Ivory TPU Film with 90A in Hardness of CNBM in China
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m²
- Supply Capability:
- 100000000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Introduction of TPU Film
Compared with the PU film, this kind of TPU film is with:Better elasticity, waterproofing, wear resistance, tear resistance and anti-yellowing.High temperature resistance and cold resistance.
Good for outdoor usage.High resistance to oils, grease and solvents.Good resistance to weather exposure.
2.Application of TPU Film
Household: shower curtain, table cloth, raincoat, umbrella
Bags: cosmetic bags, ziplock bag, cooler bags(liners)
Stationery: book cover, card holders/jackets, binders
3.Advantage of TPU Film
lightweight——low density 0.928 g/cm3
Durability——due to it’s good flexing and cold resistance
Good toughness
easy edge-tear processing, soft hand feeling
Available for silk screen and offset printing
Non-toxic and without plasticizer, can reach the standard like: FDA, REACH,ROHS,EN71-3
The similar price VS PVC, but more eco-friendly
4.Packing of TPU Film
CNBM TPU film is packed by Seaworthy Packing
5.Pictures of TPU Film
6.Specification of TPU Film
Item | Units | ASTM | 1680A-E | 1685A-E | 1690A-E |
Hardness | Shore A | D-2240 | 80A | 85A | 90A |
Tensile Strength | Mpa psi | D-412 | 18 2625 | 30.5 4420 | 41.5 6020 |
Elongation | % | D-412 | 848 | 735 | 570 |
Tear Strength | N/mm lb/in | D-624 DIE C | 7.8 438 | 8.8 495 | 14.6 818 |
Ross Flexing Test | -6°C 150000 times | D-1052 | No Break | No Break | No Break |
Tensile Modulus @ 300% elongation | Mpa Psi | D-412 | 7.5 1087 | 9.4 1356 | 23.2 3375 |
M V T properties | g/m2.day | E-96BW | 8800 | 9000 | 7400 |
7.Remarks
Our TPU products have passed the inspection of many international well-known tests such as SGS, ASTM, JIS, FDA and so on. Our TPU products are environmental friendly, non-toxic, water resistant, anti-yellowing, hydrolysis resistant, cold tolerant, high temperature resistant and good tearing resistant. Our TPU materials are not only applicable to the modern production field of articles for daily use, but also suitable for military - industrial complex, medical, electronics and other production areas such as for cricket bat, clothing, shoes, medicines, national defense, electronics, packaging materials, Inflatable products, waterproofing material, stone chip protection, high-end building sticker, solar protection film and so on.
8.FAQ
We have organized several common questions for our clients,may help you sincerely:
①How about your company?
A world class manufacturer & supplier of castings forging in carbon steel and alloy steel,is one of the large-scale professional investment casting production bases in China,consisting of both casting foundry forging and machining factory. Annually more than 8000 tons Precision casting and forging parts are exported to markets in Europe,America and Japan. OEM casting and forging service available according to customer’s requirements.
②How to guarantee the quality of the products?
We have established the international advanced quality management system,every link from raw material to final product we have strict quality test;We resolutely put an end to unqualified products flowing into the market. At the same time, we will provide necessary follow-up service assurance.
③How long can we receive the product after purchase?
In the purchase of product within three working days, We will arrange the factory delivery as soon as possible. The pecific time of receiving is related to the state and position of customers.Commonly 7 to 10 working days can be served.
- Q:The use of the protective film
- Introduction of the use of protective film: Accoding to the application range, protective film can be used on surface protection in fields as follows: metal products, coated metal products, profiles, electronic products, plastic products, scutcheons, automotive products and other products.The biggest advantage of PE film is that it can protect the product from pollution, corrosion and scratching throughout the whole process from production, processing, transpotation, storage to end use.
- Q:What are the uses, features and descriptions of PET protective films?
- Use of PET protective film1. surface hardening (HC) treatment, up to 3.5-4H, scratch resistant and wear-resistant.2. silicone composite layer is adhesive, can prevent the formation of bubbles.3., silicone features are repeated paste, leaving no traces, no corrosion of the surface.4, used to protect the LCD, touch screen, mobile phones, digital cameras and PDA screen, in use to avoid scratches, to protect the screen effect.5. the coating is made of an optical grade transparent polyester film (PET) coated with silica gel and then bonded to a transparent polyester (PET) release film.6., composite silicone layer can effectively absorb part of the direct collision, protect the screen is not easy to damage.
- Q:The lampblack machine to buy. There has been no tear the film. That is similar to the white plastic, very thin], now again tear is not very easy, but just like glue, stick to the appliance with a blade surface, if the like will leave traces, have what chemical method? Or is a shortcut?
- Special cleaning agent for cleaning air conditioning (such as "off", air conditioning has too much oil cooling effect on the use of this, the effect is very good), refrigeration accessories shop sell.
- Q:How to tear off the protective film on the stainless steel security door?
- The reason why you can't remove the film is that the outer film made from polyethylene material chemecally reacts with the surface paint of the door. And the film and the paint stick to each other. You can clean the film with some of the paint using thinners. But I think it doesn't affect too much.
- Q:What is the difference between protective film and sticker?
- The original protective film can only protect the screen from scratches and pollutions for the period of time from delivery to use. It's not for regular protection for screen. And it won't work any more after using for a period of time. But sticker is different. Generally, sticker cover the whole product(generally, surface) to prevent dust and scratches. It has wear resistance and somewhat water proofness and quake proofness. But it also has disadvantages. There's a kind of specific glue on the it which makes it difficult to remove the sticker because some glue may remain on the surface of the products.
- Q:Plastic steel doors and windows on the protective film for a long time, aging how to get rid of it?
- 1. Blow the hair dryer after heating (if not see 2)2, boiling water after scraping (if not see 3)3, the protection film cast polishing machine4, and finally wipe with toothpaste
- Q:What can chemically react with protective film of ceramic tile?
- The protective film coated on ceramic tiles is a kind of PE film. The PE in PE protective film refers to Polyethylene. It's a kind of macromolecule organic compound with the simplest structure. And it's the most widely used polymer material in the world today. PE prtective film uses specific PE plastic membrane as its basic material. Accoding to density, PE film can be classified into high-density, medium-density and low-density PE film. The biggest advantage of PE film is that it can protect the product from pollution, corrosion and scratching throughout the whole process from production, processing, transpotation, storage to end use. It keeps the product clean and glossy which means to improve the quality and market competitiveness of the product.
- Q:How to clean up the protective film on LCD?
- Use alcohol.
- Q:Use of protective film for decoration
- Entrance door protectionAll kinds of decoration materials and a variety of architectural decoration into garbage clean-up, will go through a door, these items in the handling process, the probability of collision, friction and Ruhumen greatly increased, therefore, the first need to protect product place is our entry door. Recommendation: all doors should be protected before the decoration starts until the furniture comes into play! For this, you can use the finished protective film to wrap the door.
- Q:The protective film on the surface of raw materials.
- If it can't be solved, wash it by sulfate, then it could be probably faded.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Ivory TPU Film with 90A in Hardness of CNBM in China
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m²
- Supply Capability:
- 100000000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords