High Voltage Mining Cable 0.3/0.5kV,0.38/.066kV,1.9/3.3kV,3.6/6kV,6/10kV.
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 100 m
- Supply Capability:
- 100000 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
High Voltage Mining Cable 0.3/0.5kV,0.38/.066kV,1.9/3.3kV,3.6/6kV,6/10kV
Description
1、 Rated voltage of the cables is divided into 6 grades,which is 0.3/0.5kV,0.38/.066kV,1.9/3.3kV,3.6/6kV,6/10kV.
2、 There are allowed long-term working temperatures of the cable conductor. Fro the cable of U(M)CPT-0.66/1.14, U(M)CPJB-0.66/1.14, U(M)CPJR-0.66/1.14 and 1.9/3.3kV, 3.6/6kV, 6/10kV, the temperature is 90℃;for the other,it is 65℃。
3、 Minimum bending radius:for the cable of U(M)CPJB-0.66/1.14, U(M)CPJR-0.66/1.14,it is 15 times of the cable diameter; for the others,it is 6 times of the cable diameters.
4、 The grouding wire should be well connected with the earth.
5、 The cable should be prevented from exposing to the sunshine for a long time.
Implemented Standard
1、 For the noe-spread combustion cable,implement GB12972 《Flexible rubber mining cable》
2、 For the flame-retardant cable,implement MT818《Flame-retardant cable used in the coal mine》
3、 For the special mining cable(with bigger cross-section and higher voltage),implement the enterprise standard.
Specification
Type | Description | Application |
MC-0.38/0.66 | Rubber flexible cable for excavator | As the power connection used in the excavator or similar equipments with rated voltage 0.38/0.66kV |
MCP-0.38/0.66 | Shielded,rubber-sheathed flexible cable for excavator | As the power connection used in the excavator or similar equipments with rated voltage 0.38/0.66kV |
MCP-0.66/1.14 | Shielded,rubber flexible cable for excavator | As the power connection used in the excavator or similar equipments with rated voltage 0.38/0.66kV |
MCPJB-0.66/1.14 | Shielded ,monitoring and braiding reinforced type,rubber flexible cable for excavator | As the power connection used in the excavator or similar equioments with rated voltage 0.66/1.14kV,it can be draged directly |
MCPJR-0.66/1.14 | Shielded ,monitoring and braiding reinforced type,rubber flexible cable for excavator | As the power connection used in the excavator or similar equioments with rated voltage 0.66/1.14kV,it must be used in the protective chain panel |
MCPT-0.66/1.14 | Metallic shielded rubber flexible cable for excavator | As the power connection used in the excavator or similar equioments with rated voltage 0.66/1.14kV |
MCP-1.9/3.3 | Shielded rubber flexible cable for excavator | As the power connection used in the excavator or similar equioments with rated voltage 1.9/3.3kV |
MCPT-1.9/3.3 | Metallic shielded rubber flexible cable for excavator | As the power connection used in the excavator or similar equioments with rated voltage 1.9/3.3kV |
MCPTJ-0.66/1.14 MCPTJ-1.9/3.3 | Metallic shielded,moitoring type, rubber flexible cable for excavator | As the power connection used in the excavator or similar equioments with rated voltage 1.9/3.3kV |
MY-0.38/0.66 | Movable rubber flexible cable for mining | As the power connection used in the mining machine with rated voltage 1.9/3.3kV |
MYP-0.38/0.66 | Movable shield rubber flexible cable for mining | As the power connection used in the mining machine with rated voltage 0.38/0.66kV |
MYP-0.66/1.14 | Movable shield rubber flexible cable for mining | As the power connection used in the mining machine with rated voltage 0.66/1.14kV |
MYPJ-3.6/6 | Monitoring movable shield rubber flexible cable for mining | As the power connection used in the mining transfomer and similar equipments with rated voltage3.6/6kV |
MYPTJ-3.6/6 | Metallic shielded monitoring type movable rubber flexible cable | As the power connection used in the mining transfomer and similar equipments with rated voltage3.6/6kV |
MYP-3.6/6 | Movable shield rubber flexible cable for mining | Mining equipments with rated voltge 3.6/6kV the min.enviroment temperature is -20℃ |
MYPT-3.6/6 | Movable metallic shield rubber flexible cable for mining | Mining equipments with rated voltge 3.6/6kV the min.enviroment temperature is -20℃ |
MYPD-3.6/6 | Movable shield rubber flexible cable for mining | Mining equipments with rated voltge 3.6/6kV the min.enviroment temperature is -40℃ |
