Q:Are there any requirements for the weld grade of the curtain wall connection? Thank you!

General curtain wall of the weld if there is no special requirements, then the three welds.

Q:Used in the glass canopy on the distance between the claw claw how much, generally what is required in the canopy, I consult a few, the difference is a bit big, dizzy.

Usually stay between 10mm glass glue joints, connections are two glass center hole spacing 220mm, from the heart to the glass edge of the hole is: (220-10) / 2 = 105mm

Q:What is the good thing?

A professional engaged in point-supporting curtain wall components, marble pendant research, development and production of medium-sized enterprises.

Q:Members of the master is good, I want to pull the claw side of the stainless steel support the side of the glass, one side installed in the antiseptic wood, please practice in the anti-wood that side how to install, how fixed on the wood preservative.

Conventional shape Four claws, three claws, two claws 90 degrees, two claws 180 degrees, long claws, short claws, K-type claws,

Q:Curtain wall decoration line junction how to take a good connection

With a strong bond strength, crack resistance, anti-hanging, freeze-thaw resistance, waterproof and other effects. Easy to use.

Q:Glass curtain wall claw should be how to calculate the size

In general, our factory will be based on the customer's glass area and glass thickness, to advise customers to choose what specifications of the split jaws, common splicing claw specifications are: 150.160.200.220.250 and so on. Be sure to choose the appropriate type and specification of the splicing jaws so that both price and performance are guaranteed

Q:The production of curtain wall glass splicing claws of the big brand which several!

In accordance with the light box instructions to open to their company to see their factory has not a basketball court, and inside a few lathes, inside the factory inside the office there are several pieces of claw samples, the production of claw pieces of a machine are not, This scale

Q:What is the difference between tempered glass shed and tempered glass and canopy sunshine shed?

Light steel glass canopy focus on just the material for the light steel, tempered glass canopy focus on the glass material for the tempered glass, are glass canopy, but the name of the focus is not the same, light steel glass canopy glass can also be used Glass ah The loads of light steel canopy include the weight, wind load, snow load and live load, in which the snow load is not taken into account, the wind pressure is positive or negative, a certain range of negative pressure is beneficial to the structure, the actual calculation Considered separately. Through the comparison, the design and calculation of the most unfavorable conditions of the combination of the dead weight, the wind load and the live load are carried out, including the calculation of the force combination of the glass and steel glass sheds, the calculation of the glass strength and the checking of the glass deflection, and finally the selection of the material The In the light steel glass canopy glass plate drilling processing, the connection part of the support device in advance openings, add water seal ring processing, to avoid the site to produce a higher stress concentration. Light steel glass canopy should be wiped clean before the surface, and according to the weight of the glass to determine the reasonable number of suction cups to ensure the safety of construction. By connecting the jaws to connect the glass, the installation should be checked before the glass drilling and splicing claws connected to the casing position, and timely adjustment. After the glass is fully installed, check the flatness and verticality of the light-glass glass canopy, the glass seam, and the width of the light-glass glass canopy to meet the needs of the shed in the temperature change and the structural displacement. Touch the request at the same time in the seam when the tensile deformation of their own to meet the temperature changes and structural lateral displacement of the joints to widen the requirements.

Q:Curtain wall windows fixed glass with what accessories

Spliced joints and welding base are adjustable, the conventional glass thickness is 12MM, such as the thickness of the glass thicker need to make binding joints, split jaws can also be lengthened and open arc Splicing claws, access head, plum glass jaws and other curtain wall accessories of the material: made 202,304 #, 316 # stainless steel four claws (sets), including four split joints and a split claw Three claws (sets) consist of three split joints and one splicing jaws Two claws (sets) consist of two split joints and a 90 ° cargo 180 ° claw claw claws (sets) including long and short sheets containing a splice joint and a splicing claw

Q:What are the accessories of the point-supported glass curtain wall?

Mainly to connect joints, splicing claws, adapter, fixture, support rod, cable, rod, etc., what difficulties can say ah, I can help you solve the initial ah