PVC Corner Bead With Fiberglass Screen Mesh-EA01
- Ref Price:
-
- Loading Port:
- Qingdao Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 10000M m
- Supply Capability:
- 200000M/MONTH m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications of PVC Corner Bead With Fiberglass Screen Mesh-EA01:
PVC corner bead with mesh cloth is corrosion resistant, flexible and make the installation of the edge quicker,it can reinforces exterior stucco corners,make the corner hard-to-damage, rustproof,straight,and easily curved for smooth arches;
Length: 2.50m - 3.0m
Mesh Cloth Width: 8+ 12cm or 10+ 15cm
Mesh Weight: 145 g/m2
Width of Bead: 20mm
Thickness of Bead: 1mm
Weight of Bead: 70g;
Usage/Applications of PVC Corner Bead With Fiberglass Screen Mesh-EA01:
It used for construction to perfect the wall surface reinforcement.
Corner Bead with Fiberglass Mesh
The products can be widely used in all kinds of construction projects,to make the constrction simply, to cut down cost,to the angle of the wall artstic but not to be damaged.Using the corner beads,you can do the construction in steps,also can enhance the construction efficiency two to five times.The primary worker can replace the intermidiate worker after using the corner beads.For example.if using the corner beads,you canmake the time of the building project reduce from ten months to seven or eight months.I am sure that the corner of the wall will not be splitted except you damage it on purpose.
Packaging & Delivery of PVC Corner Bead With Fiberglass Screen Mesh-EA01:
Pieces are put into carton.
- Q:What skills do you have in turning corners and corners of integrated wiring?
- Just cut it diagonally. The two angles are right together
- Q:What is the masonry and inclined straight cha cha
- Understand the concept of slant Cha: according to the national standard, when building the wall, if a wall is not the day to second days after finishing brick, then built, not built where to calculate, to second days after the first day of the last puzzle, you should build a sawtooth like shape imaging. The cable length should not be less than the height of the oblique Cha amount 2/3, its function is combined with the brick wall increased with brick masonry masonry before the. Can not be as smooth as a knife edge, in that case, the wall is not strong.
- Q:Does the slot plate have a routing board with a 90 degree angle when it is wiring?
- Dedicated ground wiring line groove plate, wire slot plate made of high strength rubber composite materials produced by suitable temperature -32 to 65 degrees Celsius, durable, durable pressure and long service life, less wear on the car, no noise, excellent damping resistance. The standard yellow and black production process, bright colors, clear colors, obvious signs, whether in the day or night, have a high visibility, attract motorists to pay attention to deceleration. The use of advanced internal expansion anchor technology, solid installation, stable and reliable, without damage to the ground can be wired. It is one of the main products in the traffic department.
- Q:Automatic CNC band saw machine, product use and advantages?
- Trolley type CNC feeding band sawing machine with rotary angle of 0 degrees to 45 degrees: real and the workpiece rotation, can be completed from 0 degrees to 45 degrees between the bevel of arbitrary angle.
- Q:CAD see others tagging is the corner mark, how to mark it out?
- The corner mark in AutoCAD, this name is a bit special. In fact, when a horizontal or vertical distance is marked in linear form, the completed annotation is the corner mark.
- Q:How should the TV wall be installed on the corner?
- European style TV wallIf your favorite European country style, then the iron carving, beautiful color painting, created by the wall of the TV cabinet, plus dotted with porcelain, antiques, this is a typical European country style. Such a TV wall can feel as if it were in a picturesque nature.
- Q:Shops corner how to decorate?
- Just make a publicity campaign based on your product
- Q:Plastic products surface of weld line, how to deal with the clip
- Injection molding is the process by which molten plastic enters the mold cavity through a gate and forms a product of a certain shape after cooling. Many products are through holes, angle, plastic flow of the melt mold wall damping on their will, local damping angle will be greater, so even if there is no hole products, molten plastic flow velocity inside will be different, because the velocity is not uniform, at the same time, it is not possible to fill the whole cavity, plastic materials, two different flow rate of molten in a cavity at the rendezvous, which we often say that the clip wave, also known as the joint line. This is the formation of the clamping mechanism.
- Q:What is the position of the steering wheel sensor and what is its function?
- The steering wheel sensor usually uses three mechanical structures to measure the angle and the number of turns. The large gear rotates along with the steering tube column, and the teeth of the two pinions differ by 1, and are fixed in the body with the sensor casing, and do not rotate with the steering wheel. The two small gears are respectively collected with the rotation angle of the steering wheel, and because of the difference of one tooth, the number of different turns will be different from the specific angle, and the absolute rotation angle of the steering wheel can be obtained by calculation.
- Q:Does it need extra money to decorate the corner of the plaster line?
- You should say it's the corner where the plaster line is good and the connection is nice
1. Manufacturer Overview |
|
|---|---|
| Location | Shandong,China |
| Year Established | 2006 |
| Annual Output Value | |
| Main Markets | Japan, North America, South America, Western Europe, eastern Europe, east Asia, southeast Asia, the Middle East, Africa, Oceania |
| Company Certifications | ISO9001:2000 |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
PVC Corner Bead With Fiberglass Screen Mesh-EA01
- Ref Price:
-
- Loading Port:
- Qingdao Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 10000M m
- Supply Capability:
- 200000M/MONTH m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
