Product Description:
Specifications of Metal Corner Tape-Galvanized Steel:
Corner tape galvanized steel
1. with two reinforced strips of galvanized steel
2. packed in rolls to easy used
3. for non 90'
Metal corner tape features traditional paper with two reinforcing strips of galvanized steel. The results are though corners designed to withstand "day to day" abuse.
The corner tape is easier to use than traditional metal corner bead.
Usage/Applications of Metal Corner Tape-Galvanized Steel:
It is used for forming a salient corner protecting surface to withstand the impact.
It is typically applied for in the hotels of the door and/or window.
it also saves waste, your customers cut only the size they need.
The steel corner tape can also be used on archways, curves and is ideal for non 90".
Packaging & Delivery of Metal Corner Tape-Galvanized Steel:
10 rolls in one carton.
- Q:What's the corner line?
- Artificial stone corner line, including angle line and pressing strip (1), including the outer corner angle line line (2) and the inner corner line (3), which is characterized in that the pressing strip (1) and body is fixedly connected with the corner line;
- Q:Shops corner how to decorate?
- Highlight the special and value of goods.. At the top, preferably with a lamp, two walls to some embellishment, to finishing touch.
- Q:How can the aluminum alloy window be fixed with the corner and the whole frame?
- The general approach is to fix the whole frame in the frame mounted on the wall and hit the iron, steel nails or expansion screws, then iron and fixed, then fill foam, after solidification with cement lime and smooth wall.
- Q:Causes of fog on DuPont nylon fr50 products
- For this defect, the solution is to increase the melt temperature and increase the injection speed
- Q:3.2*2.5 meters cloakroom, in the corner of the section how to deal with? How about making a corner with each other?
- Wardrobe length can not just try the wall size, and then need to find a special treatment of corner products, in order to use the corner of space, some commodities also take into account consumer spending habits, but also made such products,
- Q:What is called "Liu Cha"? Waterproofing materials to leave masonry angle will have Cha, cha.
- Stubble is need to do to prepare for the subsequent construction, waterproofing paving is reserved for the subsequent construction of the lap surface, and masonry can not stay straight cha.
- Q:What skills do you have in turning corners and corners of integrated wiring?
- Specific practices are as follows: the bottom line groove need to turn the place with the square to draw 45 degrees line, and then use the iron scissors along the line position is cut off, the slot can be riveted lap bending. The line groove cover can be made by this method when it is bent horizontally at 90 degrees.
- Q:How to solve the corner problem in the kitchen basket?
- The design of the basket at the corner solves the awkward position problem of the cupboard, and the reasonable partition is suitable for placing small objects of various sizes, and the extraction design is also convenient. If your home is not a font cabinet, it will certainly change direction in the cabinet when there is a corner space. Various corner pull baskets are the best solution for cabinet corner cabinets. When the cabinet of these two doors open, people do not sigh the way to accept the ultimate. Although the contents of the collection of many and miscellaneous, but each layer of a layer to show in front of, at a glance.
- Q:Steering wheel angle sensor operating principle
- The steering wheel angle sensor, SAS, steering, wheel, sensor, serves as an integral part of the vehicle ESP/ESC (vehicle stability control system), which is installed in the steering column below the steering wheel. It is generally connected to the PCM via the CAN bus. Generally can be divided into analog steering wheel angle sensor and digital steering wheel angle sensor.
- Q:Pcliao injection of smooth surface not light is going on
- Dark spots appear in near the gate, like dark yellow. Especially when producing products of high viscosity and low fluidity, such as PC, PMMA or ABS, they are especially obvious. This visible defect may appear on the surface of the resin when the cooling surface resin is moved by the resin flowing in the center.
Our products are mainly divided into grinding and adhesive series. With modern equipment, the quality of the products meet international standards, products are exported to Europe and the United States and the Middle East, the quality of the product is deep the customer's trust. Our tenet is "customer first", to provide customers with better services.
1. Manufacturer Overview |
| Location |
Jiangsu,China |
| Year Established |
2002 |
| Annual Output Value |
|
| Main Markets |
|
| Company Certifications |
|
2. Manufacturer Certificates |
| a) Certification Name |
|
| Range |
|
| Reference |
|
| Validity Period |
|
3. Manufacturer Capability |
| a)Trade Capacity |
|
| Nearest Port |
|
| Export Percentage |
|
| No.of Employees in Trade Department |
|
| Language Spoken: |
|
| b)Factory Information |
|
| Factory Size: |
|
| No. of Production Lines |
|
| Contract Manufacturing |
|
| Product Price Range |
|
