Climbing Bracket formwork system
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Climbing Bracket CB240 & CB210
They are framework brackets for supporting large-area wall formwork.
Typical applications for the CB240&CB210 are pier and column/shear wall/core walll/ in the
building.
CB210 has smaller size than CB240, it will be cost effective in some condition.
Characteristics:
◆ High bearing capacity
The high loading capacity of the brackets allow very large scaffold units. This saves the number
anchor points required as well as reducing climbing times.
◆ Simple moving procedure by crane
Through the strong connection of formwork together with the climbing scaffold, both can be moved
as a single climbing unit by crane. Thus valuable time-savings can be achieved.
◆ Fast striking process without a crane
With the retrusive set, large formwork elements can also be retracted quickly and a minimum of
effort.
◆ Safe with work platform
The platforms have assembled firmly with bracket and will be climbing together, without scaffolding
but can work safely in spite of your high location.
- Q:Is the car seat with lumbar support adjustable?
- It is better to find a mat what to deal with the first look, and slowly find the factory and this opportunity to change it. Also not for this function to give up the favorite models!
- Q:JGJ128-2000 door type steel scaffolding specifications only adjustable adjustable screw extension of the base of the relevant provisions of the top of the screw extension of the length of no provisions, but in the specification check the inspection items to check the extension of the screw extension length. What is the standard?
- JGJ128-2000 (JGJ128-2000) Section 9.1.4 of the door type steel pipe scaffolding used as a template support and full of scaffolding, adjustable base adjustment screw extension length should not exceed 200mm. When more than 200mm, the design value of a mast bearing capacity, that is, this specification (5.2.1-5) type Nd should be adjusted according to the adjustable seat extension screw length correction: extension length of 300mm, should be multiplied by the amendment Coefficient 0.90, more than 300mm, should be multiplied by the correction factor 0.80. The height of the template support frame should be adjusted with adjustable jacking.
- Q:Scaffolding brace has several models, respectively, can bear the load?
- They are a lot of good quality models of course, bear the strength of the larger
- Q:Why 2013 BMW 320LI no waist support regulation, and now 2014 models are still not, as a luxury brand is difficult to understand
- Because it is low-end BMW models, like the 7 series of these have
- Q:BMW 3 Series driver seat waist support how much money
- In general, the manual lumbar support adjustment knob is mounted on the side of the seat, the electric waist support adjustment button near the power seat adjustment button, the electric waist support adjustment is divided into two-way adjustment and four-way adjustment.
- Q:The permissible range of the top support of the template
- Construction site on the adjustable top care, adjustable base is more common, especially in the template support system inside.
- Q:What does the car support for the waist?
- Should be placed on the waist of the seat that seat, support the waist, the seat is more comfortable
- Q:Car plus a tire pressure detection and waist support adjustment about how much money
- Waist support is best airbag, and now have a manual charge and discharge airbags lumbar 50 yuan
- Q:Support on why there is adjustable support and support the set position, that is, where to put any place can not put?
- Why use adjustable: because each location of the template height is not the same, adjustable support can be more practical need to control
- Q:Yee Jun Edition Octavia with waist support adjustment?
- Yes, twist for a long time, the waist did not feel the support of the changes, waist down to turn, not sour, it is estimated that the legendary manual adjustment it,
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Climbing Bracket formwork system
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
Offcanvas right
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords