-18 to -20 C
|Place of Origin: |
Shanghai China (Mainland)
|Brand Name: |
|Model Number: |
380V/3P/50Hz or 220V/1P/50Hz
Up to 100KW
Up to you
Up to different models
|After-sales Service Provided: |
No overseas service provided
2~300 cubit meters
|Temp range: |
|PU panels cover: |
Steel, stainless steel
|Pu panels: |
75, 100, 120, 150mm
|Standard air cooler: |
Using SS cover
|Expansino value: |
|Compressor brand: |
Bitzer, Copeland, Tecumseh
Packaging & Delivery
|Packaging Detail:||Plywood case, 100% safe.|
|Delivery Detail:||15 days|
cold room panel
1. With refrigeration unit
2. MOQ:1 set 7 days ready
3) Volume: up to you
- Q:Is it ok in the decoration? What are the materials used in general?
- If it is their own use, it is recommended or preferred solid wood furniture, followed by plate furniture.
Solid wood furniture is the best, environmentally friendly and durable, but the price is slightly higher, plate furniture style, cheap, as long as the choice of attention to its environmental indicators are in line with national standards, and now the use of MDF board, Plant fiber as raw material, the application of urea-formaldehyde resin or other suitable adhesive made of artificial plate.
According to the amount of different, divided into high density board, MDF, low density board. MDF due to soft impact resistance, but also easy to re-processing, is the production of a good material furniture.
Melamine board, full name is melamine impregnated film paper facing wood-based panel. It is with different colors or textures of paper into the melamine resin adhesive immersion, and then dried to a certain degree of curing, will be paved in the particleboard, medium density fiberboard or hard fiber board surface, made by hot Decorative plates. Used for office furniture or kitchen furniture.
- Q:What is the NALC board?
- Q:How to calculate the square of the cabinet plate
- Is it not your cabinet High: 1200 Width: 750 Depth: 480? The cabinet you have to open. There are two side panels, a roof a floor, a backplane, but you have to know there is no solid and activities Plywood.
According to your size: 1.2 * 0.48 * 2 = 1.152
0.75 * 0.48 = 0.72
1.2 * 0.75 = 0.9
Probably square: 2.78. Just a mao count, there is a board where I have not subtracted.
- Q:How about Tiantuo plate
- How to buy plate
(1) whether it is environmentally friendly. According to the provisions of the indoor building materials formaldehyde emission must be less than or equal to 1.5mg / l, if more than 5mg / l is exceeded.
(2) wood moisture content. When the wood moisture content is higher than the equilibrium moisture content of the environment, the wood will dry shrink, otherwise it will absorb moisture expansion. The main cause of wood cracking and deformation is that the moisture content is too high or too low.
(3) Do not just cheap. Low-priced materials are usually sold and crushed and formaldehyde seriously exceeded the material, should be to the regular market to buy, it is best to buy a brand of materials.
(4) the purchase of wood flooring when the tree species do not have to worry about the name, the election is the most important dealer.
- Q:PCB board which expensive?
- Health is the high-end PCB of the special sheet, of course, is the most expensive benefits
- Q:On the difference between Q235 and Q345 plate and use
- Q235 steel is an ordinary carbon structural steel, that the old A3 steel its yield point is 235MPa, tensile strength of 375-500MPa. General use more.
Q345 steel is a low-alloy high-strength structural steel, including 16Mn, 12MnV, 14MnNb, 18Nb, 16MnRe, including a class of steel, the yield point of 345MPa, tensile strength of 470-630MPa. Ordinary quality of low alloy steel.
- Q:Is the epoxy sheet toxic?
- To see how you use, if you are planning to eat epoxy resin sheet, then it must be toxic, this is certainly not food, not digestion, and chemical products out, certainly not a good disinfection;
Life, there is a built-in epoxy resin pipe (transport of drinking water), so the specific treatment of epoxy resin should be non-toxic;
But it is certain that the ordinary epoxy resin sheet is certainly not subject to special treatment, is strictly prohibited
- Q:What does the plate open?
- Sheet material is based on their own use of the drawings size, the large plate into a process to meet their own size.
- Q:What is the difference between steel sheet and coil?
- Coil is the factory roll because the length is long to roll up with C said, such as: 2.75 * 1500 * C
Tablet is the factory in the hot-rolled production line before the cutting plate stability of the specifications cut into a board, such as: 2.75 * 1500 * 6000
- Q:How to degrease the wood
- Vacuum drying method
The vacuum drying method is a method in which wood is piled up in a closed container and dried at a lower pressure than atmospheric pressure to remove part of the resin, and vacuum drying is suitable for wood having good air permeability. Vacuum drying method, can not achieve the desired effect. Vacuum drying is mainly characterized by drying faster than other methods, compared with other drying methods, drying time can be shortened about 25 ~ 1 2. Japan's Naito Truth  Drying of Douglas fir wood by high-frequency vacuum drying is considered to be effective for degreasing and mainly in the early stages of drying, since the moisture removal in the wood is in the early stages of drying, so its degreasing action is also in the early stages of drying. ] And other larch wood for cooking, vacuum and artificial drying, that cooking, vacuum degreasing effect is good, because the cooking to increase the permeability of wood.If the cooking, vacuum drying after artificial drying degreasing effect is better, because the vacuum drying Shorten the drying time.But the vacuum drying equipment is complex, the investment is high, there are vacuum drying machine manufacturers can use this method.To generally improve the degreasing effect, often using two or more degreasing method combination, such as Liquid immersion plus steam drying, pharmacy impregnation vacuum, steam vacuum pressure vacuum and other methods. The manufacturer can be based on the actual situation of the factory, choose the appropriate method for their own.
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range