Safety Glass Laminated Glass 6.38-17.52mm for Construction, Internal Decoration, Furniture
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
You Might Also Like
Safety Glass Laminated Glass 6.38-17.52mm for Construction, Internal Decoration, Furniture
Thickness:6.38-17.52mm
Size:Min. 300x300mm
Max. 2440(height)x7500(length)
Feature:
1.Laminated glass is a type of safety glass that holds together when shattered.
2.The interlayer keeps the layers of glass bonded even when broken, can produce
a characteristic "spider web" cracking pattern when the impact is not to complete-
ly piece the glass.
3.Much higher sound insulation rating.
4.Blocks 99% of incoming UV radiation.
Application:
Exterior storefronts / windows/ curtain wall / in the requiring hurricane-resistant
construction.
Furniture
Internal decoration: partitions / stairs / glass walls / balustrade. etc.
automobile windshields
- Q: I am looking for a nice closed back and plexi faced shot glass cabinet building plan I have seen them for sale but I can't seem to find the plans to make them.
- I think Sri Vidya Rajgopalan has given the correct answer. But the Answer is very long. Let me explain you in short. Ram built a Bridge instead of ship because he thought, if in the war with Ravana more army of Varana is required then it will be easy to bring reinforcement through a Bridge Than to send ship.
- Q: I wanted to build a glass ant farm but instead of using wood or plastic for the frame I wanted to use molding clay. Can I use the clay to build the frame to hold the two pieces of glass and to make a removable top or will it hurt my ants???
- Using plaster would be better than clay. Fired ceramic clay would also be fine, but that gets fairly complicated. If you use plaster it will be fairly easy, but you have to build a frame for your ant farm out of wood or use a suitably sized plastic or strong cardboard box. You could take a plastic box, put one plane of glass down. Use modeling clay to make the chambers for your ant farm. Make sure you connect them. Then mix plaster and cover everything so high you can still see your chambers. Put second pane of glass on it. After plaster has set, you should be able to remove one pane of glass, get out the modeling clay, then put the pane back on, you can use small clamps if necessary. Plaster is pretty good for an ant farm since it soaks up water. You don't want an ant farm to be absolutely dry, that isn't good for the ants. They need a certain humidity. Of course you don't want it really wet either, you'll have to observe the ants to see what they prefer. You can water the ant farm periodically or put one side into water so it soaks up some water. You also have to move the ants to a new ant farm once in a while, since the ant farm will become dirty. Make sure you feed the ants proteins and not just sugar. Make sure you have an ant queen. A good way to start an ant farm is to collect a queen if you see one outside. Since ants swarm, that is a good time to find a lot of queens. Make sure the queen doesn't have wings any more, only then she is mated.
- Q: Can anybody suggest some artist who work relate to building, especially glass building?
- Hunh? Repost this with more clarity. Are you talking about sculptors, painters, or something else? Are you talking about glass artists including sculptors or flat glass artists that do stained glass, fused, mosaic, or blasted/etched glass? Many artists do outside sculpture intended to work in relation with a building from landscape, roof, or courtyard.
- Q: Building glass foil company which is good?
- The constant film industry's glass film products cover high and low grades, regardless of customer's unique needs for insulation, safety, light transmission, privacy, price, etc., which can be met in the constant megasonic industry Architectural glass foil: thermal sunscreen, energy saving, safe explosion-proof, anti-ultraviolet, anti-glare glare, easy to create a private space, enhance visual effects. Our company also has a strict training by the manufacturers of professional paste team, can be attached to the plane, surface and spherical glass, glass doors and windows can be contracted, glass curtain wall, glass roof and other structures of the glass insulation energy-saving projects.
- Q: I am making a stained glass panel with a lighthouse in it and I want to put windows and doors in the lighthouse. Do I cut them out somehow or put something over the glass
- Traditionally,you're supposed to pick or create a design that won't have you trying to have pieces floating in the middle of another piece because it is difficult to cut a hole in the middle of a piece of glass, as you may have discovered. I have cut round holes in glass but it was regular window glass, not stained glass which can be a little trickier to cut. If you want to try cutting a round hole and then grind or chip it into a square shape, go ahead and try but be prepared for lots of spoiled pieces. Something else you could try, though, is a fairly new thing--glass paint which can be found at many craft stores or art supply shops. Pebeo is a popular brand. It can be painted on and left, which should work if the piece will always be indoors and you don't scrub it to clean it. There is a version of the same paint which can be painted on and then baked in a regular oven, and it's supposed to be dishwasher proof so should stay on very well. I have used some of this paint and it seems to do what they say it will, I'm still testing it for wear and don't have a dishwasher so can't really road test it. Painting on glass, such as you see in church windows, used to be quite impractical for the average glass artist since it needed a kiln in which to fire it on to the glass.
- Q: The basic characteristics of self cleaning glass
- Hydrophobe: refers to a substance (a molecule) that has a strong repellent effect on water, and water forms a large contact angle on the surface of a hydrophobic object. We have the same effect.
- Q: My new house all the glass without the 3C logo, is not unqualified?