MYPTD-3.6/6 | Movable metallic shield rubber flexible cable for mining | Mining equipments with rated voltge 3.6/6kV the min.enviroment temperature is -40℃ |
MZ-0.3/0.5 | Driller cable for mining | As the power connection of driller with rated voltage 0.3/0.5kV |
MZP-0.3/0.5 | Driller shielded cable for mining | As the power connection of driller with rated voltage 0.3/0.5kV |
MYQ-0.3/0.5 | Movable light-type rubber flexible cable for mining | Lighting in the mine,as the power connection of the interlock and control signals used in the transport machine and equipments |
Notes: According to the customer’s requirements,we can design and manufacture all kinds of rubber mining cables, with bigger cross-section,higher voltage(10,15kV),double-color sheath used in the mining machines and equipments,including the machines and equipment from England and Germany.
Picture
- Q:My car wont start and only starts after moving power cables up and down. Im not sure what the problem is. If i slightly move it I see alittle sparking under the engine. When i manipulate the battery power cables it manipulates all the wires connecting to it so i cant pin point where the problem is. When i try to start ignition there is zero sound. When i manipulate cables it starts right up and cranks fine.
- Sounds to me that you have a BAD BATTERY here. Is it the ORIGINAL factory one, or some after market one?? When the cells inside a battery short out internally, sometimes if you jiggle the cable, it will make a false, temporary connection inside. Remove your battery, and have it bench tested. Get another factory battery, or an OPTIMA battery or a DEKA battery. THese all tested higher than usual. A good EUROPEAN battery is another good choice, if you can find one in that exact size. GOOD LUCK!! CLean your IAC valve and throttle body. THis will insure the wuickest ,easiest starts. GOOD LUCK!!
- Q:When I put the laptop into hibernation, the power pack still makes a considerable amount of noise. Since the memory was saved to the hard drive, is it okay to disconnect the power cable? Please note that the battery on the computer is pretty much dead and lasts for about 2 mins tops on normal mode
- If it's true hybernation (and not hybrid sleep [?] or suspend) then everything is on the hard drive and the machine is completely powered down. You can safely remove the power cable - and even the laptop battery (if you wanted to, just to prove it works) - and a hour/day/week later pop those back in and when you power back up you should be good to go. EDIT: If it's true hibernation you can leave it like that for years. (Just do a simple test without power cord or battery as mentioned here and see if it works before trusting it.)
- Q:i soldered in one of those ribbon cables on to my hp's laptop power button cause the old ribbon was failing. anyways i am having some issues with this new cable1 the laptop will power on by itself if i insert the ribbon into the motherboard connector2 the only way to power off the laptop is to remove the cable from the mother board connector and that means opening up the whole laptop3 like i said it will power on by itself so that means that i cant turn it on/off with the power buttonevery thing is soldered correctly i dont understand also i am not sure but does the cable have to be like the old one cause the new one i soldered in looks the same? could it be that it needs that one particular cable replaced again? please help me i am sad
- Time to hang up our computer repair skills and take it to a shop...
- Q:Physically, I want to know what the cable looks like around the part that plugs into the laptop. I have a kink in the cable around that point, but don't know if cutting it and soldering is an option, depending on how complicated that part of the cable is. The rest of the cable is really simple (positive and negative) but does it get complex at the end?Note: I'm only talking about the cable, not the laptop jack itself. I'm talking about the end farthest away from the brick, that plugs into the laptop. I wanna know what that looks like, and how easy it would be to repair.
