the Nut Coke of 10-30mm for Ferro Alloy Plants

Ref Price:
Loading Port:
Tianjin
Payment Terms:
TT OR LC
Min Order Qty:
100 m.t.
Supply Capability:
3000 m.t./month
Inquire Now Customer Service

Contact us by

(1) WeChat
(2) Whatsapp: +8617190086776

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

the Nut Coke of 10-30mm for Ferro Alloy Plants


1. Structure of the Nut Coke of 10-30mm for Ferro Alloy Plants Description

Coke is made by high temperature metallurgical coke for blast furnace smelting, casting and gasification. Occurring in the process of coking after recovery and purification of coke oven gas is a high calorific value of fuel, is an important industrial raw material in organic synthesis.

Coke is mainly used for blast furnace ironmaking and used for copper, lead, zinc, titanium, antimony, mercury and other non-ferrous metal smelting of blast furnace, reducing agent, compound and the function of stock column frame.

Blast furnace with Coke instead of charcoal, which laid a foundation for the large-scale of modern blast furnace, is a major milestone in the history of metallurgy.

2. Main Features of the Nut Coke of 10-30mm for Ferro Alloy Plants

     Quality assurance

     Mutual benefit

     Preferential price

3. the Nut Coke of 10-30mm for Ferro Alloy Plants Images:

the Nut Coke of 10-30mm for Ferro Alloy Plants

the Nut Coke of 10-30mm for Ferro Alloy Plants

the Nut Coke of 10-30mm for Ferro Alloy Plants



 

4. the Nut Coke of 10-30mm for Ferro Alloy Plants Specification:

Parameters

Guarantee

Rejection

Total Moisture ( As received basis )

8% max


Ash ( dry basis )

12.5% max

> 13.5%

Volatile Matter ( dry basis )

1.5% max

> 1.8%

Sulphur ( dry basis )

0.70% max

> 0.80%

Phosphorus ( dry basis )

0.035% max

> 0.045%

Size 10-30 mm

90% min


+30 mm

5% max

> 8%

-10 mm

5% max

>8%


5. FAQ

We have organized several common questions for our clients,may help you sincerely:

1) How to guarantee the quality of the products

We have established the international advanced quality management system,every link from raw material to final product we have strict quality test;We resolutely put an end to unqualified products flowing into the market. At the same time, we will provide necessary follow-up service assurance.

2) What are coke's main physical properties?

The average heat capacity is 0.808 kj/(KGK) (100 ℃), 1.465 kj/(KGK) (1000 ℃)

Thermal conductivity is 2.64 kj/(MHK) (room temperature), 6.91 kj/(MHK) (900 ℃);

Ignition temperature (air) is 450-650 ℃.

3) How about your company

Our company began to export coke when China cancelled 40% of coke export tariffs and quotas on January 1, 2013. We export many kinds of coke, such as CSR60 % and CSR 62% metallurgical coke (met coke), the NUT coke of 20 to 50 mm, coke breeze of 3 to 6 mm, and so on.


 

 

 

 


Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:What is the concept, relationship and difference between coke and coke? The main difference and contact, thank you
Formed coke is a product obtained through several steps:(1) environmental protection continuous high efficiency carbonization furnace(2) the use of anthracite powder to produce plastic molding coke and supporting technology(3) a new type of environmentally friendly carbonization carbonization furnace without three wastes discharge.(4) hydraulic press
Q:The specifications for coke used in stainless steel smelting are as follows
Three metallurgical coke: fixed carbon 83-84.5%; calorific value 6500cal/kg; ash < 15%; volatile < 1.9%; all 6% "1%" water; sulfur;Maybe not, I'll give you a web site, find it yourself
Q:Distinction and distinction of cokeSoil coke, improved coke, coke machine coke do, what is the difference between
The concept of coke:Bituminous coal in the absence of air is heated to 950-1050 DEG C, after drying, pyrolysis, melting, bonding, curing and contraction of the final stage of this process is made of coke, coking high temperature (high temperature carbonization). By high temperature coking coke for blast furnace smelting, casting and gas generated in the process of coking. After the recovery and after the purification of coke oven gas is not only a high calorific value of fuel, and is an important raw material for organic synthesis industry. Metallurgical coke is coke, coke, iron alloy coke and non-ferrous metal smelting coke for metallurgical coke collectively. More than 90% were used for blast furnace ironmaking blast furnace coke, so often referred to as metallurgical coke is coke. The special cupola molten iron and coke. Coke is the main fuel cupola molten iron. It is melting charge and molten steel overheating, the support column to maintain its good permeability. Therefore, coke should be Preparation of large blocks, low reactivity, porosity is small, with impact crushing strength, low ash and sulfur enough.
Q:What are the national standards for grade two coke?
Two national standards for metallurgical coke: total sulfur: 0.61 - 0.80; ash: 12.01 - 13.50
Q:Why use coke instead of carbon in blast furnace ironmaking
Under the condition of isolated air, the bituminous coal is heated to 950-1050 DEG C, and finally, the coke is made by drying, pyrolysis, melting, bonding, solidification and shrinkage
Q:What is the reasonable ratio of coal to coke
According to the proportion of each unit type, different operation, different existing coal and different coke quality requirements are different and so on, can be said to suggest that the landlord can look at the altar of the myriads of changes, in some aspects of the coal blending, grasp some general principles, and then develop the proportion according to the actual situation.
Q:What are the companies that produce coke
Very much, what kind of coke do you want, our company would like to buy coke particles
Q:Standard grade two grade coke standard
2, the phosphorus in the coke: iron metallurgical coke coke content should be in the following 0.02 - 0.03%.3, the ash content of coke: Coke Ash on the impact of the blast furnace smelting is very significant. Coke ash increased by 1%, coke consumption increased by 2 - 2.5%, therefore, the reduction of coke ash is very necessary.4, volatile in coke: according to the volatile content of coke can determine the maturity of coke. Such as volatile content is greater than 1.5%, is said to produce coke; volatile less than 0.5 - 0.7%, it is said to be overdone, the general maturity of metallurgical coke volatile is divided into about 1%.
Q:Coke is how to make it? What is the use?
Coke production has prepared the material into the coal charging car from coal tower, were sent to the furnace chamber. The gas produced by the dry distillation is sent to the chemical product recovery workshop for processing. After a coking period (from charging to pushing the required time is generally 14 to 18 hours, depending on the carbonization chamber and the width), a pusher will mature by refining coke coke machine into the coke car; coke quenching, coke is discharged into the cold coke; then screening and storage (Figure 4).The coking plant is generally composed of two coke ovens. The two coke ovens are arranged on the same central line, and a coal tower is arranged in the middle. A furnace with coke oven machinery -- corresponding charging car and coke machine, machine coke, coke quenching car and motor vehicle; also equipped with a set of facilities including coke quenching, coke quenching tower, coke quenching pump, coke powder and coke powder sedimentation tank grab, arranged in the end furnace group. The center of the coke quenching tower is not less than 40 meters from the center of the carbonization chamber. If dry coke quenching, coke oven station. The coking plant is also equipped with the necessary piping and reversing system.
Q:How much coke can a ton of coal
But before the words to use 1.5 tons of coking coal to produce a total of 1 tons of coke

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range