CNBM Solar Monocrystalline 125mm Series 45W

Ref Price:
Loading Port:
Shanghai
Payment Terms:
TT OR LC
Min Order Qty:
1000 watt
Supply Capability:
20000000 watt/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Item specifice:

Material: Monocrystalline Silicon Max. Power(W): 45 Number of Cells(pieces): 36

Product Description:



Materials


Silicon


Guarantee


12 yrs free from defects in materials and workmanship

No less than 90% within 10yrs and no less than 80% within 25yrs

TUV(IEC61215&IEC61730), CE, UL


Application


Photovoltaic/ solar/ green energy/ energy saving


Descriptions


1.High efficiency crystalline silicon solar cell. Even if under the weak light, the solar module can produce maximum power output.

2.Tempered glass (toughened glass): Anti-reflecting coating and high transmission rate glass increase the power output and mechanical strength of solar module.

3. EVA and TPT: Using high quality EVA and TPT to prevent destroying and water.

4. AI frame: Without screw, rner connection. 6 holes on the frame can be installed easily.

5. Junction box: Multi function junction box with water proof.

6. Long lifetime: ≥25 years; Less power decrease.

7. Good performance of preventing from atrocious weather such as wind and hails.

8. Resisting moisture and etching effectively, not effected by geology.

9. The certificate issued by international authority: UL, TUV, IEC, CE.


Packaging Details



26pcs/pallet, 28pallets/ 40HQ 

Our solar panels are packed in cartons, and then pallet. 

Shipping by sea or by air are both ok, it up to customer’s chose.

We’d like to inquiry the freight cost for customer after be informed exact quantity and destination address.


CNBM International Corporation is a professional solar panel manufacturer in China for CNBM brand . Silicon panel ( silicon module), as our main product, has high quality and good service. Our products are very popular in Europe, Australia, England, Middle East, Mexico, Argentina, Chili, Singapore and Africa.Furthermore, our products have gained international authorized certificates like TUV, UL and CE.


