Ductile Iron wafer butterfly valves DN310

Ref Price:
Loading Port:
Tianjin
Payment Terms:
TT OR LC
Min Order Qty:
100 set
Supply Capability:
80000 set/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Size:

DN50-DN1000

End flange:

ANSI B 16.1,EN1092,AS2129

Face to face:

ANSI B 16.10

Top flange:

ISO 5211

Normal pressure:

PN1.0/1.6MPa(150/200PSI)

Body:

CI/DI/WCB/ALB/CF8/CF8M

Disc:

DI/ALB/Rubber lined Disc/1.2501/1.4529/CF8/Hastelloy Alloy/Monel

Stem:

410/416/304/431/17-4PH/316/monel

Seat:

NBR/Hypalon/EPDM/Neoprene/NR/Wear-Resistant EPDM/Viton/Silicon/Heat-Resistant EPDM/White EPDM/EPDM(NSF)/PTFE

Suitable temperature:

-10~120

Medium:

Fresh water, sewage, sea water, air, vapor, food, medicine, oils, alkalis, salt etc. 

 

A butterfly valve consists of body ,stem ,disc , actuator (manual actuator, worm-gear actuator , aerodynamic actuator or electric actuator) , and wafer type butterfly valve can implement the process for turning on turning off and regulating the flow by the circumrotation of stem and disc  that is droved by actuators.
 

1.Simple and compact construction. Small in size and light in weight. Easy transportation, installation and maintenance.
2. Quick 90 degrees on-off operation. Minimized operating torque ,energy saving.
3. Excellent sealing performance with no leakage. Long service life.
4. Wide selection of materials ,applicable for various media..
5. Flow curve tending to straight line. Excellent regulation performance.

 

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Is the pressure test of the centerline butterfly valve checked or checked?
Every factory factory must require pressure tests.
Q:The difference between butterfly valve d71x_10s and d341s-10
Before distinguishing between the two, you must first read the identification of the valve type:D stands for butterfly valves,3 means that the worm gear is connected and the drive does not indicate the handle7 and 4 indicate pipe to clamp connection, pipe flange connection, respectively1 means single eccentric, that is, the stem is not in the center of the butterfly plateThe former S indicates the material name of the valve body - plastic, X means sealing and the lining material is rubberThe latter S indicates the sealing lining material code ---- plastic, and the valve body is cast iron.10 means stress.
Q:What's the difference between a clip on handle butterfly valve and a turbo butterfly valve? Where are they used?
1, the drive mode is different (handle or turbine), mainly based on the size of the valve and the opening and closing torque to decide.2. The butterfly plate of the worm valve is installed in the direction of the diameter of the pipe. In the butterfly valve body cylindrical channel, the disc shaped butterfly plate revolves around the axis, the rotation angle is 0 degrees ~90 degrees between, when rotates to 90 degrees, the valve opens the card completely.3, clip type butterfly valve is to use double headed bolts to connect the valve between the two pipe flanges, flange butterfly valve is a valve with a flange, bolt with the valve flange at both ends connected to the pipe flange.
Q:Butterfly valve general use occasions
Butterfly valve general use occasions:1 、 soft sealing butterfly valve applies to ventilation, dust removal pipeline two-way opening and closing and adjustment, metallurgy, light industry, power, petrochemical systems, gas pipelines and waterways.2, metal sealed double eccentric butterfly valve, suitable for heating, steam, water and gas, oil, acid and other pipelines, as the adjustment and closure devices.3, metal seal three eccentric butterfly valve, in addition to as large pressure swing adsorption gas separation control valve.4, metal seal three eccentric butterfly valve, can be widely used in petroleum, chemical, metallurgy, electricity, food, medicine, water supply and drainage, gas transportation and other fields.
Q:Gate valve and butterfly valve which is installed when there is a direction?
Do not require frequent opening and closing, and keep gate fully open or fully closed. Not suitable for use as a regulator or throttling.Butterfly valve refers to the closure of parts (butterfly plate) as the disk, around the valve shaft to achieve rotation and closing of a valve, the main cut off on the pipe and throttling role. Butterfly valve headstock is a disc shaped disc, in the valve body around its own axis of rotation, so as to achieve the purpose of opening or closing or regulation. Butterfly valve is fully open to fully closed is usually 90 degrees butterfly simple structure, small volume and light weight, only by a few parts. Moreover, the utility model can be rapidly opened and closed only by rotating 90 DEG, and the operation is simple.Is the gate valve opening and closing parts, RAM direction of motion perpendicular to the direction of the fluid, valve can only be fully open and fully closed, can not be adjusted and the throttle. Gate has two sealing surface, gate valve advantages: fluid resistance is small, opening and closing more effort, medium flow unrestricted, not disturbing flow, do not reduce pressure.
Q:Big block, solid lifter, valve clearances?
Well, generally it's going to be .030 intake and exhaust (hot). Adjust to those clearances cold then recheck at operating temp. But it would really help to know year, make, cu. in., which aftermarket heads, to be absolutely sure. On some engines it is .024 intake / .030 exhaust and so on, depends on the lifters and valve train geometry.. What brand of lifters and cam profile? Usually they will specify valve lash and adjusting procedures. Edit: Wow, kinda' tight valve lash, krazybob, ( might be a lttle tough on the old cam lobes), and then there is your timing numbers / advice with absolutely no details to base it on ( H.E.I.?..which brand? / mechanical advance curve?, and vacuum advance numbers?, cam timing, brand of lifters, cam specs, rocker arm ratio)...Look, S-51D, the best idea is to Do- It- Right using the correct adjustment specs. The data is out there, once the configuration is identified.
Q:1989 chevy silverado 2500 need to change valve seals?
First find out if that is the issue. Do a wet/dry compression on all the cylinders. That is where you do a compression test on all the cylinders and write them down. Then squirt about three pumps of oil from a oil can into each cylinder and retake the compressions. If the compressions don't change and are low, the valves are burnt and you need a valve job. If the compressions go way up after the oil seals the rings, then the piston rings are bad and the engine needs rebuilding and that may be where the oil smoke is coming from. If all the cylinders are within 20 psi and runs good, then it may be your valve guide seals are bad. You can replace them without pulling the heads. You can go to an auto parts store and buy a valve spring compressor that is used while the head is on the block. It has an air fitting that screws down into the spark plug hole and when filled with compressed air, holds the valves up while you remove the spring and replace the valve guide seal.
Q:How can one - way sealed butterfly valves and two-way sealed butterfly valves be distinguished?
Two way hard sealing butterfly valve:Two way butterfly valve on the valve body usually does not indicate the direction of the media arrow sign, in the design of two-way sealing butterfly valve stem force is greater than one-way butterfly valve stem. The same diameter, pressure butterfly valve, two-way sealing butterfly valve rod diameter than one-way sealing butterfly valve stem diameter. At the time of installation, the butterfly plate can face or back the direction of the medium, without considering the flow direction of the medium.
Q:Which is expensive, butterfly valve?
Gate valve and butterfly valve can not simply take the price there to compare, look at the actual design requirements of the project. General small caliber are selected by the valve, because of better sealing performance, service life is long, the maximum diameter of valve is usually choose to use the butterfly valve to the pipeline DN800800 above, because the valve is cheap, the price is only half of the large diameter valve. Also some pipes from the use of quality point of view, will choose the gate valve. How to use it, please mark the map
Q:Butterfly valve, two-way pressure and one-way pressure what is the difference?
The positive pressure and the reverse pressure, the pressure when the medium returns

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range