Hand Stacker- LGA Series -Aluminum Alloy Material Lift
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
LGA Series product is a manual operating lift platform.There are multiple base, winch and load accessories to choose from. The max. rated load is 454 kg .It can raise up to 7.4 meters.
Product Specifications Table:
Model Lifting height Working length Rated load Overall length Overall width Overall heightLGA-10 LGA-15 LGA-20 LGA-25 mm 3000 4500 6000 7400 mm 1460 1840 2040 2040 kg 454 363 363 295 mm 740 740 740 790 mm 800 800 800 800 mm 1990 1990 1990 1990 Weight kg 117.9 143.8 183.7 204.1
Stackers are used to stack in different patterns, such as cone stacking and chevron stacking. Stacking in a single cone tends to cause size segregation, with coarser material moving out towards the base. In raw cone ply stacking, additional cones are added next to the first cone. In chevron stacking, the stacker travels along the length of the stockpile adding layer upon layer of material.
Stackers and reclaimers were originally manually controlled, with no means of remote control. Modern machines are typically semi-automatic or fully automated, with parameters remotely set. The control system used is typically aprogrammable logic controller, with a human-machine interface for display, connected to a central control system.
- Q:The repair process of forklift inspection
- In addition, many types of forklifts use batteries, which involves maintenance and maintenance of forklift batteries. The correct use of the battery includes proper charging, correct switching and so on. During the operation, we need to follow the instructions of the battery to charge the battery. Inadequate charging will shorten the battery life. Protective glasses and gloves must be worn when operating the battery, and the charger should be turned off before disconnecting the battery. Use batteries carefully, too. Regular maintenance in addition to the part can be conducted by the company's technical staff, others must by forklift supplier after-sales service professionals to operate. After a certain amount of time (10 hours, 50 hours, 100 hours, 200 hours, 500 hours, 1, 000 hours), the maintenance work should be maintained
- Q:Basic requirements for forklift operation
- Before the vehicle is used, it should be strictly inspected, strictly forbidden to go out of the car, not to be forced through the dangerous or potentially dangerous section of the road.
- Q:The forklift is limited in the factory area
- There's no specific speed limit for the forklift truck, 5KM? If say, the goods of factory assembly line is very big, can you be busy? Actually because of its different purposes and ordinary vehicles, forklift again because of its structure characteristic determines not speeding, so at the time of design is not designed to be fast, general fuel forklift with the highest speed, is about 22 km, the battery is 13 km or so commonly, whether in the warehouse or factory, or the ramp, the key is to see the driver's operation, if is is to limit the speed, fuel car can speed limits on the accelerator, the battery can adjust the height of the accelerator pedal, to limit, if you want to completely, seek after-sales personnel, the parameter adjust the speed of the electric control device.
- Q:What happens when you do the force forklift
- The engine was built for two months and the suspension was shaking both sides of the wheel.Look at the engine seat screw.
- Q:How long does the electric forklift replace the battery
- It's about two to three days 1.5 meters * 2 = 3 meters, Two tons of electric bottle forklifts are fully available at a height of 1.1 tons For now, domestic batteries need to be replaced with 750 charges. At your current workload, it will take at least four years. Of course also need to see the maintenance condition of the battery, maintain good can be able to use a bit longer. If the operation error is likely to be replaced in two or three years The product is detailed to the website of the company
- Q:The advantages and disadvantages of exhaust and exhaust in the forklift truck
- Imported forklifts are used for exhaust, and of course the cost will increase. The reason is that the height of the exhaust is exactly the same as in the middle of the body, which causes the pollution to spread to the human body, causing damage. The exhaust will blow up the dust of the ground and cause pollution. Are you satisfied with the answer?
- Q:How about the forklift truck training, the forklift wages
- The level of skills needed to be re-established for on-the-job staff, such as position transfer. About post to create positions, forklift worker trainee 1 to 3 months after the inspection qualified rear can formal mount guard after probation period, the trainee and obtainment of the wage level of different forklift worker hired for 1 to 3 months after the probation period, probation, organization work skill examination and confirmation, after assessment is eligible to positive after giving skills rating, according to the different level skills allowance, obtainment of outstanding achievement appraisal of employees can be paid or given directly across their post grades, but the largest for level 3. For those who have had the higher skills and experience in the position, they may be qualified as junior, intermediate or senior.
- Q:What is the meaning of a forklift?
- Gasoline cars, gas bottles like gas, gas forklifts Compared to diesel cars, petrol cars save energy, burn more, and, of course, emit more environmental protection. In short, it's the greenest and most environmentally friendly of the internal combustion forklifts. The price is more expensive!
- Q:What procedures are required for a forklift licence
- The forklift should be known Number one: you need information for the inspection (2) inspection of motor vehicles in the factory Certificate of forklift (original and copy of each) A copy of the owner's code certificate A copy of the business license of the owner It is not directly handled by the legal person (which is required to submit a power of attorney)
- Q:Battery lift truck charging requirement
- Charge note Do not unplug or turn off the power switch when charging, otherwise the plug and the electrical component will be damaged. When the charging authority is closed, the plug is removed. The truck. When configuring the electrolyte, do not pour water into sulfuric acid, lest the temperature of the liquid surface suddenly rise, and the boiling acid droplets will hurl
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Hand Stacker- LGA Series -Aluminum Alloy Material Lift
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products