.png.png

.png


Why Choose Us


A. Professional Manufacturers , Strict quality control & power classification Silicon Solar PV Module

B. 100% A grade solar cell with Positive tolerance power range.

C. High Conversion Efficiency , High transmission rate , low iron tempered Anti-reflecting/coating film 3.2mm glass

D. Anti-aging & high visosity EVA

E. high frame resistant & Double-sided fluorine TPT

F. Anodized aluminum alloy high thickness frame

G. 3 or 6 bypass diodes , 90mm 4m2 cable , MC4 connectors & waterproof junction box

H. Long life, Easy installation, high wind & hail impact resistance

I. Be resistant to atmospheric exposure & effects of delamination

J. ISO9001:2008/ISO14001:2004/OHSAS18001:2007/ CE /TUV/CEC/ IEC/EN61215 IEC/EN61730/CHUBB INSURANCE

K. 10Years Manufacturing Quality Warranty , 10Years 90% Power output Warranty, 25Years 80% Power output Warranty



Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:_How many solar panels needed to light up a whole house?
this is according to the load, that is to say, how many electricity do you need in one day.
Q:How do you set up 30w solar panel?
With a 30 watt panel, producing about 2 amps, your not going to have much power from that. A 22 AH battery will give you 2 AH of usage. A battery should never be drained below 50%. What this works out to be is simply Amp draw for 2 hours. Which equals to 2V light bulb that draws amp for 2 hours. Not much. Now to replace that usage with your 30 watt panel, provided the panel is clean and in max sunlight, it will take 6 hours. If you attach an inverter to your system for 5 Volt Usage then the DC voltage drawn from the battery is very high. Example: Say you use a 5 Volt component that requires 50 Watts per hour to operate. The inverter will draw 5 Amps out of the Battery every hour to operate that component. That gives you and /2 of use before the battery is down to 50%.. Maybe that will be enough to charge up a standard Laptop battery. I have 2 30 Watt panels that produce 5 Amps, 4 6V batteries that have 480 AH and a 25 Amp Controller with a booster that increase the amp output to 20 Amps per hour. I live full time in an RV and raise the panels to get max output when I am parked. This system provides me with all the 5V throught the 500 Watt inverter that I need. Good luck on you system.
Q:what is the cost of a solar panel
With out the kW information of the need for your workshop no one can really tell you what you need for power supply. I would recommend you orientate your building or shop to maximize the passive solar potential. this will drastically eliminate your excessive need for heating and cooling. Which in turn will maximize your solar energy from the panels. Also depending upon what state you live in do some further research into any programs or grants offered by the power companies or state incentives. Regarding hydrogen...for get about it.
Q:Best orientation for my solar panel?
It doesn't make sense to me. I am at latitude 37.7,and my panels face south at about 38 degrees. Yours should be pointed north as you suggest. Being so close to the equator, and in the absence of any better information, an angle of 2 degrees would be appropriate. However, choosing the best angle will greatly to your overall efficiency, so I would try to find a more credible source, How about the folks from whom you buy the panels. They would know precisely. By the way, if you haven't installed the system yet you might consider going to a high voltage system to cut known line losses in the conductors between the panes and the inverter, I did that plus increasing the conductor size over that recommended by the manufacturer. I gained about two percent in efficiency
Q:Is it worth installing solar panels on a house that has no South-facing roof?
In your case you will need twice as many panels. This is because the panels on the west side of the roof will be in shade in the morning and the panels on the east side of the roof will be in shade in the afternoon, and a solar panel in the shade makes no power, or at least very little power. So right there you doubled the cost of an already too expensive system. Or you could build special stands to hold the panels facing south. It would be cheaper to just move to a house with better alignment!
Q:How to build a small SOLAR PANEL that will light a 60 watt light bulb?
I don't have any practical experience building solar panel arrays to power a given device, but allow me to make this observation. Solar cells, when exposed to sunlight, will each generate a given amount of power (watts), and by wiring these in series, you will increase the wattage. Now, a panel three feet square will give you a certain amount of power, provided all the cells are wired correctly in series, and it may not provide enough juice to light the bulb. You can work around this by adding a step-up transformer (which takes the incoming power and boosts it to the desired level for output, with no moving parts). Voila! You've illuminated your bulb. I will admit, though, you'll have to do some math to determine what you need. A search on the Web will help you find the formulae and other information you'll require. Good luck.
Q:solar panel questions.....................?
No don't do that unless you want a fire or worse electricution . DO NOT PLUG INTO THE WALL . st solar panel 2nd regulator 3rd 2 volt battery 4th inverter . The inverter should have 0 volt terminals that look like the plug on the wall . You would plug your TV or light into that the inverter . You would need an electrition to hook into your home electrical system . They will hook up a device made to tie into the grid or your meter that will make it run backwards but it takes alot of solar panels too do that . Please do not plug into wall .
Q:What size and watt solar panel?
I think that typical solar panels are 2'x4' and produce something like 800-000 wh per day. (That's 0.8 - kwh per day.) More in the summer, less in the winter, if they're aimed sort of at the sun. There are newer, more expensive panels that produce more. There are also thin film panels that are less expensive, and probably more sturdy. You then have a couple choices. In a house, you'd have an expensive inverter to connect to the utility power, so you can have power at night when your panels aren't generating anything. In a trailer, you want 2-4-6 deep cycle car batteries to store the power. Then you could have an inverter to convert that power to 20v AC, so you could use normal appliances. Or, you could buy appliances that run on 2 volts DC. Maybe a combination of both. You'll need to figure out how much power you're going to use, so you know how many panels and batteries you're going to need. The calculation is easy. Figuring out how much power you need is hard. You need deep cycle batteries because you can repeatedly charge them way up and run them way down. Ordinary batteries die fairly quickly when you do that.
Q:How solar panels and furnaces work?
Well solar panels conduct electricity from the suns waves and turns it into dc current then it is either put into a grid tie inverter to change it to AC and it makes you meter go backwards instead of forwards. or if its not a grid tie inverter it is just put into batteries as dc then changed into AC from the inverter and then used for household appliances. nothing really does run on DC that is why it has to be changed. and for solar furnaces if you mean a water heater that works by a substance here in Pa its antifreeze is heated up by the sun in the panel it is in a continous loop and that is what gets heated up the water then flows over tow of the tube that contains what ever substance such as antifreeze and heats the water.were the water and the tube that changes the water from cold to hot is called the heat exchanger. the substance is actually get heated first then the water. solar heating for water accounts for 29% of water heating in the us. Now if you mean solar furnace as in passive solar thats completely different because here in Pa if we want it our houses have to face to south to get the suns rays. (alot more windows) and there is a cement slab placed only on the south side of the house and it has insulation covering it. There is a certain type of glass that is used for this that will allow the suns rays to come in and let the heat in for the summer and also for the winter. the main place for that would mostly be the first floor of the house due to the height of the windows and the angle of the sun(pa in the summer is 73 degrees and in the winter its 27 degrees) thats when the second floor would be ok to heat the rooms. Hopefully i helped and i explained it in a way that you can understand.
Q:Advantages and Disadvantages of using solar panels?
Initial cost , space occupied AND DAILY CYCLE (unless through a battery) are the only disadvantages. REST ARE ALL ADVANTAGES

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range