The Metallurgical Coke of Size is 30 -- 80 mm
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m.t.
- Supply Capability:
- 3000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1. Structure of The Metallurgical Coke of Size is 30 -- 80 mm Description：
Coke is made by high temperature metallurgical coke for blast furnace smelting, casting and gasification. Occurring in the process of coking after recovery and purification of coke oven gas is a high calorific value of fuel, is an important industrial raw material in organic synthesis.
Coke is mainly used for blast furnace ironmaking and used for copper, lead, zinc, titanium, antimony, mercury and other non-ferrous metal smelting of blast furnace, reducing agent, compound and the function of stock column frame.
Blast furnace with Coke instead of charcoal, which laid a foundation for the large-scale of modern blast furnace, is a major milestone in the history of metallurgy.
2. Main Features of The Metallurgical Coke of Size is 30 -- 80 mm：
• Quality assurance
• Mutual benefit
• Preferential price
• Various choice
3. The Metallurgical Coke of Size is 30 -- 80 mm Images:
4. The Metallurgical Coke of Size is 30 -- 80 mm Specification:
Parameters | Ash(DB) | Sulphur (DB) | CSR
| Size 30-80mm | +80mm
| -30mm |
Guarantee | 12.5%max | 0.7%max | 62%min | 90%min | 5%max | 5%max |
5. FAQ
We have organized several common questions for our clients，may help you sincerely：
1) How to guarantee the quality of the products？
We have established the international advanced quality management system，every link from raw material to final product we have strict quality test；We resolutely put an end to unqualified products flowing into the market. At the same time, we will provide necessary follow-up service assurance.
2) What are coke's main physical properties?
The average heat capacity is 0.808 kj/(KGK) (100 ℃), 1.465 kj/(KGK) (1000 ℃)
Thermal conductivity is 2.64 kj/(MHK) (room temperature), 6.91 kj/(MHK) (900 ℃);
Ignition temperature (air) is 450-650 ℃.
3) How about your company？
Our company began to export coke when China cancelled 40% of coke export tariffs and quotas on January 1, 2013. We export many kinds of coke, such as CSR60 % and CSR 62% metallurgical coke (met coke), the NUT coke of 20 to 50 mm, coke breeze of 3 to 6 mm, and so on.
- Q: What is the concept, relationship and difference between coke and coke? The main difference and contact, thank you
- Formed coke is a product obtained through several steps:(1) environmental protection continuous high efficiency carbonization furnace(2) the use of anthracite powder to produce plastic molding coke and supporting technology(3) a new type of environmentally friendly carbonization carbonization furnace without three wastes discharge.(4) hydraulic press
- Q: What is the reasonable standard of volatile content of coke
- Generally speaking, the volatile content of coke is about 1.5 or so, but not more than 2
- Q: How much coke can a ton of coal
- The key depends on volatile coking coal quality good volatile low words should now 1.3-1.4 tons of coking coal out of a ton of coke
- Q: Some experimental results summarized the following two facts: the coke can not be used to restore aluminum mine, but it can be used for the reduction of copper and iron; no containing copper sulfate solution with tin, thus the activity sequence C, Al, Cu, Fe of the four elements is ______.
- K, Ca, Na, C, Mg, Al is not able to use C, CO, H2 and so on to restore the preparation of metal, because these metals are very active, can be used to restore copper and iron ore, indicating that the reduction of strong;
- Q: The sulfur content of coal and coke in general, the coking process of sulfur content of coal into the output of sulfur content of coke compared to those who are high and low?
- Of course, the sulfur content of coke is low. Coke quality requirements: two grade coke containing sulfur below 0.7%
- Q: What are the requirements for the quality of coke in blast furnace smelting
- 4, volatile in coke: according to the volatile content of coke can determine the maturity of coke. Such as volatile content is greater than 1.5%, is said to produce coke; volatile less than 0.5 - 0.7%, it is said to be overdone, the general maturity of metallurgical coke volatile is divided into about 1%.5, the moisture in the coke: water fluctuations will make the measurement of coke is not allowed, resulting in fluctuations in furnace conditions. In addition, the increase in the moisture content of Coke will make the M04 high, M10 is low, the drum index error.6, the screening of coke composition: in the blast furnace coke particle size is also very important. In the past, the particle size of coke in our country is as follows: the coke size of large coke oven (1300 - 2000 square meters) is greater than 40 mm; the coke size of medium and small blast furnace is larger than 25 mm. However, some of the steel test shows that the coke particle size of 40 - 25 mm as well. Larger than 80 mm of coke to be whole, so that the particle size range. The coke block is uniform, the gap is large, the resistance is small, and the furnace condition runs well.
- Q: Coke in the whole process of steelmaking in the end is what to do, just to provide heat or carbon and other substances into steel or iron?In the study of coal classification inside, one is divided into coking coal, coking coal and coke as main, and then you see is steel or iron coke must material. What is not clear. In the end, out of coal mining is mainly used to burn energy extraction, or said that coal like oil can be converted into other products, which is a coke can convert?
- Coke is not used for blast furnace ironmakingThe use of blast furnace burden include iron ore (natural ore, sinter and pellets), solvent (limestone or dolomite), and coke, charge from top order batch into the furnace. Coke in the blast furnace ironmaking can be summarized as follows:(1) provide the heat: coke in the coke oven in front of the raceway in the intense combustion, combustion heat generated in the blast furnace smelting process is the main heat source(2) reduction: high temperature gas generated in coke combustion in the raceway, passed to the material in the process of heat rising, the endothermic reaction and coke formation, CO and H2, then CO and iron oxide in iron ore reduction reaction is transformed into metallic iron.
- Q: How long should it be to store coke in the open air
- The ground is flat, so it is convenient to transport.In addition, if it can be stored indoors, try not to open. For shelter.
- Q: The difference between coke and coal
- This is the nature of coal from the formation of coal is coal, and coal deep-processing products
- Q: Effect of coke powder ratio on the index
- 2, the phosphorus content of coke: iron metallurgical coke content should be 0.02 - 0.03%.3, coke ash: blast furnace coke ash effect is very significant. The amount of coke ash in coke increased by 1%, an increase of 2 - 2.5%., therefore, a decrease in coke ash is necessary4, coke volatile: according to the coke can be judged by the volatile content of volatile volatile is greater than 1.5%, then the coke; volatile less than 0.5 - 0.7%, which means that too much, generally mature volatile metallurgical coke to about 1%.5, coke moisture: moisture fluctuations should not be measured in coke, causing fluctuations in the furnace conditions. In addition, increased M04 coke moisture content high, low M10, the drum index error
Send your message to us
The Metallurgical Coke of Size is 30 -- 80 mm
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m.t.
- Supply Capability:
- 3000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
