High Quality Machining Graphite Electrodes for Steel Making with Guarantee
- Ref Price:
-
$10.00 - 100.00
/ m.t.
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 10 m.t.
- Supply Capability:
- 100000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Graphite Electrode for steel making
Applications
Used in EAF and LF for steel making, as well as in electric smelting furnace for producing industrial silicon, phosphorus, etc.
Programmable properties
1.Good electrical conductivity
2.High resistance to thermal shock
3.High mechanical strength
Grades:RP, RPI, HP, SHP, UHP
All graphite electrodes are offered with tapered nipples, i.e. 3 or 4 threads per inch, and meet the internationally accepted tolerances as per NEMA CG 1/ IEC 60239 / JIS R7201 standards.
FINE-GRAIN SPECIALTY GRAOHITE FXG-1
Physical and chemical index
Item | Unit | Guarantee Value | Typical Value |
Max Grante Size | mm | 0.8 | 0.8 |
Bulk Density | g/cm3 | ≥1.70 | 1.73 |
Specific Resistance | μΩ.m | ≤8.5 | 7.5 |
Bending Strength | MPa | ≥10.0 | 11.0 |
Compressive Strength | MPa | ≥24.0 | 27.0 |
Thermal Conductivity | W/(m.k) | ≥120 | 150 |
CTE (100-600)℃ | 10-6/℃ | ≤2.5 | 2.2 |
Ash Content | % | ≤0.3 | 0.09 |
FINE-GRAIN SPECIALTY GRAOHITE FXG-2
Physical and chemical index
Item | Unit | Guarantee Value | Typical Value |
Max Grante Size | mm | 0.8 | 0.8 |
Bulk Density | g/cm3 | ≥1.73 | 1.76 |
Specific Resistance | μΩ.m | ≤8.0 | 7.0 |
Bending Strength | MPa | ≥12.0 | 12.5 |
Compressive Strength | MPa | ≥31.0 | 34.0 |
Thermal Conductivity | W/(m.k) | ≥130 | 160 |
CTE (100-600)℃ | 10-6/℃ | ≤2.5 | 2.1 |
Ash Content | % | ≤0.3 | 0.09 |
FAQ
①How about your company？
A world class manufacturer & supplier of castings forging in carbon steel and alloy steel，is one of the large-scale professional investment casting production bases in China,consisting of both casting foundry forging and machining factory. Annually more than 8000 tons Precision casting and forging parts are exported to markets in Europe,America and Japan. OEM casting and forging service available according to customer’s requirements.
②How to guarantee the quality of the products？
We have established the international advanced quality management system，every link from raw material to final product we have strict quality test；We resolutely put an end to unqualified products flowing into the market. At the same time, we will provide necessary follow-up service assurance.
- Q: What are the factors affecting the service life of graphite electrode in ultra high power arc furnace?
- China's graphite electrode quality standard (YB/T4090-2000) to evaluate the quality of the ultra high power graphite electrode is defined 6 physicochemical indexes, including resistivity, flexural strength, elastic modulus, bulk density and linear expansion coefficient as the quality evaluation index, ash as a reference index.
- Q: Why should supercapacitors use graphite as electrode material?
- Because the graphite material's electrochemical stability is good, can let the super capacitor withstand the higher monomer voltage. The electrode is not easy to wear out.
- Q: What is the reason that the current cannot be increased when the graphite electrode is used for anode electrolysis?Add calcium chloride and sodium bicarbonate into electrolytic water
- The first answer to the equation above is quite right, or it may be that a layer of calcium carbonate is attached to the surface of the electrode, which prevents the electrode from conducting and leads to an increase in resistance
- Q: Graphite electrode specifications, graphite electrode manufacturers which good?
- Graphite electrode to Qingdao Chenyang graphite Co., quality assurance, trustworthy, we have been purchasing graphite electrode for them, you can ask them,
- Q: Synthesis techniques of carbon nanotubes
- Laser evaporation is an effective method for the preparation of single-walled carbon nanotubes. Single walled carbon nanotubes and single-walled carbon nanotube bundles were prepared by evaporation of carbon targets doped with Fe, Co, Ni or their alloy by high energy CO2 laser or Nd/YAG laser. The diameter of the tubes can be controlled by laser pulses. The researchers found that the shorter the laser pulse interval, the higher the yield of SWNTs, while the SWNT structure was not affected by the pulse interval time. Using CO2 laser evaporation method for single wall carbon nanotubes at room temperature, if the use of fast imaging technology and emission spectra can be observed in morphology of smoke and carbon containing debris flow evaporation in argon, the diagnostic technology makes the growth process of single wall carbon nanotubes tracking possible. The main disadvantage of laser evaporation (ablation) is that the purity of single walled carbon nanotubes is low and easy to entangle.
- Q: How long is the graphite electrode machining cycle?
- Industrial graphite is hard and brittle, and the tool is worn more seriously during machining. It is generally recommended to use carbide or diamond coated cutting tools. When the graphite is rough, the cutter can be directly worked on the workpiece. When it is finished, it is necessary to use light knife to walk quickly to avoid the occurrence of chipping and chipping
- Q: Graphitized coke, graphite, broken, mixed up, how to export?
- Graphite electrode pieces in different data definition of graphite scrap is different, some data and literature of the graphite particles are called not great pieces of graphite (such as graphite) and some say that graphite products have a certain size, into a block of graphite broken, we are here to say Shi Mosui is second, often called as the graphite block. The production of graphite from graphite products, graphitization and machining process. Graphite waste used as an additive and as a conductive material in the steelmaking and casting industries.
- Q: Electrolysis of CuCl2 solutions with graphite electrodes
- CuCl2 refers to a copper chloride ionization ionization ion and chloride ion in aqueous solution, the equivalent of CuCl2 does not exist, but there are only Cu2+ and Cl-, even if there is no electricity, the ionization will happen, because this is the nature of it.
- Q: How do graphitized electrodes differentiate between high power and low power?
- In an electrolytic cell, the current from a class called graphite anode plate into the electrolyte electrolysis industry, the anode is made of plate shape, so called graphite anode plate, widely used in electroplating, wastewater treatment, industrial anti-corrosion equipment or special materials.
- Q: What are pyrolytic graphite electrodes used for?
- The weight is lighter: the density of graphite is only 1/5 of copper. When the large electrode is used for EDM, it can effectively reduce the burden of machine tools (EDM). It is more suitable for applications on large moulds.
Send your message to us
High Quality Machining Graphite Electrodes for Steel Making with Guarantee
- Ref Price:
-
$10.00 - 100.00
/ m.t.
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 10 m.t.
- Supply Capability:
- 100000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
