Plastic Tubes PVC Pipe Water Pipe Network System, Specification:16-630mm, Length:5.8/11.8m, Standard:GB
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 m
- Supply Capability:
- 9999 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Specifications
pvc pipe for water drainage
1)Specification of pvc pipe:40mm-400mm
2)Thickness of pvc pipe:1.2mm-7.0mm
3)ISO certified.
2.Properties of pvc pipes:
1) Material: pvc pipe unplasticized polyvinyl chloride
2) Standard: GB, ISO9001, ISO14001
3) Color: white pvc pipe, grey pvc pipe , etc.
4) Specific Gravity, g/cm3, 20(C): 1.35 - 1.55
5) Vicat Softening Temperature, (C) >=79
6) Longitudinal Reversion, %, 150(C) <=5< span="">
7) Dichloromethane Resistance Test: No attack
8) Falling Weight Impact Test, TIR, %, 0(C) <=10< span="">
9) Tensile Yield Strength, Mpa >=40
10) Fitness of Water Tightness Test: No Leakage
11) Fitness of Air Tightness Test: No Leakage
3.Features of pvc pipes :
1) Light weight, easy to load and unload: PVC pipe is very light, convenient to handle loading unloading, and installing.
2) Good chemicals and drugs resistance: PVC pipe has its excellent resistance to the erosion caused by acids and alkalines, a great help to the chemical industries.
3) Small resistance to fluidity: The smooth surface reduces resistance to the fluids. Its roughness coefficient is only 0.009, much less than other pipes, Under same discharges, smaller cabibre of the pipe can be uesd.
4) Strong mechanical strength: Good resistance to water pressure, outside impact and pressure, is satisfied under any conditions.
5) Good electrical insulation: excellent insulation nature against electricity. the pvc pipe can be served as conduits and pipes in construction cable and wire.
6) Water quality unaffected: The solution tests on the PVC pipe show no affect on water quality when the water flows through is. It is considered the best piping material for running water works.
7) Simple installation: Very easy to connect, thus much time and laborcost may be saved.
4.Application of pvc pipes:
1) Structure Engineering, home water supply and drainage
2) Water drainage/supply system
3) for Agriculture Irrigation, aquaculture
5.Specifications of the pvc pipe:
Outer Diameter (mm) | Wall thickness(mm) | ||||||||
2.5MPA | 2.0MPA | 1.6MPA | 1.25MPA | 1.0MPA | 0.8MPA | 0.63MPA | |||
φ20 | 20*2.3 | 20*2.0 | |||||||
φ25 | 25*2.8 | 25*2.3 | 25*2.0 | ||||||
Φ32 | 32*3.6 | 32*2.9 | 32*2.4 | 32*2.0 | |||||
Φ40 | 40*4.5 | 40*3.7 | 40*3.0 | 40*2.4 | 40*2.0 | ||||
Φ50 | 50*5.6 | 50*4.6 | 50*3.7 | 50*3.0 | 50*2.4 | 50*2.0 | |||
Φ63 | 63*7.1 | 63*5.8 | 63*4.7 | 63*3.8 | 63*3.0 | 63*2.5 | 63*2.0 | ||
Φ75 | 75*8.4 | 75*6.9 | 75*5.6 | 75*4.5 | 75*3.6 | 75*2.9 | 75*2.3 | ||
Φ90 | 90*10.1 | 90*8.2 | 90*6.7 | 90*5.4 | 90*4.3 | 90*3.5 | 90*2.8 | ||
Φ110 | 110*10.0 | 110*8.1 | 110*6.6 | 110*5.3 | 110*4.2 | 110*3.4 | 110*2.7 | ||
Φ125 | 125*11.4 | 125*9.2 | 125*7.4 | 125*6.0 | 125*4.8 | 125*3.9 | 125*3.1 | ||
Φ140 | 140*12.7 | 140*10.3 | 140*8.3 | 140*6.7 | 140*5.4 | 140*4.3 | 140*3.5 | ||
Φ160 | 160*14.6 | 160*11.8 | 160*9.5 | 160*7.7 | 160*6.2 | 160*4.9 | 160*4.0 | ||
Φ180 | 180*16.4 | 180*13.3 | 180*10.7 | 180*8.6 | 180*6.9 | 180*5.5 | 180*4.4 | ||
Φ200 | 200*18.2 | 200*14.7 | 200*11.9 | 200*9.6 | 200*7.7 | 200*6.2 | 200*4.9 | ||
Φ250 | 250*11.9 | 250*9.6 | 250*7.7 | 250*6.2 | |||||
Φ315 | 315*15.0 | 315*12.1 | 315*9.7 | 315*7.7 | |||||
Φ400 | 400*19.6 | 400*15.3 | 400*12.3 | 400*9.8 | |||||
6.FAQ
Q:What is you MOQ?
A:As customer’s request.
Q:What is the production ability? or delivery time?
A:Our production ability support 40HQ order finish in one week.
Q:What is the regular shipping port?
A:Tianjin or Shanghai.
Q:What is your payment?
A:TT or CC.
Q:Can we have sample?
A:Sample free, freight cost you.
Q:For urgently doubts,who online?
A:Sales and marketing Manager 24hours online service.
- Q: i have 200$ to spend i am 90 lbs and 4 foot 11 inches. I want to know what i should get-- this float tube
- Rubber/plastic/canvas tubes are flexible. They can be deflated. Pontoons are usually made of rigid materials. Either will do. I suggest you check the area in which you want to fish and see what are being used. Bottom., current, wind are all factors to influence performance of such craft.
- Q: Plastic tube how to link three links?
- You can do it yourself. Remember, in the pipe connection, the best combination of the use of fine shar slightly hit point, glue after 12 hours don't try.
