Product Description:
Specifications of Paper Drywall Joint Tape-75m:
Specifications | Roll /CARTON | CARTON SIZE (CM ) | 20’FCL/ 40GP/ 40HQ |
50mm x 50m | 24 Rolls / CTN | 42 x 28 x 21.3 | 1120/2400/2740 |
50mm x 75m | 20 Rolls / CTN | 32 x 32 x 26.3 | 1037/2222/ 2537 |
50mm x 150m | 10 Rolls / CTN | 43 x 21 x 26.3 | 1166/2500/2854 |
Usage/Applications of Paper Drywall Joint Tape-75m:
Drywall Joint Paper Tape is a widely used tape in various applications, especially to be used for wall renovation ,decoration and the like , it can be stuk to plasterboard, cements as well as other building materials completely and can prevent against the cracks of the wall and its corner . Meanwhile, it can use together with our fiberglass self-adhesive mesh tape, make the building decoration and istallation easier.
Packaging & Delivery Paper Drywall Joint Tape-75m:
Roll in carton and carton in container.
- Q:Shops corner how to decorate?
- Highlight the special and value of goods.. At the top, preferably with a lamp, two walls to some embellishment, to finishing touch.
- Q:3.2*2.5 meters cloakroom, in the corner of the section how to deal with? How about making a corner with each other?
- Wardrobe length can not just try the wall size, and then need to find a special treatment of corner products, in order to use the corner of space, some commodities also take into account consumer spending habits, but also made such products,
- Q:What are the applicable industries of corner labeling machines?
- Applicable products: all kinds of cartons, such as poker boxes, mobile phone packaging boxes, etc.. And widely used in printing, food, daily chemicals, electronics, medicine and other industries.
- Q:CAD see others tagging is the corner mark, how to mark it out?
- 1. enter the linear callout command DLI, select the object to be marked.2. enter R, carriage return.3., enter the mark to rotate angle, note: enter the positive angle mark, according to counterclockwise rotation, input negative angle mark, clockwise rotation.
- Q:What skills do you have in turning corners and corners of integrated wiring?
- Specific practices are as follows: the bottom line groove need to turn the place with the square to draw 45 degrees line, and then use the iron scissors along the line position is cut off, the slot can be riveted lap bending. The line groove cover can be made by this method when it is bent horizontally at 90 degrees.
- Q:The steering angle sensor, how to replace the resolute
- The steering wheel sensor usually uses three mechanical structures to measure the angle and the number of turns. The large gear rotates along with the steering tube column, and the teeth of the two pinions differ by 1, and are fixed in the body with the sensor casing, and do not rotate with the steering wheel. The two small gears are respectively collected with the rotation angle of the steering wheel, and because of the difference of one tooth, the number of different turns will be different from the specific angle, and the absolute rotation angle of the steering wheel can be obtained by calculation.
- Q:How to solve the corner problem in the kitchen basket?
- The design of the basket at the corner solves the awkward position problem of the cupboard, and the reasonable partition is suitable for placing small objects of various sizes, and the extraction design is also convenient. If your home is not a font cabinet, it will certainly change direction in the cabinet when there is a corner space. Various corner pull baskets are the best solution for cabinet corner cabinets. When the cabinet of these two doors open, people do not sigh the way to accept the ultimate. Although the contents of the collection of many and miscellaneous, but each layer of a layer to show in front of, at a glance.
- Q:Steering wheel angle sensor operating principle
- The steering wheel sensor usually uses three mechanical structures to measure the angle and the number of turns. The large gear rotates along with the steering tube column, and the teeth of the two pinions differ by 1, and are fixed in the body with the sensor casing, and do not rotate with the steering wheel. The two small gears are respectively collected with the rotation angle of the steering wheel, and because of the difference of one tooth, the number of different turns will be different from the specific angle, and the absolute rotation angle of the steering wheel can be obtained by calculation.
- Q:Gypsum wire installation dimension, 10 cm corner line, how many corners should be removed?
- The utility model has the functions of fire protection, moisture proof, heat insulation, sound insulation and heat insulation, and can play luxurious decorative effect. Department of tightness gypsum cementitious materials, gypsum relief decoration products must have the appropriate thickness, in order to ensure that the molecular affinity between the optimal level, so as to ensure the service life and in the period of use of the integrity and security. If the gypsum relief decorative products are too thin, not only the use of a short duration, but also affect safety.
- Q:Does it need extra money to decorate the corner of the plaster line?
- This is extra. Corner and corner are 2. The corner is more expensive than the corner line
Our products are mainly divided into grinding and adhesive series. With modern equipment, the quality of the products meet international standards, products are exported to Europe and the United States and the Middle East, the quality of the product is deep the customer's trust. Our tenet is "customer first", to provide customers with better services.
1. Manufacturer Overview |
| Location |
Jiangsu,China |
| Year Established |
2002 |
| Annual Output Value |
|
| Main Markets |
|
| Company Certifications |
|
2. Manufacturer Certificates |
| a) Certification Name |
|
| Range |
|
| Reference |
|
| Validity Period |
|
3. Manufacturer Capability |
| a)Trade Capacity |
|
| Nearest Port |
|
| Export Percentage |
|
| No.of Employees in Trade Department |
|
| Language Spoken: |
|
| b)Factory Information |
|
| Factory Size: |
|
| No. of Production Lines |
|
| Contract Manufacturing |
|
| Product Price Range |
|
