Plain Aluminium Foil For Industrial Application
- Loading Port:
- China main port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 6 m.t.
- Supply Capability:
- 5000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
The description of Aluminium Foil:
Application: mainly used for Industrial application, like thermal insulation application, roofing and floor application etc
Alloy: 1235 / 8011 / 8079
Temper: O
Thickness & tolerance: 0.01 - 0.2 mm (+/- 6%)
Width & tolerance: 200 - 1650 mm (+/- 1mm)
Mechanical properties: Tensile strength (U.T.S)≥40 Mpa, Elongation≥1%
Standard: GB/T 3198 / ASTM - B209 / EN 546
Packaging: Suspending packaging which strong enough for ocean freight transfer
Pop-Up Foil Sheets are individual sheets of Aluminum Foil. Wrappers are so easy to use with all your foods because they pop up one-at-a-time and require no cutting or tearing! Use them for wrapping food to go, as portable place mats, wrapping sandwiches, protecting counters during meal preparation, when making snacks or to store food in the refrigerator.
The Main Features of Aluminium Foil:
High quality with competive prices.
Wide product range of choice.
We are specific manufacture and control.
The Images of Aluminium Foil:
FAQ:
Q: Can you provide free samples?
A: Yes, free samples will be sent to you on freight at destination.
Q: Can I get your latest catalogue?
A: Yes, it will be sent to you in no time.
Q: What is the MOQ?
A: 5 tons
Q: What are your payment terms?
A: We accept L/C,T/T, West Union,etc.
- Q:Development prospect of aluminium foil
- Introduction of several key aluminium foil products(I) air conditioning foilThe air conditioner foil is a special material for the heat exchanger fin of an air conditioner, and an early air conditioner foil is a plain foil. In order to improve the surface properties of the plain foil, an anticorrosive inorganic coating and a hydrophilic organic coating are applied before forming to form hydrophilic foil. Hydrophilic foil accounts for 50% of the total amount of air conditioning foil, and its use ratio will be further improved. There is also a hydrophobic foil, so that the fin surface has hydrophobic function, prevent condensation water adhesion. Because of the hydrophobic foil, the technology of improving surface defrosting needs to be studied further, and the actual production is very little.The thickness of the air conditioner foil is 0.1mm to 0.15mm. With the development of technology, air-conditioning foil has further thinning trend, Japan's leading product thickness of 0.09mm. In the thin state, aluminium foil to have excellent formability, microstructure and mechanical properties of metallurgical defects must be uniform, less small anisotropy, and high strength, good ductility, uniform thickness, good flatness. Air conditioning foil specifications and alloy is relatively single, suitable for mass production, but its market season is strong, for air-conditioning foil professional manufacturers, it is difficult to solve the peak season demand and off-season demand almost no contradiction.Due to strong market demand, in recent years, China's air-conditioning foil production capacity and technology level unceasing enhancement, has formed a large and small, high and low production of air foil enterprise group, some large enterprises such as China aluminum, Bohai aluminum products quality has reached the international advanced level. Because of the excessive domestic production capacity, the market competition is extremely fierce.
- Q:I got a highlighting kit and it has one of those pull-through caps but I find it way too difficult to work withCould I just discard the cap and use the creme without the cap?
- As with maximum baked products, a week or 2 is severe-high quality, even however, remember additionally the atmosphere: Is there countless heat temperature? Humidity? dirt? puppy fur? Rugrats with who-knows of-the place-they have-been arms? Do because of the fact the smart men of Bethlehem did whilst they presented their products: deliver 2 of the full factor! which potential, if one gets lost or breaks ok risky humorous tale! heavily, besides the incontrovertible fact that, make 2: One in enhance for demonstrate (throw out jointly as you unload the different decorations)Make the different for munching an afternoon or 2 upfront; once you haven't got room in the 'refrigerator, then wrap it intently and LOOSELY in plastic wrap, and positioned it in a cool, dry place (a closed closet shelf is nice); basically do no longer forget approximately approximately it!!!
- Q:What diameter must a copper wire have if its resistance is to be the same as that of an equal length of aluminum wire with diameter 3.26mm?
- It is very common in older homes to have tin coated copper wiring which many people then think they have aluminum wiring. If you have a piece of the older wiring or can turn the breaker off to one of these wires use a screw driver to scrape at the wire on the bare end; if it's tin coated copper you will see the orange/rust color of copper after a few light scrapes, the scaping is nothing agressive. This will determine if you have aluminum or not. Someone else mentioned about a loose connection which if a copper wire aluminum wire are connected together it would very likely fail creating a short. The two different materials expand contract at different rates which creates a bad connection. There is a special crimp process that can be done to join the two but a electrician should definately do this. A lot of the older homes just have two many items all on one breaker. With what you've described I would suggest using a electrician. Additional: If no breakers are tripped off and you do not have power in some areas you might have another panel (sub-panel) somewhere else in the home OR this circuit is hooked up to a GFI outlet somewhere else such as the kitchen, bathroom or garage. I would physically re-check each breaker and then hunt for a GFI outlet and sub-panel.
- Q:Ok my mom wants to make an Eye round roast but we no longer have a crock pot (we just moved).Is there any other way that we could possibly cook it?Any advice is welcome!Thanks in advance!
- No, but since mirrors are normally coated with with a metallic surface to produce the reflection it could be conceivable that if the wireless devices were on opposite sides of it that it could interfere with the connection by blocking the radio waves.
- Q:go in soujouk.
- A cookie sheet would be best because when you try to move the pan it may shift, being weakit's perfectly ok to go into the oven but would be more stable with assistance.
- Q:I want it to be quick and easy and tasty but healthy.Thanks
- Go to your local GNC, gym, or health market; they should have a wide selection.
- Q:At my school, we are having a bazaarI need items I can make really quick and a lot of that people wantIf there are any, please put instructions and maybe even a description? I need lots of items to trade and there might be some really cool stuff I want! They have to be like DIY or whatever.
- I just made some miniature bowls out of CDsIt is very easy and I will put the link to the instructions in the source box Basically, you turn on the oven to 325, and put the CD over a form like a small glass (the instructions I got were to use a ball of aluminum foil, but that did not work well for me; I used a small glass instead)You won't get much useful from a ball of aluminum foil, and I wanted mine to look like a bowlDo a test one first; when you get it right, you could bake several at one timeAfterwards they can be decorated if you like (by spray painting, for example) but the colors on mine were so interesting that I am not painting them I already had some CDs that I don't use, and I got 20 free ones online through a Yahoo freecycle group - just type in Freecycle plus your city to do a search and find a groupPeople can put rubberbands or paper clips in them, or anything small.
- Q:What's the difference between the cold rolling and hot rolling.
- The aluminum foil has no hot rolling and the original billet isn't cold rolling.
- Q:I changed the oil in my 2003 KLX 125L the other day and a piece of metal fell outIt looks just like a 9mm bulletIt doesn't appear to be cut/shaved/brokenIt just fell out of the drain plug when i undid the boltKinda has a wider base and a flat top, but in the general 9mm bullet shape and sizeAny ideas?!
- What kind of metal is it? Your cam, rod,rockers, cam chain, transmission, bearings,bolts and crank are steel, your piston, clutch basket, case and your covers are aluminum.
- Q:Why do soldiers grab their rifle magazines and hit them self's on the head with it?
- cola can, dent it - put water in dent and weed - hold lighter under can and smoke from the openingobviously hold can lengthwaysForgot about the holes - make holes in the dented bit.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Plain Aluminium Foil For Industrial Application
- Loading Port:
- China main port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 6 m.t.
- Supply Capability:
- 5000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords