Medium-voltage XLPE insulated power cable

Ref Price:
Loading Port:
China Main Port
Payment Terms:
TT OR LC
Min Order Qty:
-
Supply Capability:
-

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Specifications

110-220kv XLPE insulated power cable
1.XLPE CABLE Has passed CE,ISO,CCC,certificate
2.sell well in Europe, America, Asia

XLPE Insulated Power Cable

1.Basic Information.

Voltage : Low and Medium Voltage Cable

Conductor Material : copper

Insulation Material: XLPE

Sheath : PVC or PE

Appliation : Underground

Certificate : CE UL SGS ISO

Export Markets : Global

2.High voltage cable 64/110KV

Applying to GIS substations, hydropower stations, etc. 64/110KV .

Rated voltage 64/110KV XLPE copper core and PE insulated wrinkled aluminum wrapper waterproof layer PE(or PVC) sheathed power cable.

1.  The cross-linkage PE insulated and wrinkled aluminum wrapper waterproof PVC sheathed power cable.

Type

YJLW02, YJLLW02

Specification

240mm2~3000mm2

Voltage

110~220KV

Usage

Suitable for the places with a higher underground water level and to be used underground, in the tunnels or pipes. Such cables bear a bigger pulling force and pressure.

2.The cross-linkage PE insulated and wrinkled aluminum wrapper waterproof PE sheathed power cable.

Type

YJLW02, YJLLW02

Specification

240mm2~3000mm2

Voltage

110~220KV

Usage

Suitable for the places with a higher underground water level and to be used underground, in the tunnels or pipes. Such cables bear a bigger pulling force and pressure.

Specific property for usage of 110KV~220KV XLPE high-voltage cable:

1.       Cable’s conductor highest working temperature is allowed up to 90°C, and overload when meet an emergency is 130°C , When short circuit (in ≤5 seconds) the highest temperature is 250°C

2.       When installing or laying cable, the ambient temperature should be less than -20°C, and have to give a preheat to cable.

3.       The minimum bending diameter:

Cable type Bending  diameter

Metal sheathed

After laying

30D0

During laying

40D0

Note: In form, D0 is a real test value to cable’s outer diameter.

4.       Allowed biggest axial traction force to outer diameter when laying cable (not consider the radial lateral-pressure at bent set ion) T=K×core NO. ×section (kg), in formula, the coefficient K value should be: the copper core get 7, the aluminum core get 4.

5.       Allowed biggest lateral-press P, when cable is being bent

The single core cable is required P≤500kg/m.

P=T/R (T is indicated axial traction force; R is indicated radius of bent-wheel), Knowing from above formula, as the traction force is made up by length and weight of cable. So it lets P to applying requirement as above. Then the diameter of bent-wheel should be widened.

6.       Cable laying is not being restricted by drop.

3.Specification

Type

Designation

Application

YJV

Copper conductor , XLPE insulated and PVC sheathed Electrical

cable

For laying indoors, in tunnels or cable trench,

unable to bear external mechanical forces.

YJLV

Aluminum conductor , XLPE insulated and PVC sheathed

Electrical cable

YJY

Copper conductor , XLPE insulated and PE sheathed Electrical

cable

YJLY

 

Aluminum conductor , XLPE insulated and PE sheathed

Electrical cable

YJV22

Copper conductor , XLPE insulated, steel tape armored and PVC

sheathed Electrical cable

Indoors, tunnels, cable canal, vertically burying and

easy to corrode places, can bear mechanical

pressure.

YJLV22

Aluminum conductor , XLPE insulated, steel tape armored and

PVC sheathed Electrical cable

YJV23

Copper conductor , XLPE insulated, steel tape armored and PE

sheathed Electrical cable

YJLV23

Aluminum conductor , XLPE insulated, steel tape armored and

PE sheathed Electrical cable

YJV32

Copper conductor , XLPE insulated, steel wire armored and PVC

sheathed Electrical cable

Vertically laying, can bear mechanical pulling

force, but not pressure.

YJLV32

Aluminum conductor , XLPE insulated, steel wire armored and

PVC sheathed Electrical cable

YJV33

Copper conductor , XLPE insulated, steel wire armored and PE

sheathed Electrical cable

YJLV33

Aluminum conductor , XLPE insulated, steel wire armored and

PE sheathed Electrical cable

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Power cable question.?
Possibly on the BoxiT-200 that takes 12 to 19 volts at 3 amps, positive center. Read the printing on user manual, it gives the requirements. Most other Elmo projectors are plugged into an ac outlet.
Q:Why my home analog TV connected to the digital TV set-top box after the screen is black and white
Cabling in the integrated wiring system according to the network topology diagram to configure how to connect, no network topology is unable to give the correct connection.
Q:Would a maxtor 320GB external hard drive work without a power cable if I connect it to the USB port?
Yes you need a power supply for all 3.5 inch drives. The laptop drives on the other hand will power off USB. Is this a SATA or ESATA drive? You can buy an enclosure for the SATA for around 35.00 and 70.00 + for a good ESATA enclosure. The cheaper ones do not work to well with the ESATA. If it's EIDE then you can get one off OKorder for around 12.00. Good luck.
Q:Need to find a spare hole in my ford c-max 2010 mod to run my power cable for my amp?
In most vehicles there are spare holes filled with rubber plugs. Pop one out with a screwdriver and make a hole in plug a little smaller than the size of the wire for a very tight fit. If it's a smaller size power wire, it can sometimes be run through the same grommet as the vehicles main harness. Be very careful not hurt the existing wire. I have seen people get careless and screw the harness up and it's not easy or cheap to fix. When doing this I usually use a stiff wire (a small diameter yet long screwdriver can work too) and slide it through the grommet. I then use electrical tape to secure the power wire to stiff wire and pull it through. Make sure your penetration point is still leak proof after doing this. You may need to use some silicone and or electrical tape to seal it up.
Q:Latching hard drive power cable?
No. Latching cables as you call them are available at retailers. Try Newegg...
Q:3 (WDZBN-YJV-4x240 + 1x120) cable how to interpret
3 (WDZBN-YJV-4x240 + 1x120) cable is a low smoke halogen-free flame retardant (B grade) XLPE insulated - PE sheathed copper core power cable. The model of the cable is usually composed of eight parts: First, the use of code - not marked as the power cable, K for the control cable, P for the signal cable; so the power cable. Second, the insulation code -Z oil-impregnated paper, X rubber, V polyvinyl chloride, YJ cross-linked polyethylene; so for the cross-linked polyethylene insulation. Third, the conductor material code - not marked as copper, L is aluminum; therefore copper. Four, inner layer code-Q lead package, L aluminum bag, H rubber sleeve, V PVC jacket; so for the PVC jacket. . derived code-D no drip, P dry insulation. Sixth, the outer layer code. . special product code-TH wet tropical, TA dry tropical, ZR- (flame retardant), NH- (fire), WDZ- (low smoke zero halogen, enterprise standards); so low smoke halogen-free flame retardant The . rated voltage - unit KV; general cable are marked, the problem is estimated to write missing 0.6 / . the use of: rated phase voltage of 0.6KV, line voltage of 1KV. In the cable, 4 * 240 + 1 * 120 that there are 4 core 240 square copper wire, a 1-core 120 square copper wire.
Q:Where can I purchase a power cable for our Toshiba Equium laptop?
It is possible that your cable may have some broken wires inside that are causing your problem, or it may be the board as mentioned above. The board that is being referenced is the power connector inside your laptop and it's connection to the system board. What can happen is the electrical connections (solder joints) from the connector to the board become broken/loose and you have an intermittent connection. I have re-soldered these for friends when theirs go bad, otherwise a replacement system board would be required. I have also seen where the small leaf spring contact inside the connector becomes flattened and has poor contact as well (if this is the type of connector you have). You could check this with a good light and look inside the hole, there should be a center pin contact and a leaf contact along one side that should come down about halfway into the hole to the pin. To test where the problem is, connect your cord to your laptop, now hold the connection very still at the connector and wiggle, twist, push, and bend the cable at various points to see if the light at the front of the computer goes on or off. Now also test the plug at the computer by carefully moving it up, down, around in various ways to see if the light goes on or off. Wherever you find your problem is where you'll need to fix. If it is the power cable, yes, you should be able to buy a replacement. Try Toshiba's website or google the numbers you have to see what turns up. Hope that helps explain things better. Best of luck.
Q:2 GAGE POWER CABLE TO HOT!!!!?
Too hot means the current is very high. Probably in excess of 200 amps. I suspect there is a short in the amp, specially if you tried to connect it hot and drew a spark. That will kill a lot of electronics. .
Q:What kind of power cable do I need for this phone?
Give them a try. This isn't a common power cord that can be purchased locally. However you may find a used one on OKorder. You can do an OKorder search using the model number of the unit.
Q:Dell laptop plug in the power supply usb can not be used, how is it?
Do not recommend you use that, if the time is slightly longer, the battery has lost, and the performance is also reduced. You use the notebook, the battery on the inside, even if the charger has been stuck all right. The computer has a battery automatically charge the chip, say the lithium battery no memory effect, but very lazy. If it has been in the active state will be very lively. Storage capacity will always be maintained, on the contrary, the loss of vitality, your battery is a little bit lost, their own look,

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range