the Metallurgical Coke of Size is 30 ---- 80 mm
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m.t.
- Supply Capability:
- 3000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1. Structure of the Metallurgical Coke of Size is 30 ---- 80 mm Description:
Coke is made by high temperature metallurgical coke for blast furnace smelting, casting and gasification. Occurring in the process of coking after recovery and purification of coke oven gas is a high calorific value of fuel, is an important industrial raw material in organic synthesis.
Coke is mainly used for blast furnace ironmaking and used for copper, lead, zinc, titanium, antimony, mercury and other non-ferrous metal smelting of blast furnace, reducing agent, compound and the function of stock column frame.
Blast furnace with Coke instead of charcoal, which laid a foundation for the large-scale of modern blast furnace, is a major milestone in the history of metallurgy.
2. Main Features of the Metallurgical Coke of Size is 30 ---- 80 mm:
• Quality assurance
• Mutual benefit
• Preferential price
• Various choice
3. The Metallurgical Coke of Size is 30 ---- 80 mm Images:
4. The Metallurgical Coke of Size is 30 ---- 80 mm Specification:
Parameters | Ash(DB) | Sulphur (DB) | CSR
| Size 30-80mm | +80mm
| -30mm |
Guarantee | 12.5%max | 0.7%max | 62%min | 90%min | 5%max | 5%max |
5. FAQ
We have organized several common questions for our clients,may help you sincerely:
1) How to guarantee the quality of the products?
We have established the international advanced quality management system,every link from raw material to final product we have strict quality test;We resolutely put an end to unqualified products flowing into the market. At the same time, we will provide necessary follow-up service assurance.
2) What are coke's main physical properties?
The average heat capacity is 0.808 kj/(KGK) (100 ℃), 1.465 kj/(KGK) (1000 ℃)
Thermal conductivity is 2.64 kj/(MHK) (room temperature), 6.91 kj/(MHK) (900 ℃);
Ignition temperature (air) is 450-650 ℃.
3) How about your company?
Our company began to export coke when China cancelled 40% of coke export tariffs and quotas on January 1, 2013. We export many kinds of coke, such as CSR60 % and CSR 62% metallurgical coke (met coke), the NUT coke of 20 to 50 mm, coke breeze of 3 to 6 mm, and so on.
- Q:How to remove the bottom of coke steel
- So that the whole place to restore the original black dye can be done.Water sandpaper rubbing can of course, but in the end to more than 1000 mesh water sandpapering. Another 100 clean cloth polishing line. The coke on the stove can only be removed by hand.Finally, wash the rice cooker, stove, as well as your tired hands, thoroughly washed several times. Here, everything is back to normal, as if nothing had happened.
- Q:What is the difference between coke and semi coke in ferrosilicon smelting process? In the process of energy statistics in the end should be 0.9714 of the conversion coefficient should be used with the conversion coefficient of 0.75 x 0.9714, please expert advice? emergencyUrgent!
- The difference between them is that the final temperature of the two, the use of different raw materials, product yield and product properties are not the same. Low temperature coke. Under the condition that the coal is isolated from the air, the product is heated to 500 to 600 DEG C to obtain the product. It uses the raw coal is lignite, metamorphic degree of coal, long flame coal and gas coal. The final purpose of the low temperature carbonization is to obtain high yield coal tar
- Q:Coke indicators are divided into grades
- Coke is a solid product of high temperature carbonization, the main component is carbon, is a crack and irregular pore structure (or porous). The number of cracks has a direct impact on the strength and crushing strength of the coke, the index is generally measured in terms of crack degree (the number of cracks in the unit volume coke).
- Q:What is the phosphorus content in coke
- Generally, the phosphorus content of coke is low, about 0.02%.The bituminous coal is heated to 950-1050 DEG C under the condition of air isolation
- Q:Braised meat burning coke, iron black layer, I do not know how to clean, please help answer
- If the paste pot may wish to try the following several waysBrush pot1, with hot water can be, it is easy to wash, do not use wire brush the ball, put the pot brush bad, if it is aluminum brush used for cooking after eating on the body is very good. (if you must brush it, you can use the cloth to replace the steel ball)
- Q:What is the concept, relationship and difference between coke and coke? The main difference and contact, thank you
- Formed coke is a product obtained through several steps:(1) environmental protection continuous high efficiency carbonization furnace(2) the use of anthracite powder to produce plastic molding coke and supporting technology(3) a new type of environmentally friendly carbonization carbonization furnace without three wastes discharge.(4) hydraulic press
- Q:Coke crushing, coke plant equipment, coke jaw crusher, coke crushing equipment prices, manufacturers offer? How is the output of these equipments?
- The number of cracks has a direct impact on the strength and crushing strength of the coke, the index is generally measured in terms of crack degree (the number of cracks in the unit volume coke)
- Q:Effect of coke powder ratio on the index
- Evaluation of coke quality1, coke: sulfur sulfur is a harmful impurity, pig iron smelting, which makes it one of the iron quality. In steel and iron sulfur content greater than 0.07%, is a waste. From the 11% blast furnace of sulfur ore; 3.5% limestone; 82.5% from coke, so coke is the main source of sulfur. The charge directly affects the coke into blast furnace of sulfur when the sulfur content of coke production. For more than 1.6%, 0.1% sulfur, each additional 1.8%, increase the amount of coke, an increase of 3.7%, ore blast volume added limestone to reduce the yield by 0.3%, sulfur content of 1.5 - 2% metallurgical coke requirements do not exceed 1% 0.7%., the sulfur content of metallurgical coke is less than - 0.4 large and medium sized blast furnace
- Q:What is the sample quantity of coke moisture test? What is the test time? How many degrees? That is the national standard.
- Methods for determination of moisture content of coke, a method of introduction of a certain quality of coke samples, placed in a drying box, drying at a certain temperature to a constant quality. Calculation of the percentage of water content in the mass loss of the coke sample. Two. Reagent color silica gel: industrial products
- Q:Coke and coal is one thing
- Not the same thing.Coal is often said of coal, including bituminous coal, lignite, anthracite, etc.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
the Metallurgical Coke of Size is 30 ---- 80 mm
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m.t.
- Supply Capability:
- 3000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products