Cutting and Transporting Equipment---Operating Equipment---Hydraulic Shuttle
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 50 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Hydraulic Shuttle
Specifications | Walking Speed(m/s) | Maximum load(t) | Motor Power(kw) | Cylinder | Applicable Kiln Type |
ZWBD-1 | 0.1/0.2 | 30 | 2.2+1.1 | Ø63 s=160x2 | 3.6m |
ZWBD-2 | 0.1/0.2 | 40 | 3+1.1 | Ø63 s=160x2 | 4.2m |
ZWBD-3 | 0.1/0.2 | 60 | 4+1.1 | Ø63 s=160x2 | 4.8m |
ZWBD-4 | 0.1/0.2 | 90 | 5.5+1.1 | Ø63 s=160x2 | 4.8m above |
The hydraulic shuttle is characterized in that it includes a frame, and the frame is provided with a positioning mechanism and a traveling mechanism, and the positioning mechanism includes a telescopic device and a positioning rod connected with it; the traveling mechanism includes a power device and a traveling mechanism. The connected active wheels are placed on the rails on both sides of the frame. Compared with the prior art, the utility model has the characteristics of rail brackets, the hydraulic transmission positioning part is relatively stable, and the positioning can be automatically adjusted.
- Q: what are the auxiliary machinery found in ships?
- Ships auxiliary machinery is EVERYTHING which is vital to the operation of the vessel apart from the main engines and in the case of steamers, the boilers. In addition to the boilers and propulsion machinery, the engine room also contains most of auxiliary machinery to run the rest of the ship's systems. Steam or diesel driven generators provide electricity for the ship's lights and motors. There are centrifugal separators for turbine gear oil on steam turbine propelled ship and for fuel oil on diesel ships. An electrical distribution panel to allow control of the ship's electrical systems. On diesel powered ships, there are air compressors and receivers for starting air for the main and auxiliary engines. Refrigerated ships have refrigerant compressors to maintain the temperature of the holds. There are also steam or electrically powered pumps for clearing the bilges, transferring ballast, pumping feed water, circulating cooling water, pumping cargo, etc. etc. etc. Outwith the engineroom there are winches and cranes for cargo handling, windlasses, mooring capstans and most importantly the steering gear.
- Q: Royal Co. acquired new machinery with a list price of $700,000. At the date of Purchase they received a $7,000 cash discount and paid $2,000 of delivery charges. Installation and worker training costs were $46,000 and $14,000 respectively. During installation, worker negligence caused $15,000 damage to other machinery in the factory building. What is the acquisition cost for the machinery?I am unsure what to include, deduct or add in the calculation. Any help would be great!
- Acquisition Cost Accounting
- Q: Teflon rod material in the mechanical processing how to get the surface smoothness and clean surface
- ?In the mechanical processing to pay attention to the requirements of four aspects: processing PTFE requires a sharp tool sharpening, it can not use carbide cutting tools, because the carbide cutter can not sharpen the sharp; second can not add coolant ; The third must have a reasonable speed (through the test); the last point to have a reasonable knife depth and feed (through the test). The surface roughness problem solves the problem that the surface must be clean.
- Q: I bought an Oasis Machinery Dust Collector. Any free replacement bags?
- es okorder
- Q: Please include your reference. Thank you.
- From their web site: ?The Association for Computing Machinery was founded as the Eastern Association for Computing Machinery at a meeting at Columbia University in New York on September 15, 1947. Its creation was the logical outgrowth of increasing interest in computers as evidenced by several events, including a January 1947 symposium at Harvard University on large-scale digital calculating machinery; the six-meeting series in 1946-47 on digital and analog computing machinery conducted by the New York Chapter of the American Institute of Electrical Engineers; and the six-meeting series in March and April 1947, on electronic computing machinery conducted by the Department of Electrical Engineering at Massachusetts Institute of Technology. In January 1948, the word Eastern was dropped from the name of the Association. In September 1949, a constitution was instituted by membership approval.
- Q: What was the last thing that prevented you from driving or operating heavy machinery?
- All the damn hippies surrounding it trying to stop me from taking down those trees because squirrels live there. I was about to run the over, the hippies not the squirrels, but the boss said no.
- Q: why are larger fields needed for machinery such as combine harvesters,tractors and ploughs?
- Efficiency.
- Q: I need to find artists or phootgraphers who used machines in their work, engines and steam engines.
- H. okorder /
- Q: electric digram for desel generator wih 105 kva
- Sir, okorder to the concerned department and our engineers can support you with with your requirement.
- Q: I have a stepson who has a keen interest in combine harvesters and I had the idea to take him to see them being built at a farm machinery manufacturer somewhere, but have no idea who to enquire for about this and whether they would allow a factory tour to see these machines being put together. Does anyone have information that could be of help to me to arrange this for him as a surprise day out? Thanks.
- John okorder /
Send your message to us
Cutting and Transporting Equipment---Operating Equipment---Hydraulic Shuttle
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 50 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches