Q:Stainless steel and PVC board can paste no

Of course Now a lot of doors are made of stainless steel and external PVC board

Q:How heavy the pvc board hangs on the wall

Pvc board weight is not too large, and only 0.6 square, can be used glass glue pvc board paste to the false wall. First in the pvc board around the diagonal and make a long glass of plastic, and then posted on the wall, surrounded by millet nails or clip fixed, two days after the glass gel dry remove the millet nails or clips can be. Later want to remove the pvc board painting, just use a small blade gently open the viscose of the hole, you can peel down, the wall of the remaining glass glue can also be stripped directly. Are you satisfied with the above?

Q:Copper will cost too much and I don't have the flex room for pex so I can't use those. Can I use just PVC for my entire house? Both cold and hot water?I'm putting it in the ceiling if that makes a difference?

You can use CPVC throughout however it's typically used just for hot water. PVC is suitable for cold water only and isn't designed for hot. I'll concur and recommend PEX Shark Bite, even though the cost is higher than CPVC. If you can install rigid plastic pipe you can use PEX. It's up to you and your budget.

Q:What is the PVC board and KT board, what are the specific role?

PVC board is PVC as raw material made of cross-section for the honeycomb mesh structure of the plate. Is a vacuum plastic film, used for all kinds of panel surface packaging, it is also known as decorative film, with film, used in building materials, packaging, medicine and many other industries. Which accounted for the largest proportion of building materials industry, 60%, followed by the packaging industry, there are several other small-scale application of the industry. According to the degree of soft and hard can be divided into soft PVC and hard PVC. According to the production process can be divided into PVC crust foam board and PVC free foam board.

Q:PVC crust foam surface can brush latex paint?

Water-based latex paint on the PVC foam board no adhesion, if you do not ask strict, a small area of the best spray paint, the PVC foam board grinding and then spray will be better, if it is to do the list of orders such as display panels, PVC Bathroom cabinet painting, the best use of special paint. My company is doing this PVC foam board paint, excellent adhesion, good water resistance, will not fall off the bubble.

Q:PVC wood-plastic board Saw cut out of the board is not rectangular, sometimes parallelogram is sometimes how to adjust the trapezoid

, the preferred work before, will push the table around the cleaning and cleaning table. 2, check whether the sharp blade, the size of the blade is in a line 3, the test machine: time about 1 minute to see whether the normal operation of the machine, check the size of the blade rotation direction, to ensure that the blade rotation direction is correct. 4, start work, will prepare the plate on the push bed, adjust the stall size. Then start working. 5, to maintain the PVC wood-plastic plate placed straight, no bending plate, 6, the plate should be close to the block, can not move; 7, according to the thickness and hardness of the plate to adjust the opening speed, the machine will be advancing uniform, not too fast too fast. 8, such as out of the board corner is defective, should consider replacing the saw blade. 9, open a small material, the application of wood to push forward.

Q:PV board, PVC board material properties

If you refer to the polymer chemical industry. I have not heard of PV, is polyvinyl alcohol? If so, this material is not suitable for high physical properties of the material, because I remember it in the MSDS described in the air heated to above 100 ℃ slowly discoloration, brittle. Heated to 160 ~ 170 ℃ dehydration etherification, loss of solubility, heated to 200 ℃ began to break down. More than 250 ° C into a polymer containing conjugated double bonds, is a water-soluble polymer material, widely used in low viscosity glue, but also the use of fiber vinylon. PVC, then, that is, polyvinyl chloride, very common, uh. Chemical stability, it can be used for the production of anti-corrosion pipes, pipe fittings, oil pipeline, centrifugal pumps and blowers. Polyvinyl chloride board is widely used in the chemical industry to produce a variety of storage tank lining, building corrugated board, doors and windows structure, wall ornaments and other building materials. Because of electrical insulation performance, in the electrical, electronics industry, for the manufacture of plugs, sockets, switches and cables. In daily life, PVC is used in the manufacture of sandals, raincoats, toys and artificial leather ~ we now use PVC pipe, because the iron pipe is easy in the winter by the risk of ice, but if you use the plastic belt or Plastic film is PVC material, do not use Oh, PVC production of stabilizers are added to the highly toxic chemicals, u just just talk about the landlord would like to know more about the knowledge, then I can explain

Q:How to quickly tear off the protective film on the PVC board

Heated with a hair dryer

Q:VC plastic buckle the corners of the corners is how fixed to the wall of the buckle is how and cords connected to the light steel keel and gypsum do cut off the light steel keel is how and the wall ...

Light steel keel sub-station dragon and Wolong. Wolong before the installation of the first hammer with a hammer, playing wooden needle, and Wolong fixed, and then install the station dragon, and clamp with a good fit.

Q:Who has pvc foam board performance indicators ah?

There is no standard how good, we set the standard ah, what is what it is.