Q:Kitchen faucet is not water is how is it?

The pool below the switch did not open, you try it

Q:How long is the kitchen faucet life?

If it is full of hot and cold water for five years no problem

Q:Is the faucet poor quality? But the faucet is Kohler, should not be bad. Do not know this is not a normal phenomenon, there is no way to restore the original tightness. More

Rust it on the point of oil to see

Q:Leading the use of 11 years, is Franca oblique mouth of the faucet, in the rotation of the water leakage, it may be broken ring it, I do not know whether it can be removed, replace the seal and how to dismantle the step floating chen Ying Nail film Have to know whether to teach me, brother Xianxie the. More

Kitchen hot and cold water leakage method: 1, remove the handle, see the faucet parts. Use a large carp pliers or an adjustable wrench to remove the packing nuts, and be careful not to leave scratches on the metal. Rotate the spool or shaft in the same direction as you rotate when you open the faucet to turn them off. Remove the screws that hold the washers. If necessary, use osmotic lubricants to loosen the screws. Check the screws and spool, if there is damage to replace the new one. Close the water supply and remove the small screws above or behind the faucet handle to remove the handle that is fixed to the main body of the faucet. Some screws are hidden under metal buttons, plastic buttons or plastic sheets, and these buttons or plastic pieces are caught or screwed into the handle. As long as you open the button, you will see the handle screw on the top. If necessary, use some osmotic lubricants like the WD-40 to loosen the screws. 2, with a completely the same new gasket replaced the old washer. The new washers, which are almost perfectly matched to the old washers, generally allow the faucet to drip no more. You should also note that the old washer has a bevel or flat and is replaced with the same new washer. Only the gasket designed for cold water will swell violently when there is hot water to block the outlet, making the hot water flow slow. Some washers can work in hot and cold water, but you have to make sure that the gasket you buy for replacement is exactly the same as the original one. 3, the new washer fixed to the spool, and then the components of the faucet re-installed. Rotate the spool clockwise. After the spool is in place, reload the packing nut. Be careful not to let the wrench leave scratches on the metal. Reinstall the handle and replace the button or disc. Reopen water supply and check for leaks.

Q:How to replace the warm and cold faucet of the kitchen sink

Hello there! First of all to close the water pipe of the total valve, and then you can replace the bad valve. Very simple, but have the tools to disassemble the valve. Thank you.

Q:Can the kitchen faucet be directly connected to the water?

Singapore water source, subject to strict filtration control, local Singaporeans both young and old, in the growth process, have drunk water sources, accustomed to.

Q:Rough room want to install a faucet pipe in the kitchen What are the end of the pipeline is closed the visual hand can not get rid of how to open the open? What tools can I use to complete it? Is there a water on the faucet? The There is no gates below the drainage pipe is also there is not connected to the water pipe can drain? The problem is a bit wordy but for the insiders is certainly a small meaning it Oh it <ji top hired murder ghosts who Han Ji br / & gt; satisfaction will certainly add the score Thank you added the problem added: that is almost such a pipe is sealed There is one more such outlet below

With the general can be unscrewed the tools on the line, but do not forget to twist before the lock off the top of the car dare to kill the devil who sabou first you have to know where the valve is not installed on the water

Q:How to repair the kitchen faucet at the leak? How can we remove it? Red arrows

Just below you in the red arrow that is Fu Fu reminders of the king of a large number of ketones can be rotated a joint nut. Turn it down counterclockwise, you can get the water pipe above. After you win you can see a pipe under the water pipe joints, from the sealing effect. Take the apron to check to see if there is no damage, if the damage is necessary to replace one. If there is no damage, that you screw down the joint nut did not screw in place, did not put the rubber ring, re-installed, the nut can be tightened. My home is also often leak this place, because the water pipe often turn around, for a long time that nut will be loose joints, a loose, the following apron can not afford to seal the role, and re-tighten the lock nut can be. This kind of faucet problems are like this.

Q:Kitchen faucet around turn up not working, what good way?

New! That is to be broken. You still waiting for it suddenly how to run water?

Q:The kitchen with the faucet to buy back, but do not know how to install ah?

The kitchen with the faucet to buy back, but do not know how to install ah?