- If that is what you are trying to do,. just make sure you get one of the same size. =] EDIT: hour:32 minutes: OK!!! Then there should be no problem. Just cut the cable and solder it again. ie. lets say this is the cable: END__DAMAGE HERE_____Start Cut whre its damaged and solder it. You shold get somethng ike this: END___________Start =]
- Q:My internet went down after a lightning storm. My cable modem is completely unresponsive and won't even power up, but everything else on the power strip is fine. So I am assuming the surge came through the coaxial. Someone suggested that the cable might fry any new modem I put on it, but that sounds off to me.Do I need to replace the coaxial, or will it be safe to just replace the modem?
- If modem won't power up, see if you can find an identical power brick and try that. What is important is the voltage is same and amperage is at or above what the correct one is. And the connector needs to be the same. If that doesn't work, replace modem.
- Q:I do not have the Video Card in hand but I will in a few days and I already know the adapter cable has gone missing. The NVdia Website is no help. I have an HP Pavilion Elite desktop. I want to acquire the cable before I receive the Video Card, so I can install it right away. I want to know exactly the type of power connector cable is so I can go online and order it now.
- Power connector cable? Usually, you don't need an adapter cable: you just plug the video card into one of the PCI expansion card slots available on the motherboard, then you plug the monitor's cable to connect the monitor to the computer via the serial port on the video card. Knowing what computer you have doesn't really help: You have to tell us the motherboard's brand model to see if this particular video card is compatible for your computer's motherboard.
- Q:How can we make out the physical size of a power cable if the cable is said to be 4 core, 150 sq.mm ??? How will we measure the diameter of this cable ???? please suggest......
- If the size of the cable is 4 core, 150 sq.mm; = the cross sectional area of each core is 150 sq.mm. The diameter of each core is gotten from the formula C = ╥d. From this $ substituting values for ╥ and C; We find that d = 150 / 3.142. = d = 47.74mm :. for 4 cores, diameter of cable = 47.74 * 4 = 190.96mm However, note that this is only mathematical. On the field, the dimension of a cable is usually specified based on the number of cores it has, and the cross sectional area of one of the cores as the cores are all of the same size.
- Q:this 40gb ps3 has no power computer cord or hdmi cable and i would like to know how much money i would spend all in all with allt he stuff i need...
- no longer all ps3 video games help 1080p, alot are purely 720p. in case your television is an entire hd television (helps 1080p) and it says 1080p on the again of the game case, then it will be in 1080p. If it says 720p on the again of the game case, then it will be in 720p.
- Q:is it possible to split the live wire feeding my car stereo into 3 feeds so one is my stereo , two is my satnav power cable and the 3rd is my reversing sensor display. will this overload the wires? any advice how i can do this would be most helpful. thanks
- I'm assuming you mean the wire providing the 12-volt power to your radio? And you want to connect other unit's it? It all depends on how much current is drawn by the additional units. Do they have fuses? What sizes are they? Backup cameras usually draw very little current and have really thin wires. Shouldn't be a problem. What type of navigation device? Does it use a DVD-ROM or is it just on a chip, like a portable Tom Tom, Garvin, etc.? If neither of the units' fuses exceed 5 amps, I'd say you're safe (in most cars) running it from the radio's power wire. However, you didn't state the type of car. Late-model GM cars or Audi/Volkswagen have low-current radio wires that use computers. They are known as data bus or can bus systems. I'd avoid connecting to these.
- Q:all of my wiring seems okay and everything seems to work except for my amp power. I have the blue cord on the harness wired into the blue/white cord in my kenwood because i tried going blue to blue and it didnt work. So i have the remote cable from my amp plugged into the blue cord on my head unit. I have no power to my amp.
- Its usually a blue wire with a white stripe. If not, another option is to find your fuse box and stick it in with a fuse that powers the stereo or another fuse that only is active when the key is turned. Afterwards, make sure the amp turns off when the key is off, if not, select another fuse. This is how my amp is hooked up because when I originally installed it, I had a stock deck. Good Luck!
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
High Voltage Mining Cable 0.3/0.5kV,0.38/.066kV,1.9/3.3kV,3.6/6kV,6/10kV.
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 100 m
- Supply Capability:
- 100000 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products