Semi-conductive Non-woven Tape
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Application: Be used for binder and separating of cable core. Be used for bedding shielding under metal sheet.
Property | Unit | BDFD10 | BDFD15 | BDFD20 | BDFD25 | BDFD30 | BDFD35 | Test method |
Thickness | mm | 0.10±0.02 | 0.15±0.02 | 0.20±0.02 | 0.25±0.02 | 0.30±0.02 | 0.25±0.02 | ISO 9073-2 |
Weight | g/m2 | 40±10 | 50±10 | 60±10 | 70±10 | 80±10 | 90±10 | ISO 9073-1 |
Tensile Strength | N/cm | ≥30 | ≥30 | ≥35 | ≥40 | ≥45 | ≥50 | ISO 9073-3 |
Elongation | % | ≥12 | ≥12 | ≥12 | ≥12 | ≥12 | ≥12 | ISO 9073-3 |
Surface Resistance | Ω | ≤1000 | ≤1000 | ≤1000 | ≤1000 | ≤1000 | ≤1500 | Q/TF 2010 |
Volume Resistance | Ω.cm | <1×105 | <1×105 | <1×105 | <1×105 | <1×105 | <1×105 | IEC 216 |
Short term stability | ℃ | 230 | 230 | 230 | 230 | 230 | 230 | DIN 54345 |
Long term stability | ℃ | 90 | 90 | 90 | 90 | 90 | 90 | ISO 287 |
- Q:How much is a tin strap?
- Do not press the volume, sold by ton
- Q:What band is the most popular packing belt?
- Suggest you consult personnel inside course of study.
- Q:Production process of PP packing belt
- Finally, the embossing, stretching after the packaging belt, after two patterns of pressure roller, it will be pressed on the pattern, its role is to increase friction in use, do not slip, from the appearance of looking handsome.
- Q:Features of PP packing belt
- Suitable for all kinds of packaging machines in all walks of life (semi automatic, automatic and manual packing machine)
- Q:How much does it cost to open a PP strapping factory? Should the production and operation process of the PP belt factory be not difficult? I want to do.
- According to your present situation, you can consider first do low-grade core belt, sold to agents, do the amount to do high-grade, so that less investment, capital recycling faster, technical requirements are not very high. Machine investment in 50 thousand or so, but also need to buy PP materials, toner, packaging paper, paper core, stone powder, etc., there are 200 thousand can start. A line requires only 1-2 workers, each line of the daily output of about 1.5 tons. But the profit is not high, now the price is very transparent, each volume is only a few dollars profit, mainly to do large amount of money, I wish you success!
- Q:Semi automatic packing and full automata are used for packing and distinguishing
- Third, the difference between lift and lift is not a little; that is to say, if the semi automatic strapping belt receives 40 kilograms of tension, the new material can withstand 180-200 kilograms
- Q:Do you have your bags ready before boarding?
- Baggage checked, you can prepare your own packing belt, or packaged at the airport.Depending on the baggage, the choice is different. There are mainly the following situations:,1, if it is a handbag, the suitcase does not need to be packed, and the zipper can be zipped by itself;2, if it is the case, it is necessary to do a good job packaging, fragile to check when informed;3, if you do not pack, to pack at the airport, you need to charge 20 yuan fee;So, if you need to pack your own luggage, you can pack it in advance.
- Q:What is the reason why the packing belt breaks easily?
- For a long time, and do not pay attention to cleaning, resulting in packaging machine hot tongue on the dirt is too much, as long as sandpaper is used to rub off the stain on it;3, semi automatic packing automatic packing machine or the hot side, packaged hot melt zone is too small, the use of pliers correction;
- Q:Baling machine; packing belt; tightness adjustment
- The belt of the fully automatic baler is jammed and can not be used as a normal conveyor belt.1. remove the nuts associated with the stationary roller in sequence;2. it will be found that there are two special countersunk screws on the connecting shaft, because it is used for fixing the shaft mouth, so you need to turn the screw up;3., then you can remove the connecting shaft, check the tape stuck reasons, if there are foreign bodies can also be quickly cleared;4., in accordance with the original operation steps, and then re assembled fully automatic packaging machine, the main nut and curved plate to maintain a certain gap between. At least greater than the thickness of the bale used
- Q:Do you need a packing belt for the airport consignment bag?
- No, it's voluntary. If your bag is damaged or you can pack it for more insurance, I think it's unnecessary as long as your bag is good
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Semi-conductive Non-woven Tape
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords