Type C/CHD Pneumatic Spiders
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 Piece pc
- Supply Capability:
- 28 Pieces per Month pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Pneumatic Spiders
2.Type C/CHD
3.Pipe Range: 1.315-5 1/2 inch
4.rated load of Type C:80T
5.rated load of Type CHD:120T
Type C/CHD Pneumatic Spiders are utilized to handling drill pipe and tube in oil well repairing. This type spider can accomodate pipe from 1.315-5 1/2 inch, the rated road of type C pneumatic spider is 80 ton, the rated road of type CHD pneumatic spider is 120 ton.
Slip Body Size | Type | Cylinder Work Pressure | ||||
C/80Ton | CHD/120Ton | |||||
Pipe Size | Pipe Size | Mpa | Psi | |||
in | mm | in | mm | 0.6-0.9 | 87-130 | |
2 1/16 in | 1.315 | 33.4 | 1.315 | 33.4 | ||
1.66 | 42.2 | 1.66 | 42.2 | |||
1.9 | 48.3 | 1.9 | 48.3 | |||
2 1/16 | 52.4 | 2 1/16 | 52.4 | |||
3 1/2 in | 2 3/8 | 60.3 | 2 3/8 | 60.3 | ||
2 7/8 | 73 | 2 7/8 | 73 | |||
3 1/2 | 88.9 | 3 1/2 | 88.9 | |||
4 1/2 in | 3 1/2 | 88.9 | 3 1/2 | 88.9 | ||
4 | 101.6 | 4 | 101.6 | |||
4 1/2 | 114.3 | 4 1/2 | 114.3 | |||
5 in | 5 | 127 | 5 | 127 | ||
5 1/2 in | 5 1/2 | 139.7 | 5 1/2 | 139.7 |
- Q:Specific depends on what number you are cone sets, you can compare:0 1:19.212 9.0451 1:20.047 12.0652 1:20.020 17.783 1:19.922 23.8254 1:19.254 31.2675 1:19.002 44.3996 1:19.180 63.348
- 0∶19.212 9.0451∶20.047 12.0652∶20.020 17.783∶19.922 23.8254∶19.254 31.2675∶19.002 44.3996∶19.180 63.348
- Q:How do you determine the size of the drill sleeve with a drill diameter of 6?. Thank you
- The inner diameter of the general drill sleeve can be chosen by H9, but the deformation of the drill sleeve after the quenching has to be considered
- Q:I wonder if it works Because of the large number of drilled holes, the wear of common steel is relatively large. But T10 steel needs quenching. I don't have any specialized equipment here. Usually it is heated by oxygen acetylene, and then it is quenched by oil. I wonder if T10 steel is good. What about the deformation? Outside diameter 15mm, inner hole 8.6MMIf not, what is the best way to do it? Or what to replace?
- I analyze your accuracy requirements are not high, no problem. The heating temperature is not too high, oil cooling, then take the gun fire roast, return fire, file inspection for hardness
- Q:What kinds of drill sleeves are used? What are they used for?
- Drill sleeve can be divided into four kinds, namely: fixed drilling sleeve, interchangeable drill sleeve, fast change drill sleeve, special drill sleeve.Fixed drill sleeve: drill sleeve is directly pressed on the drilling template. The fixing drill sleeve is simple in structure and high in drilling accuracy, but it can not be replaced after wearing. Fixed drill sleeves are suitable for small batch production in a single drilling process.Replaceable drill sleeve: drill is sheathed in the Bush, bushing is pressed on the drilling template, and the drill sleeve is pressed by screw to prevent the drill bush from rotating or withdrawing. When the drill sleeve is worn, loosen the screws and replace them quickly. A single drilling procedure suitable for mass production.Quick change drill sleeve: its structure is similar to interchangeable drill sleeve. When the workpiece in one process has the same hole to be processed by various methods (such as drilling, reaming, reaming, tapping, etc.), the drill sleeve with different apertures can be quickly replaced. When replacing, the drill sleeve gap is turned to the screw and can be taken out.Special drill sleeve: when the structure of the workpiece is not suitable for the use of standard drill sleeve, it can design a special drill sleeve adapted to the workpiece. The height of the drill sleeve is increased by H, the guiding performance is good, the tool rigidity is improved, and the machining accuracy is high, but the abrasion of the drill sleeve and the cutter is intensified, and the H= (1 to 2.5) d is generally taken. The chip space H increases and the chip removal is convenient, but the tool rigidity and the machining accuracy of the hole will be reduced. Cast iron for drilling easier to remove chips, h= (0.3 ~ 0.7) d; drilling difficult to chip out of the steel parts, h= (0.7 ~ 1.5) d.
- Q:I have seen many drilling techniques in practice, and I find that drilling jigs do not have guiding elements (i.e. drill sleeves). Why do not they use drill sleeves in actual production? And I have seen in many books drilling jig, need drill sleeve of the statement, how is this matter?Reaming in our company is also done by drilling machines. Change the drill bit to the reamer. Do you want reaming?I asked the master of the workshop why the drilling fixture does not need to drill, they do not even know what the drill sleeve is, as if they are in the design of drilling machine clamp, there is no drill sleeve concept.I really don't understand why the drilling jig is using drill sleeves If it is for the tool, you can put on a processed product, and then the tool is ok. Why?
- In the actual drilling process, the drilling machine fixture should have guiding element (drill sleeve), why does your company not use drill sleeve in actual production?There may be several reasonsThe 1 bit and the products to be machined are fixed, and the drill bit has sufficient positioning for steel2 the shape tolerance of the hole to be drilled has no requirementThe 3 bit has a self - located cutting edgeReaming generally does not require additional positioning, the pre drilling itself plays a guiding role. In particular, there are positioning
- Q:Drill 4.2 holes, tap 5 thread, choose what kind of drill sleeve
- Tapping 5 of the thread, drilling 4.2 of the hole, you need to drill sleeve, indicating that the screw hole distance, position tolerances, usually is + 0.1.In general, the tolerance of the drill hole to the choice of F7 is 4.2F7, that is, Phi 4.2 (+0.022 / +0.01).Drill sleeve material, you can choose T8, T10, etc., more than HRC60 quenching.Drill sleeve form can be chosen by oneself (fixed drilling sleeve, quick change drill sleeve, etc.).
- Q:How should the drill bit of the 4mm bit be calculated?
- The drill bit for the 4mm is generally larger than the drill sleeve about 4 or 0.03Such coordination is more accurateSpecific access to relevant GB requirements
- Q:Can the drill jig designed in mechanical processing be without drill bush?
- May not。 The drill sleeve is the guide of the drill bit, reamer and reamer. The tool is of high hardness. If it is not drilled, it will lose its guiding effect very quickly. Drill sleeve materials such as T8A, T10A, is the high quality carbon steel, general file, ordinary drill, scraper, are made of it, high hardness after quenching, can reach HRC60.
1. Manufacturer Overview |
|
---|---|
Location | Jiangsu,China |
Year Established | 2000 |
Annual Output Value | |
Main Markets | North America South America Mid East Central America |
Company Certifications | ISO 9001:2008;ISO 14001:2004 |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | English, Chinese |
b)Factory Information | |
Factory Size: | 10,000-30,000 square meters |
No. of Production Lines | 4 |
Contract Manufacturing | OEM Service Offered Design Service Offered Buyer Label Offered |
Product Price Range | Low and/or Average |
Send your message to us
Type C/CHD Pneumatic Spiders
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 Piece pc
- Supply Capability:
- 28 Pieces per Month pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords