Product Description:
Specifications of Paper Drywall Joint Tape-150m:
specifications | Roll /CARTON | CARTON SIZE (CM ) | 20’FCL/ 40GP/ 40HQ |
50mm x 50m | 24 Rolls / CTN | 42 x 28 x 21.3 | 1120/2400/2740 |
50mm x 75m | 20 Rolls / CTN | 32 x 32 x 26.3 | 1037/2222/ 2537 |
50mm x 150m | 10 Rolls / CTN | 43 x 21 x 26.3 | 1166/2500/2854 |
Usage/Applications of Paper Drywall Joint Tape-150m:
Drywall Joint Paper Tape is a widely used tape in various applications, especially to be used for wall renovation ,decoration and the like ,it can be stuk to plasterboard, cements as well as other building materials completely and can prevent against the cracks of the wall and its corner.
Meanwhile, it can use together with our fiberglass self-adhesive mesh tape, make the building decoration and istallation easier.
Packaging & Delivery of Paper Drywall Joint Tape-150m:
Each Fiberglass Mesh Roll is put into PVC bag or Shrink Bag, and then put into Carton or Pallet.
- Q:What's the corner line?
- The composition and content of the corner line body are as follows: (weight percentage): unsaturated polyester resin 22 to 70%; filler 28 to 74%; curing agent 0.1.5%; promoter 0.1.5%; pigment 0.2%.
- Q:What corner is the corner cabinet with five corners?
- The inspection report is indispensableWhen asked about the test report, many businesses will produce raw materials inspection reports, in fact, issued by the state requirements, furniture is finished product testing report, but also need to indicate the content of formaldehyde. Raw materials testing report can not replace the finished product inspection report, consumers need to polish their eyes at this time, to prevent some businesses deceptive.
- Q:IKEA corner wardrobe 96cm size, why 73cm?
- Before buying, you can understand the material, size, and how to install it on the website. No domestic furniture company can do it!
- Q:What do you mean by corner steering of Bao Chun 730ABS steering wheel?
- The steering wheel sensor usually uses three mechanical structures to measure the angle and the number of turns. The large gear rotates along with the steering tube column, and the teeth of the two pinions differ by 1, and are fixed in the body with the sensor casing, and do not rotate with the steering wheel. The two small gears are respectively collected with the rotation angle of the steering wheel, and because of the difference of one tooth, the number of different turns will be different from the specific angle, and the absolute rotation angle of the steering wheel can be obtained by calculation.
- Q:What skills do you have in turning corners and corners of integrated wiring?
- Specific practices are as follows: the bottom line groove need to turn the place with the square to draw 45 degrees line, and then use the iron scissors along the line position is cut off, the slot can be riveted lap bending. The line groove cover can be made by this method when it is bent horizontally at 90 degrees.
- Q:Ask about the product performance and advantages of DJ series corner band sawing machines!
- Super CNC corner band saw machine can automatically reduce or increase the speed of sawing feed according to the specifications and material differences of the workpiece.
- Q:What is the masonry and inclined straight cha cha
- Understand the concept of slant Cha: according to the national standard, when building the wall, if a wall is not the day to second days after finishing brick, then built, not built where to calculate, to second days after the first day of the last puzzle, you should build a sawtooth like shape imaging. The cable length should not be less than the height of the oblique Cha amount 2/3, its function is combined with the brick wall increased with brick masonry masonry before the. Can not be as smooth as a knife edge, in that case, the wall is not strong.
- Q:Steering wheel angle sensor operating principle
- The steering wheel sensor usually uses three mechanical structures to measure the angle and the number of turns. The large gear rotates along with the steering tube column, and the teeth of the two pinions differ by 1, and are fixed in the body with the sensor casing, and do not rotate with the steering wheel. The two small gears are respectively collected with the rotation angle of the steering wheel, and because of the difference of one tooth, the number of different turns will be different from the specific angle, and the absolute rotation angle of the steering wheel can be obtained by calculation.
- Q:Microcrystalline stone xinzhongyuan ceramics why stick after a period of time where the angle is easy to crack?
- Microcrystalline stone have generally avoided cutting angle of L, and the corner if you are generally cut shop workers will have cracks, then can not see, but a long time stress release crack will be larger, if it is a thin transparent ceramics to the occurrence of this phenomenon, there is a possibility that the sintering temperature of microcrystalline stone will not lead to this phenomenon, there is a buy - stone, I suggest you buy a Baird.
- Q:Large angle hinge is used at the corner of the cabinet
- 90 degree plane hinge ~ 180 degree hingeThe 90 degree hinge is connected to the two door panelsThe 180 hinge is mounted on the side plateBut this has a higher demand for hingesIf the quality is not good, the sink will not sink
We imports dozens of advanced extrusion production line, extrusion products with high efficiency and less defective products, and have strict quality inspection and audit. We has a number of ingredients, molds, machinery, management engineer, formula from the plastic to the mold to production are made by scientific method. We in a complex and difficult profiles production has reached international level, mold development, product cutting, punching, stickers, packaging more efficient and accurate.
1. Manufacturer Overview |
| Location |
Zhejiang,China |
| Year Established |
2007 |
| Annual Output Value |
|
| Main Markets |
North America, South America, Western Europe, eastern Europe, southeast Asia, the Middle East |
| Company Certifications |
ISO 9001 |
2. Manufacturer Certificates |
| a) Certification Name |
|
| Range |
|
| Reference |
|
| Validity Period |
|
3. Manufacturer Capability |
| a)Trade Capacity |
|
| Nearest Port |
|
| Export Percentage |
|
| No.of Employees in Trade Department |
|
| Language Spoken: |
|
| b)Factory Information |
|
| Factory Size: |
|
| No. of Production Lines |
|
| Contract Manufacturing |
|
| Product Price Range |
|
