered with fiberglass mesh? Do you apply the powder or the powder? Thank you
And the wallFully paved, just an industry standard, the requirements are yes, but rare, there are really such a use, on the one hand is the cost, on the one hand is now mostly cast-in-place, there is no need!
Can indoor glass fiber mesh cloth be stuck with wall tiles?
Yes, glass fiber mesh is used for roofing, waterproofing and gypsum, marble, mosaic and other wall or plate reinforcement.