- I told you about the popular ah: You can go to humiliate your property: First of all, 1750 * 1750 so big glass must be safe glass, the current practice is to strengthen the steel or steel Second, all the hollow windows are finished, not to the scene cut, there is no corresponding equipment such as butyl rubber machine, two-component plastic machine, the production line (this can not, but the effect is very poor pressure , A direct result of watertight and air tightness) is not made of hollow glass, Then, the tempered glass is not cut Finally, the insulating glass, tempered glass can be safe glass, but the safety of glass not only two of them, the current safety glass is mainly steel and plastic, and then use them to synthesize hollow, In summary, you can certainly say that your home windows are not in accordance with the requirements of the installation of the corresponding glass, this is in the affirmative.
- Q: What is Article 20 of the Regulations on Safety Management of Building Glass?
- Four of the "building safety glass management regulations" (development and operation [2003] 2116) only 14, is not the twelfth ah? Article 12 Penalties ??(1) The safety glass production enterprise shall bear the corresponding legal responsibility for the serious economic loss or personal injury or death caused by the quality of the safety glass itself. The quality supervision department shall supervise and inspect the quality of its products and, if it fails to meet the quality requirements, It shall impose penalties on it, and the compulsory certification body shall revoke its certification certificate in accordance with the relevant provisions. According to the relevant provisions of the punishment, the certification body should bear the relevant legal responsibility. ??(2) The sales unit shall bear the corresponding legal responsibility for the unit that sells the unqualified safety glass in violation of these Provisions and the major economic loss or personal injury or death caused by the products it sells. ??(3) Any trade contract involving the import of unqualified safety glass in violation of these Provisions shall be subject to corresponding legal liability for causing significant losses or personal injury or death caused by the imported products. ??(4) The construction, design, construction and supervision units that violate these Provisions shall be punished by the construction administrative department in accordance with the relevant provisions. The unit that sells the unqualified safety glass in violation of the provisions shall be investigated and dealt with by the administrative department for industry and commerce according to law.
- Q: The general specification is to ask the length and width of the glass at the time of shipment and the length of the cut, the number of cuts, and the method. In the question of whether the two companies in the data of the two materials can be provided? Behind can be chase points.
- Each series are different, there are 55 series, 50 series, 65 series, 80 series, these series are how to divide it, see the following figure: is broken bridge profile to set the width, 55 refers to 5.5cm, 65 refers to 6.5cm, and so on. Different widths, different prices 55 series 2, the hollow thickness is determined by the profile, the wider the profile, the greater the thickness of the hollow can be achieved. This four, there are three to do 55 series of profiles, one said to be able to do 15mm hollow, but there are two that do not recommend doing, they do not do that home do not do 55 series of businesses do 65 series, but They do not do 15mm hollow, only 12mm hollow. (5 +) + 15 + (5 +) of the window, as shown in the following picture on both sides of the glass has no space to use, only can only be used to do the same Side of the use of pressure, the other side of the fight black glass glue, this can do, but the result is to play black glass glue has a great drawback, that is much worse durability, a long time after the black rubber may fail, so I personally strongly recommended We do not use 55 series profiles to do (5 +) + 15 + (5 +) window, I personally guess that the *** home window is marked with vinyl, rather than the use of pressure on the pressure. As for everyone really want to do thick hollow, you can use the 80 series of broken bridge aluminum, but the price is very expensive Oh. 3, broken bridge aluminum thickness is not necessarily fixed, the amount of the thickness of the four, the thinnest some less than 1.2mm, but we all know that they should be more professional business, usually broken bridge aluminum thickness of 1.4 ~ 1.5mm. Broken pipe aluminum thickness uniformity is acceptable 4, for everyone to look at the import of steel profiles it, it is Shide no way than ah, look inside the steel lining, but the price is quite good, with the broken bridge aluminum prices are similar, there is a price than broken bridge aluminum Still high
- Q: I would like to build my own, customized aquarium and I have recently found out that float glass would be the best glass to use for it.I want the tank to be pretty long, considering i am turning it into a vivarium for my turtle.I need to know how much it will cost me to buy the sheets of float glass? or If I can just use regular glass for this instead?I am looking for something inexpensive, but with the quality also.thanks for the help :)
- I have only once heard this term (float glass) used before. That was at the Wheaton Arts Museum which was a glass center in the 19th century. The docent was explaining how the molten glass was poured over a layer of molten tin to make flat sheets for window pane. It's commonly called plate glass. Quite frankly you can get a much better answer by calling a glass shop and giving the dimensions. They will give you a quote. But I hazard to say that it will be cheaper to simply buy an aquarium tank. You should note however that if you do build this tank and ever think about filling it with water you really need to consider the stress on the glass. Long panels will collapse under the pressure unless they are very thick or reinforced. You will find reinforcements on the tops of commercial aquariums with long sides. I know a guy who cut the plastic reinforcement because it got in the way of the filter and it didn't collapse until he got it completely set up fish and all.
Send your message to us
Safety Glass Laminated Glass 6.38-17.52mm for Construction, Internal Decoration, Furniture
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
Similar products
Hot products
Hot Searches
Related keywords