- Q: I use a length of plastic tubing and after using it for a while (few months) it changed from clear to opaque. It had been exposed to heat, alcohol and water, nothing else. If you know why it changed colors please fill me in. Also, I would like to know if it is changed chemically that might effect things traveling through it or if it is merely a cosmetic change and I can ignore it for the most part.
- If the plastic tubing was exposed to heat, then the resultant color change was most like due to a disruption in the chemical lattice of the plastic. A plastic is basically a polymer or group of polymers (polymer=same chemical compound repeated over and over again). When heat or another energy source is apllied, it has the ability to alter the polymer structure. Think of a polymer in similar terms as a crystal; all of the compounds in the plastic will align themselves in a similar way as the previous compound. When you do this with minerals, you end up with a clear or partially clear crystal. The same basic principal applies to polymers (plastics). Hope this helps!! P.S. some chemicals have the same ability to alter the plastic, same as an enrgy source..
- Q: i finally bought a new faucet, and changed it. it seems that there is no more leaking from the faucet.but now, it seems that there is some water leaking right under that white plastic screw. around the plastic looking tube. inside of it, there is a dark rubber kind of ring around it. i can't take out the white plastic screw (i don't know the those special names.) otherwise, i will just put some plastic tape, and seal it. that shouldn't be so hard. so my question is 1. what do you recommend? should i buy a new tube? or is there any other way to fix this thing?extra question.2. the new faucet has the top iron thing and a black plastic base. i put the plumb's putty on the edge of top and bottom of the black plastic base. i am thinking what if there are some water leaking inside of the faucet, if i sealed the whole plastic base, the water will accumulate inside of it. did i do the right thing at all?
- Looks like the plastic connector has a duff washer in it. It will keep weeping and its annoying. PTFE plastic tape may assist but to be fair id do this: Remove the tube and make sure the threaded brass tail of the tap is flat and smooth wioth no burrs. Second, make sure the threads on the tube arent frayed or have been cross threaded so it goes on slightly crooked. third, make sure the black rubber washer in the tube connector end isnt twisted, split or slipping inside the tail when tightened up fully (common with some makes) fourth, make sure you havent overtightened it, this can cause the above. fifth, where the white plastic braded tube meets the shiny metal crimp section (before the white plasic) it can sometimes fail. Manufaturing fault but not uncommon. Done worry about your question 2. Its 99% question 1. Plumbing and heating engineer for 12 years - a little tip - if you have to force it, your probably doing it wrong. Its a good motto for plumbing.... and in life!!! Yeah baby! Good luck
- Q: Are plastic tubes suitable for shipping and transportation?
- Yes, plastic tubes are suitable for shipping and transportation. They are lightweight, durable, and can provide protection to the contents inside. Additionally, plastic tubes are resistant to moisture and can be easily sealed to prevent any damage during transit.
- Q: I have the heads for the cake decors, but I dont have the tube I think thats what you call it. Could I just use a plastic sandwich bag and tie it on with rubber bands. Will this work? or will it just make a mess? Thank you.
- I think you mean a pastry bag... the tubes are the extensions that make the shape. If you don't have a pastry bag, use parchment paper. Just fold it into a cone and fold the top inside the cone so it doesn't open up. Shove the tube inside and you got a disposable pastry bag. Pour contents into the cone using a spoon and twist the bag closed. Make sure it's closed well so contents don't spill outside. You can fold it to any size, big or small, to pipe large objects or small fine detail.
- Q: Are plastic tubes fire resistant?
- No, plastic tubes are generally not fire resistant.
- Q: At night my hamster wakes up and plays and stuff, well he has these plastic tubes that he can climb up to get to different areas of his cage, he likes to chew on them. My only problem is that it is REALLY loud and I hate the scraping sound it makes. I don't want to take out the tubes because then he would have nothing to play in. And I don't have the money to get him a new cage/glass aquarium and I really would like him to stay with the cage he has now, it's an all plastic cage except the metal bars to keep him in,lol, the brand is Super Pet Critter Trail if you want to loo it up to see what I'm talking about. Me and my mom have tried rubbing lemon juice on it but he liked the taste -.- please help?
- You can get this stuff called bitter apple spray that tastes bad but won't hurt them. Some pet stores have some for small animals, but the dog stuff is really the same thing so if that's all you can find, go for it. It's usually in the dog remedy aisle (with vitamins, hip meds, etc.) Do what the first person said and put it on a cotton ball and wipe it on the bars/plastic. And I agree with what someone else said, maybe he likes to chew on plastic. I don't think any plastic is okay for them to ingest, but then again maybe they're not ingesting it. I work at a pet store and all of our small animals chew up their plastic igloos like crazy, and none have died from digestive/stomach problems. So maybe try one of those? One the right size for a dwarf hamster is like $3-$4. You could try giving him a Nylabone or a Greenies dog treat, those both have a plastic-like texture. If you get a Nylabone I think i'd steer away from the meat-flavored ones. Also, what kind of food are you feeding him? If it's the seed-based kind, maybe if you fed him lab blocks he'd get some of the gnawing out of his system that way. Good luck!
- Q: Are plastic tubes suitable for packaging beauty or skincare products?
- Yes, plastic tubes are suitable for packaging beauty or skincare products. They are lightweight, durable, and offer protection against moisture and contamination. Additionally, plastic tubes are convenient for dispensing the desired amount of product and can be easily customized with labels or printing to enhance branding.
- Q: Are plastic tubes suitable for hot-fill applications?
- Plastic tubes are generally not suitable for hot-fill applications due to their low heat resistance.
Send your message to us
Plastic Tubes PVC Pipe Water Pipe Network System, Specification:16-630mm, Length:5.8/11.8m, Standard:GB
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 m
- Supply Capability:
- 9999 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
