S826H Road Roller Buy S822C Road Roller at Okorder
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 300 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Name: S826H Road Roller
Parameter:
Item | Unit | S826C |
Operation weight | kg | 26000 |
Load on front drum | kg | 17000 |
Load on rear wheels | kg | 9000 |
Drum width | mm | 2130 |
Static linear load | N/cm | 784 |
Vibration frequency(Low/High) | Hz | 27/32 |
Nominal amplitude(High/Low) | mm | 1.9/0.95 |
Excitation force(High/Low) | KN | 410/300 |
Travel speed | km/h | 0~10 |
Steering angle | ° | ±33 |
Swing angle | ° | ±10 |
Theoretical gradeability | % | 50 |
Min. external turning radius | mm | 7180 |
Engine model | DEUTZ BF6M1013EC | |
Engine power | kw | 160 |
Rated engine speed | r/min | 2200 |
Engine oil consumption | g/kW.h | 228 |
Hydraulic oil tank capacity | L | 290 |
Fuel tank capacity | L | 290 |
Advantages:
state-owned company
fortune 500 company
AAcustom
Why choose us?
1 sincre
CNBM International is a state company, now is one of the largest state-owned group cooperation in China! All the equipment such as tower cranes, produced by CNBM are compliant with the national level quality.
2 professional
Our engineers will at your services 24hours to solve all your tower crane installation and other questions. Our goal is to provide the best professional services.
3 quality
CNBM International’s tower crane have strict quality control, only the best quality products can pass the test.
4speed
We have professional sales team to guarantee your reply within 12hours to save your precious time.
5 After sales
If the tower crane has any problems, we will solve your problems in first time.
Inquies FAQ
My dearest friend, if you want to buy our tower cranes, please tell us the following parameters. And we will make the most suitable project for!
1. Building height or tower crane working height.
2. Max load capacity and tip load capacity.
3. Span or jib length
4. Other Special requirements
- Q: Shaanxi impact roller manufacturers which scale is relatively large?
- China Railway twenty bureau! Zhengzhou airlines, Zhengzhou hawei!The development and application of impact roller compaction technology, accelerate the development of geotechnical engineering, provides a new way to solve the problem of roadbed quality problems, such as effectively reduce the roadbed settlement after construction, ensure the overall stability of the embankment; compaction of subgrade roadbed, Lu Dijin for inspection of the additional impact rolling times.
- Q: How many tons are there in the maximum roller?
- There are more than 30 heavy duty roller rollers, such as XP302.Press machine road normally rolling efficiency and the compaction effect is proportional to its mass, so for higher grade, compaction material is complicated and the construction cycle is short of the road should be considered roller of large tonnage, construction equipment and large tonnage roller is the construction unit of the project bidding must be available, so in general should consider buying weight above 14T, the exciting force of more than 260kN wheel drive single drum vibratory roller. But it is not the exciting force of the bigger the better, because the exciting force will lead to segregation of surface layer, loose aggregate crushing and grading materials, not only reduce the compaction quality, but also can cause premature fatigue of drivers and machine parts damage, experience has shown that effective excitation maximum should not exceed 400kN.
- Q: Is there eighty tons of vibration in the vibration of the eighteen ton roller?
- If you need further communication can contact Foshan Hao Chen engineering machinery limited company, can be found online.
- Q: How big is the 20 ton bottle?
- 20 tons of roller storage battery should be 2 12V120A, and I hope to be helpful to you.
- Q: At the construction site, should the scraper, dump truck and roller be equipped with sprinkler?
- Desired... First, it's cheaper.. Or because the construction will cause a lot of dust?.. Use a sprinkler to reduce dust
- Q: Roller clutch does not move, hang not into gear, what is the problem?
- Should be the electronic control gear bar, the pressure is not enough, or power cylinder problems, clutch failure in place, the control sensor will not give the gear signal, of course, can not hang professional roller
- Q: 31 How about roller?
- Accessories is certainly the most matching, performance is the most fit, the price is not cheap. Substitute to a certain extent in accordance with the requirements, but do you know whether some implicit indicators can match you? Do not have the manufacturer's specialty? So there is no best product, only the most suitable for your products. According to your needs!
- Q: Working principle of vibratory pump and vibrating motor
- The motor drives the gear pump of the hydraulic oil circulation, and then to the vibrator here, the hydraulic oil circulating through the hydraulic gear into rotary force (hydraulic motor, and the motor is also popular that a truth, only substation, power transformation) let you through a transmission shaft.
- Q: How is the tonnage of the roller machine calculated? Forget to know the answer! Thank you
- Each manufacturer's parameters are not the same, about 500kN, small vibration in about 250. The tonnage of a roller means its total weight, allowing a 3% error.
- Q: How about roller Qingdao kotai heavy industry.
- Good, the price advantage, and other brands also have a function, but as long as it is mechanical or any other products, there are some deficiencies, it can not be perfect. If you want to use it or choose Qingdao Ketai, there are certain advantages at least economic cost
Send your message to us
S826H Road Roller Buy S822C Road Roller at Okorder
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 300 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords